* [PATCH v5] gpio: mmio: handle "ngpios" properly in bgpio_init()
@ 2023-07-10 21:49 Asmaa Mnebhi
2023-07-18 18:18 ` Bartosz Golaszewski
0 siblings, 1 reply; 5+ messages in thread
From: Asmaa Mnebhi @ 2023-07-10 21:49 UTC (permalink / raw)
To: andy.shevchenko, linus.walleij, bgolaszewski, brgl, linux-gpio,
linux-kernel
Cc: Asmaa Mnebhi, davthompson
bgpio_init() uses "sz" argument to populate ngpio, which is not
accurate. Instead, read the "ngpios" property from the DT and if it
doesn't exist, use the "sz" argument. With this change, drivers no
longer need to overwrite the ngpio variable after calling bgpio_init().
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
drivers/gpio/gpio-mmio.c | 9 +++++-
drivers/gpio/gpiolib.c | 68 ++++++++++++++++++++++------------------
drivers/gpio/gpiolib.h | 1 +
3 files changed, 46 insertions(+), 32 deletions(-)
diff --git a/drivers/gpio/gpio-mmio.c b/drivers/gpio/gpio-mmio.c
index d9dff3dc92ae..b52a3dd511ca 100644
--- a/drivers/gpio/gpio-mmio.c
+++ b/drivers/gpio/gpio-mmio.c
@@ -60,6 +60,8 @@ o ` ~~~~\___/~~~~ ` controller in FPGA is ,.`
#include <linux/of.h>
#include <linux/of_device.h>
+#include "gpiolib.h"
+
static void bgpio_write8(void __iomem *reg, unsigned long data)
{
writeb(data, reg);
@@ -614,10 +616,15 @@ int bgpio_init(struct gpio_chip *gc, struct device *dev,
gc->parent = dev;
gc->label = dev_name(dev);
gc->base = -1;
- gc->ngpio = gc->bgpio_bits;
gc->request = bgpio_request;
gc->be_bits = !!(flags & BGPIOF_BIG_ENDIAN);
+ ret = gpiochip_get_ngpios(gc, dev);
+ if (ret)
+ gc->ngpio = gc->bgpio_bits;
+ else
+ gc->bgpio_bits = round_up(gc->ngpio, 8);
+
ret = bgpio_setup_io(gc, dat, set, clr, flags);
if (ret)
return ret;
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 251c875b5c34..7dac8bb9905a 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -700,6 +700,40 @@ void *gpiochip_get_data(struct gpio_chip *gc)
}
EXPORT_SYMBOL_GPL(gpiochip_get_data);
+int gpiochip_get_ngpios(struct gpio_chip *gc, struct device *dev)
+{
+ u32 ngpios = gc->ngpio;
+ int ret;
+
+ if (ngpios == 0) {
+ ret = device_property_read_u32(dev, "ngpios", &ngpios);
+ if (ret == -ENODATA)
+ /*
+ * -ENODATA means that there is no property found and
+ * we want to issue the error message to the user.
+ * Besides that, we want to return different error code
+ * to state that supplied value is not valid.
+ */
+ ngpios = 0;
+ else if (ret)
+ return ret;
+
+ gc->ngpio = ngpios;
+ }
+
+ if (gc->ngpio == 0) {
+ chip_err(gc, "tried to insert a GPIO chip with zero lines\n");
+ return -EINVAL;
+ }
+
+ if (gc->ngpio > FASTPATH_NGPIO)
+ chip_warn(gc, "line cnt %u is greater than fast path cnt %u\n",
+ gc->ngpio, FASTPATH_NGPIO);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gpiochip_get_ngpios);
+
int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
struct lock_class_key *lock_key,
struct lock_class_key *request_key)
@@ -707,7 +741,6 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
struct gpio_device *gdev;
unsigned long flags;
unsigned int i;
- u32 ngpios = 0;
int base = 0;
int ret = 0;
@@ -753,36 +786,9 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
else
gdev->owner = THIS_MODULE;
- /*
- * Try the device properties if the driver didn't supply the number
- * of GPIO lines.
- */
- ngpios = gc->ngpio;
- if (ngpios == 0) {
- ret = device_property_read_u32(&gdev->dev, "ngpios", &ngpios);
- if (ret == -ENODATA)
- /*
- * -ENODATA means that there is no property found and
- * we want to issue the error message to the user.
- * Besides that, we want to return different error code
- * to state that supplied value is not valid.
- */
- ngpios = 0;
- else if (ret)
- goto err_free_dev_name;
-
- gc->ngpio = ngpios;
- }
-
- if (gc->ngpio == 0) {
- chip_err(gc, "tried to insert a GPIO chip with zero lines\n");
- ret = -EINVAL;
+ ret = gpiochip_get_ngpios(gc, &gdev->dev);
+ if (ret)
goto err_free_dev_name;
- }
-
- if (gc->ngpio > FASTPATH_NGPIO)
- chip_warn(gc, "line cnt %u is greater than fast path cnt %u\n",
- gc->ngpio, FASTPATH_NGPIO);
gdev->descs = kcalloc(gc->ngpio, sizeof(*gdev->descs), GFP_KERNEL);
if (!gdev->descs) {
@@ -947,7 +953,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
/* failures here can mean systems won't boot... */
if (ret != -EPROBE_DEFER) {
pr_err("%s: GPIOs %d..%d (%s) failed to register, %d\n", __func__,
- base, base + (int)ngpios - 1,
+ base, base + (int)gc->ngpio - 1,
gc->label ? : "generic", ret);
}
return ret;
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index cca81375f127..8de748a16d13 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -217,6 +217,7 @@ int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce);
int gpiod_hog(struct gpio_desc *desc, const char *name,
unsigned long lflags, enum gpiod_flags dflags);
+int gpiochip_get_ngpios(struct gpio_chip *gc, struct device *dev);
/*
* Return the GPIO number of the passed descriptor relative to its chip
--
2.30.1
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v5] gpio: mmio: handle "ngpios" properly in bgpio_init()
2023-07-10 21:49 [PATCH v5] gpio: mmio: handle "ngpios" properly in bgpio_init() Asmaa Mnebhi
@ 2023-07-18 18:18 ` Bartosz Golaszewski
2023-07-18 18:34 ` Andy Shevchenko
0 siblings, 1 reply; 5+ messages in thread
From: Bartosz Golaszewski @ 2023-07-18 18:18 UTC (permalink / raw)
To: Asmaa Mnebhi
Cc: andy.shevchenko, linus.walleij, bgolaszewski, linux-gpio,
linux-kernel, davthompson
On Mon, Jul 10, 2023 at 11:49 PM Asmaa Mnebhi <asmaa@nvidia.com> wrote:
>
> bgpio_init() uses "sz" argument to populate ngpio, which is not
> accurate. Instead, read the "ngpios" property from the DT and if it
> doesn't exist, use the "sz" argument. With this change, drivers no
> longer need to overwrite the ngpio variable after calling bgpio_init().
>
> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---
Applied, thanks!
Bart
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v5] gpio: mmio: handle "ngpios" properly in bgpio_init()
2023-07-18 18:18 ` Bartosz Golaszewski
@ 2023-07-18 18:34 ` Andy Shevchenko
2023-07-18 18:39 ` Asmaa Mnebhi
0 siblings, 1 reply; 5+ messages in thread
From: Andy Shevchenko @ 2023-07-18 18:34 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Asmaa Mnebhi, linus.walleij, bgolaszewski, linux-gpio,
linux-kernel, davthompson
On Tue, Jul 18, 2023 at 9:18 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> On Mon, Jul 10, 2023 at 11:49 PM Asmaa Mnebhi <asmaa@nvidia.com> wrote:
...
> Applied, thanks!
This has a bug.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH v5] gpio: mmio: handle "ngpios" properly in bgpio_init()
2023-07-18 18:34 ` Andy Shevchenko
@ 2023-07-18 18:39 ` Asmaa Mnebhi
2023-07-18 18:58 ` Bartosz Golaszewski
0 siblings, 1 reply; 5+ messages in thread
From: Asmaa Mnebhi @ 2023-07-18 18:39 UTC (permalink / raw)
To: Andy Shevchenko, Bartosz Golaszewski
Cc: linus.walleij, bgolaszewski, linux-gpio, linux-kernel, David Thompson
>
> > Applied, thanks!
>
> This has a bug.
>
My apologies for this inconvenience. This is not the right patch to be applied. It was rejected by Andy. I just forwarded to you the patch to apply.
Its only one patch an dis named:
[PATCH v2 1/1] gpio: mmio: handle "ngpios" properly in bgpio_init()
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v5] gpio: mmio: handle "ngpios" properly in bgpio_init()
2023-07-18 18:39 ` Asmaa Mnebhi
@ 2023-07-18 18:58 ` Bartosz Golaszewski
0 siblings, 0 replies; 5+ messages in thread
From: Bartosz Golaszewski @ 2023-07-18 18:58 UTC (permalink / raw)
To: Asmaa Mnebhi
Cc: Andy Shevchenko, linus.walleij, bgolaszewski, linux-gpio,
linux-kernel, David Thompson
On Tue, Jul 18, 2023 at 8:39 PM Asmaa Mnebhi <asmaa@nvidia.com> wrote:
>
> >
> > > Applied, thanks!
> >
> > This has a bug.
> >
> My apologies for this inconvenience. This is not the right patch to be applied. It was rejected by Andy. I just forwarded to you the patch to apply.
> Its only one patch an dis named:
> [PATCH v2 1/1] gpio: mmio: handle "ngpios" properly in bgpio_init()
Yeah, I figured and backed it out.
Bart
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-07-18 18:58 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-07-10 21:49 [PATCH v5] gpio: mmio: handle "ngpios" properly in bgpio_init() Asmaa Mnebhi
2023-07-18 18:18 ` Bartosz Golaszewski
2023-07-18 18:34 ` Andy Shevchenko
2023-07-18 18:39 ` Asmaa Mnebhi
2023-07-18 18:58 ` Bartosz Golaszewski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®