From: Yan Zhao <yan.y.zhao@intel.com>
To: kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: pbonzini@redhat.com, seanjc@google.com, chao.gao@intel.com,
kai.huang@intel.com, robert.hoo.linux@gmail.com,
yuan.yao@linux.intel.com, Yan Zhao <yan.y.zhao@intel.com>
Subject: [PATCH v4 07/12] KVM: VMX: drop IPAT in memtype when CD=1 for KVM_X86_QUIRK_CD_NW_CLEARED
Date: Fri, 14 Jul 2023 14:53:26 +0800 [thread overview]
Message-ID: <20230714065326.20557-1-yan.y.zhao@intel.com> (raw)
In-Reply-To: <20230714064656.20147-1-yan.y.zhao@intel.com>
For KVM_X86_QUIRK_CD_NW_CLEARED is on, remove the IPAT (ignore PAT) bit in
EPT memory types when cache is disabled and non-coherent DMA are present.
To correctly emulate CR0.CD=1, UC + IPAT are required as memtype in EPT.
However, as with commit
fb279950ba02 ("KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED"), WB + IPAT are
now returned to workaround a BIOS issue that guest MTRRs are enabled too
late. Without this workaround, a super slow guest boot-up is expected
during the pre-guest-MTRR-enabled period due to UC as the effective memory
type for all guest memory.
Absent emulating CR0.CD=1 with UC, it makes no sense to set IPAT when KVM
is honoring the guest memtype.
Removing the IPAT bit in this patch allows effective memory type to honor
PAT values as well, as WB is the weakest memtype. It means if a guest
explicitly claims UC as the memtype in PAT, the effective memory is UC
instead of previous WB. If, for some unknown reason, a guest meets a slow
boot-up issue with the removal of IPAT, it's desired to fix the blamed PAT
in the guest.
Besides, this patch is also a preparation patch for later fine-grained gfn
zap when guest MTRRs are honored, because it allows zapping only non-WB
ranges when CR0.CD toggles.
BTW, returning guest MTRR type as if CR0.CD=0 is also not preferred because
it still has to hardcode the MTRR type to WB during the
pre-guest-MTRR-enabled period to workaround the slow guest boot-up issue
(guest MTRR type when guest MTRRs are disabled is UC).
In addition, it will make the quirk unnecessarily complexer .
The change of removing IPAT has been verified with normal boot-up time
on old OVMF of commit c9e5618f84b0cb54a9ac2d7604f7b7e7859b45a7 as well,
dated back to Apr 14 2015.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
---
arch/x86/kvm/vmx/vmx.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 0ecf4be2c6af..c1e93678cea4 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7548,8 +7548,6 @@ static int vmx_vm_init(struct kvm *kvm)
static u8 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
{
- u8 cache;
-
/* We wanted to honor guest CD/MTRR/PAT, but doing so could result in
* memory aliases with conflicting memory types and sometimes MCEs.
* We have to be careful as to what are honored and when.
@@ -7576,11 +7574,10 @@ static u8 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
if (kvm_read_cr0_bits(vcpu, X86_CR0_CD)) {
if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED))
- cache = MTRR_TYPE_WRBACK;
+ return MTRR_TYPE_WRBACK << VMX_EPT_MT_EPTE_SHIFT;
else
- cache = MTRR_TYPE_UNCACHABLE;
-
- return (cache << VMX_EPT_MT_EPTE_SHIFT) | VMX_EPT_IPAT_BIT;
+ return (MTRR_TYPE_UNCACHABLE << VMX_EPT_MT_EPTE_SHIFT) |
+ VMX_EPT_IPAT_BIT;
}
return kvm_mtrr_get_guest_memory_type(vcpu, gfn) << VMX_EPT_MT_EPTE_SHIFT;
--
2.17.1
next prev parent reply other threads:[~2023-07-14 7:20 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-14 6:46 [PATCH v4 00/12] KVM: x86/mmu: refine memtype related mmu zap Yan Zhao
2023-07-14 6:50 ` [PATCH v4 01/12] KVM: x86/mmu: helpers to return if KVM honors guest MTRRs Yan Zhao
2023-10-07 7:00 ` Like Xu
2023-10-09 19:52 ` Sean Christopherson
2023-10-09 21:27 ` Sean Christopherson
2023-10-09 21:36 ` Sean Christopherson
2023-10-10 3:46 ` Yan Zhao
2023-10-11 0:08 ` Sean Christopherson
2023-10-11 1:47 ` Yan Zhao
2023-07-14 6:50 ` [PATCH v4 02/12] KVM: x86/mmu: Use KVM honors guest MTRRs helper in kvm_tdp_page_fault() Yan Zhao
2023-07-14 6:51 ` [PATCH v4 03/12] KVM: x86/mmu: Use KVM honors guest MTRRs helper when CR0.CD toggles Yan Zhao
2023-07-14 6:51 ` [PATCH v4 04/12] KVM: x86/mmu: Use KVM honors guest MTRRs helper when update mtrr Yan Zhao
2023-07-14 6:52 ` [PATCH v4 05/12] KVM: x86/mmu: zap KVM TDP when noncoherent DMA assignment starts/stops Yan Zhao
2023-07-14 6:52 ` [PATCH v4 06/12] KVM: x86/mmu: move TDP zaps from guest MTRRs update to CR0.CD toggling Yan Zhao
2023-07-14 6:53 ` Yan Zhao [this message]
2023-08-25 21:43 ` [PATCH v4 07/12] KVM: VMX: drop IPAT in memtype when CD=1 for KVM_X86_QUIRK_CD_NW_CLEARED Sean Christopherson
2023-09-04 7:41 ` Yan Zhao
2023-07-14 6:53 ` [PATCH v4 08/12] KVM: x86: centralize code to get CD=1 memtype when guest MTRRs are honored Yan Zhao
2023-08-25 21:46 ` Sean Christopherson
2023-09-04 7:46 ` Yan Zhao
2023-07-14 6:54 ` [PATCH v4 09/12] KVM: x86/mmu: serialize vCPUs to zap gfn " Yan Zhao
2023-08-25 22:47 ` Sean Christopherson
2023-09-04 8:24 ` Yan Zhao
2023-07-14 6:55 ` [PATCH v4 10/12] KVM: x86/mmu: fine-grained gfn zap " Yan Zhao
2023-08-25 23:13 ` Sean Christopherson
2023-09-04 8:37 ` Yan Zhao
2023-07-14 6:56 ` [PATCH v4 11/12] KVM: x86/mmu: split a single gfn zap range " Yan Zhao
2023-08-25 23:15 ` Sean Christopherson
2023-09-04 8:39 ` Yan Zhao
2023-07-14 6:56 ` [PATCH v4 12/12] KVM: x86/mmu: convert kvm_zap_gfn_range() to use shared mmu_lock in TDP MMU Yan Zhao
2023-08-25 21:34 ` Sean Christopherson
2023-09-04 7:31 ` Yan Zhao
2023-09-05 22:31 ` Sean Christopherson
2023-09-06 0:50 ` Yan Zhao
2023-08-25 23:17 ` [PATCH v4 00/12] KVM: x86/mmu: refine memtype related mmu zap Sean Christopherson
2023-09-04 8:48 ` Yan Zhao
2023-10-05 1:29 ` Sean Christopherson
2023-10-05 2:19 ` Huang, Kai
2023-10-05 2:28 ` Sean Christopherson
2023-10-06 0:50 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230714065326.20557-1-yan.y.zhao@intel.com \
--to=yan.y.zhao@intel.com \
--cc=chao.gao@intel.com \
--cc=kai.huang@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=robert.hoo.linux@gmail.com \
--cc=seanjc@google.com \
--cc=yuan.yao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®