[PATCH v5 1/2] drm/ssd130x: Inline the ssd130x_buf_{alloc,free}() function helpers

[PATCH v5 1/2] drm/ssd130x: Inline the ssd130x_buf_{alloc,free}() function helpers

[Javier Martinez Canillas]

There is only a single caller for both helper functions and these don't do
much other than allocate and free two buffers, so let's just inline them.

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
---

(no changes since v1)

 drivers/gpu/drm/solomon/ssd130x.c | 55 +++++++++++--------------------
 1 file changed, 20 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index b4c376962629..51472a184ef9 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -146,38 +146,6 @@ static inline struct ssd130x_device *drm_to_ssd130x(struct drm_device *drm)
 	return container_of(drm, struct ssd130x_device, drm);
 }
 
-static int ssd130x_buf_alloc(struct ssd130x_device *ssd130x)
-{
-	unsigned int page_height = ssd130x->device_info->page_height;
-	unsigned int pages = DIV_ROUND_UP(ssd130x->height, page_height);
-	const struct drm_format_info *fi;
-	unsigned int pitch;
-
-	fi = drm_format_info(DRM_FORMAT_R1);
-	if (!fi)
-		return -EINVAL;
-
-	pitch = drm_format_info_min_pitch(fi, 0, ssd130x->width);
-
-	ssd130x->buffer = kcalloc(pitch, ssd130x->height, GFP_KERNEL);
-	if (!ssd130x->buffer)
-		return -ENOMEM;
-
-	ssd130x->data_array = kcalloc(ssd130x->width, pages, GFP_KERNEL);
-	if (!ssd130x->data_array) {
-		kfree(ssd130x->buffer);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-static void ssd130x_buf_free(struct ssd130x_device *ssd130x)
-{
-	kfree(ssd130x->data_array);
-	kfree(ssd130x->buffer);
-}
-
 /*
  * Helper to write data (SSD130X_DATA) to the device.
  */
@@ -709,6 +677,10 @@ static void ssd130x_encoder_helper_atomic_enable(struct drm_encoder *encoder,
 {
 	struct drm_device *drm = encoder->dev;
 	struct ssd130x_device *ssd130x = drm_to_ssd130x(drm);
+	unsigned int page_height = ssd130x->device_info->page_height;
+	unsigned int pages = DIV_ROUND_UP(ssd130x->height, page_height);
+	const struct drm_format_info *fi;
+	unsigned int pitch;
 	int ret;
 
 	ret = ssd130x_power_on(ssd130x);
@@ -719,9 +691,21 @@ static void ssd130x_encoder_helper_atomic_enable(struct drm_encoder *encoder,
 	if (ret)
 		goto power_off;
 
-	ret = ssd130x_buf_alloc(ssd130x);
-	if (ret)
+	fi = drm_format_info(DRM_FORMAT_R1);
+	if (!fi)
+		goto power_off;
+
+	pitch = drm_format_info_min_pitch(fi, 0, ssd130x->width);
+
+	ssd130x->buffer = kcalloc(pitch, ssd130x->height, GFP_KERNEL);
+	if (!ssd130x->buffer)
+		goto power_off;
+
+	ssd130x->data_array = kcalloc(ssd130x->width, pages, GFP_KERNEL);
+	if (!ssd130x->data_array) {
+		kfree(ssd130x->buffer);
 		goto power_off;
+	}
 
 	ssd130x_write_cmd(ssd130x, 1, SSD130X_DISPLAY_ON);
 
@@ -744,7 +728,8 @@ static void ssd130x_encoder_helper_atomic_disable(struct drm_encoder *encoder,
 
 	ssd130x_write_cmd(ssd130x, 1, SSD130X_DISPLAY_OFF);
 
-	ssd130x_buf_free(ssd130x);
+	kfree(ssd130x->data_array);
+	kfree(ssd130x->buffer);
 
 	ssd130x_power_off(ssd130x);
 }
-- 
2.41.0

[PATCH v5 2/2] drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback

[Javier Martinez Canillas]

Drivers are not allowed to fail after drm_atomic_helper_swap_state() has
been called and the new atomic state is stored into the current sw state.

Since the struct ssd130x_device .data_array is allocated in the encoder's
.atomic_enable callback, the operation can fail and this is after the new
state has been stored. So it can break an atomic mode settings assumption.

Fix this by having custom helpers to allocate, duplicate and destroy the
plane state, that will take care of allocating and freeing these buffers.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
---

Changes in v5:
- Add collected tags from Maxime and Geert.
- Update commit message to not mention the kernel oops (Geert Uytterhoeven).
- Drop Reported-by and Fixes tags (Geert Uytterhoeven).
- Update comment about buffer and data_array fields (Geert Uytterhoeven).
- Remove superfluous NULL check in ssd130x_fb_blit_rect() (Geert Uytterhoeven).
- Reset .buffer to NULL if .data_array allocation fails (Geert Uytterhoeven).
- Inline buffer alloc/free helper functions (Geert Uytterhoeven).

Changes in v4:
- Move buffers allocation/free to plane .reset/.destroy helpers (Maxime Ripard).

Changes in v3:
- Move the buffers allocation to the plane helper funcs .begin_fb_access
  and the free to .end_fb_access callbacks.
- Always allocate intermediate buffer because is use in ssd130x_clear_screen().
- Don't allocate the buffers as device managed resources.

Changes in v2:
- Move the buffers allocation to .fb_create instead of preventing atomic
  updates for disable planes.
- Don't allocate the intermediate buffer when using the native R1 format.
- Allocate buffers as device managed resources.

 drivers/gpu/drm/solomon/ssd130x.c | 158 +++++++++++++++++++++++-------
 drivers/gpu/drm/solomon/ssd130x.h |   3 -
 2 files changed, 121 insertions(+), 40 deletions(-)

diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index 51472a184ef9..d2f8dd6a6347 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -141,6 +141,19 @@ const struct ssd130x_deviceinfo ssd130x_variants[] = {
 };
 EXPORT_SYMBOL_NS_GPL(ssd130x_variants, DRM_SSD130X);
 
+struct ssd130x_plane_state {
+	struct drm_plane_state base;
+	/* Intermediate buffer to convert pixels from XRGB8888 to HW format */
+	u8 *buffer;
+	/* Buffer to store pixels in HW format and written to the panel */
+	u8 *data_array;
+};
+
+static inline struct ssd130x_plane_state *to_ssd130x_plane_state(struct drm_plane_state *state)
+{
+	return container_of(state, struct ssd130x_plane_state, base);
+}
+
 static inline struct ssd130x_device *drm_to_ssd130x(struct drm_device *drm)
 {
 	return container_of(drm, struct ssd130x_device, drm);
@@ -434,12 +447,14 @@ static int ssd130x_init(struct ssd130x_device *ssd130x)
 				 SSD130X_SET_ADDRESS_MODE_HORIZONTAL);
 }
 
-static int ssd130x_update_rect(struct ssd130x_device *ssd130x, struct drm_rect *rect)
+static int ssd130x_update_rect(struct ssd130x_device *ssd130x,
+			       struct ssd130x_plane_state *ssd130x_state,
+			       struct drm_rect *rect)
 {
 	unsigned int x = rect->x1;
 	unsigned int y = rect->y1;
-	u8 *buf = ssd130x->buffer;
-	u8 *data_array = ssd130x->data_array;
+	u8 *buf = ssd130x_state->buffer;
+	u8 *data_array = ssd130x_state->data_array;
 	unsigned int width = drm_rect_width(rect);
 	unsigned int height = drm_rect_height(rect);
 	unsigned int line_length = DIV_ROUND_UP(width, 8);
@@ -535,7 +550,8 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x, struct drm_rect *
 	return ret;
 }
 
-static void ssd130x_clear_screen(struct ssd130x_device *ssd130x)
+static void ssd130x_clear_screen(struct ssd130x_device *ssd130x,
+				 struct ssd130x_plane_state *ssd130x_state)
 {
 	struct drm_rect fullscreen = {
 		.x1 = 0,
@@ -544,21 +560,21 @@ static void ssd130x_clear_screen(struct ssd130x_device *ssd130x)
 		.y2 = ssd130x->height,
 	};
 
-	ssd130x_update_rect(ssd130x, &fullscreen);
+	ssd130x_update_rect(ssd130x, ssd130x_state, &fullscreen);
 }
 
-static int ssd130x_fb_blit_rect(struct drm_framebuffer *fb, const struct iosys_map *vmap,
+static int ssd130x_fb_blit_rect(struct drm_plane_state *state,
+				const struct iosys_map *vmap,
 				struct drm_rect *rect)
 {
+	struct drm_framebuffer *fb = state->fb;
 	struct ssd130x_device *ssd130x = drm_to_ssd130x(fb->dev);
 	unsigned int page_height = ssd130x->device_info->page_height;
+	struct ssd130x_plane_state *ssd130x_state = to_ssd130x_plane_state(state);
+	u8 *buf = ssd130x_state->buffer;
 	struct iosys_map dst;
 	unsigned int dst_pitch;
 	int ret = 0;
-	u8 *buf = ssd130x->buffer;
-
-	if (!buf)
-		return 0;
 
 	/* Align y to display page boundaries */
 	rect->y1 = round_down(rect->y1, page_height);
@@ -575,11 +591,49 @@ static int ssd130x_fb_blit_rect(struct drm_framebuffer *fb, const struct iosys_m
 
 	drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
 
-	ssd130x_update_rect(ssd130x, rect);
+	ssd130x_update_rect(ssd130x, ssd130x_state, rect);
 
 	return ret;
 }
 
+static int ssd130x_primary_plane_helper_atomic_check(struct drm_plane *plane,
+						     struct drm_atomic_state *state)
+{
+	struct drm_device *drm = plane->dev;
+	struct ssd130x_device *ssd130x = drm_to_ssd130x(drm);
+	struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
+	struct ssd130x_plane_state *ssd130x_state = to_ssd130x_plane_state(plane_state);
+	unsigned int page_height = ssd130x->device_info->page_height;
+	unsigned int pages = DIV_ROUND_UP(ssd130x->height, page_height);
+	const struct drm_format_info *fi;
+	unsigned int pitch;
+	int ret;
+
+	ret = drm_plane_helper_atomic_check(plane, state);
+	if (ret)
+		return ret;
+
+	fi = drm_format_info(DRM_FORMAT_R1);
+	if (!fi)
+		return -EINVAL;
+
+	pitch = drm_format_info_min_pitch(fi, 0, ssd130x->width);
+
+	ssd130x_state->buffer = kcalloc(pitch, ssd130x->height, GFP_KERNEL);
+	if (!ssd130x_state->buffer)
+		return -ENOMEM;
+
+	ssd130x_state->data_array = kcalloc(ssd130x->width, pages, GFP_KERNEL);
+	if (!ssd130x_state->data_array) {
+		kfree(ssd130x_state->buffer);
+		/* Set to prevent a double free in .atomic_destroy_state() */
+		ssd130x_state->buffer = NULL;
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
 static void ssd130x_primary_plane_helper_atomic_update(struct drm_plane *plane,
 						       struct drm_atomic_state *state)
 {
@@ -602,7 +656,7 @@ static void ssd130x_primary_plane_helper_atomic_update(struct drm_plane *plane,
 		if (!drm_rect_intersect(&dst_clip, &damage))
 			continue;
 
-		ssd130x_fb_blit_rect(plane_state->fb, &shadow_plane_state->data[0], &dst_clip);
+		ssd130x_fb_blit_rect(plane_state, &shadow_plane_state->data[0], &dst_clip);
 	}
 
 	drm_dev_exit(idx);
@@ -613,19 +667,69 @@ static void ssd130x_primary_plane_helper_atomic_disable(struct drm_plane *plane,
 {
 	struct drm_device *drm = plane->dev;
 	struct ssd130x_device *ssd130x = drm_to_ssd130x(drm);
+	struct ssd130x_plane_state *ssd130x_state = to_ssd130x_plane_state(plane->state);
 	int idx;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	ssd130x_clear_screen(ssd130x);
+	ssd130x_clear_screen(ssd130x, ssd130x_state);
 
 	drm_dev_exit(idx);
 }
 
+/* Called during init to allocate the plane's atomic state. */
+static void ssd130x_primary_plane_reset(struct drm_plane *plane)
+{
+	struct ssd130x_plane_state *ssd130x_state;
+
+	WARN_ON(plane->state);
+
+	ssd130x_state = kzalloc(sizeof(*ssd130x_state), GFP_KERNEL);
+	if (!ssd130x_state)
+		return;
+
+	__drm_atomic_helper_plane_reset(plane, &ssd130x_state->base);
+}
+
+static struct drm_plane_state *ssd130x_primary_plane_duplicate_state(struct drm_plane *plane)
+{
+	struct ssd130x_plane_state *old_ssd130x_state;
+	struct ssd130x_plane_state *ssd130x_state;
+
+	if (WARN_ON(!plane->state))
+		return NULL;
+
+	old_ssd130x_state = to_ssd130x_plane_state(plane->state);
+	ssd130x_state = kmemdup(old_ssd130x_state, sizeof(*ssd130x_state), GFP_KERNEL);
+	if (!ssd130x_state)
+		return NULL;
+
+	/* The buffers are not duplicated and are allocated in .atomic_check */
+	ssd130x_state->buffer = NULL;
+	ssd130x_state->data_array = NULL;
+
+	__drm_atomic_helper_plane_duplicate_state(plane, &ssd130x_state->base);
+
+	return &ssd130x_state->base;
+}
+
+static void ssd130x_primary_plane_destroy_state(struct drm_plane *plane,
+						struct drm_plane_state *state)
+{
+	struct ssd130x_plane_state *ssd130x_state = to_ssd130x_plane_state(state);
+
+	kfree(ssd130x_state->data_array);
+	kfree(ssd130x_state->buffer);
+
+	__drm_atomic_helper_plane_destroy_state(&ssd130x_state->base);
+
+	kfree(ssd130x_state);
+}
+
 static const struct drm_plane_helper_funcs ssd130x_primary_plane_helper_funcs = {
 	DRM_GEM_SHADOW_PLANE_HELPER_FUNCS,
-	.atomic_check = drm_plane_helper_atomic_check,
+	.atomic_check = ssd130x_primary_plane_helper_atomic_check,
 	.atomic_update = ssd130x_primary_plane_helper_atomic_update,
 	.atomic_disable = ssd130x_primary_plane_helper_atomic_disable,
 };
@@ -633,6 +737,9 @@ static const struct drm_plane_helper_funcs ssd130x_primary_plane_helper_funcs =
 static const struct drm_plane_funcs ssd130x_primary_plane_funcs = {
 	.update_plane = drm_atomic_helper_update_plane,
 	.disable_plane = drm_atomic_helper_disable_plane,
+	.reset = ssd130x_primary_plane_reset,
+	.atomic_duplicate_state = ssd130x_primary_plane_duplicate_state,
+	.atomic_destroy_state = ssd130x_primary_plane_destroy_state,
 	.destroy = drm_plane_cleanup,
 	DRM_GEM_SHADOW_PLANE_FUNCS,
 };
@@ -677,10 +784,6 @@ static void ssd130x_encoder_helper_atomic_enable(struct drm_encoder *encoder,
 {
 	struct drm_device *drm = encoder->dev;
 	struct ssd130x_device *ssd130x = drm_to_ssd130x(drm);
-	unsigned int page_height = ssd130x->device_info->page_height;
-	unsigned int pages = DIV_ROUND_UP(ssd130x->height, page_height);
-	const struct drm_format_info *fi;
-	unsigned int pitch;
 	int ret;
 
 	ret = ssd130x_power_on(ssd130x);
@@ -691,22 +794,6 @@ static void ssd130x_encoder_helper_atomic_enable(struct drm_encoder *encoder,
 	if (ret)
 		goto power_off;
 
-	fi = drm_format_info(DRM_FORMAT_R1);
-	if (!fi)
-		goto power_off;
-
-	pitch = drm_format_info_min_pitch(fi, 0, ssd130x->width);
-
-	ssd130x->buffer = kcalloc(pitch, ssd130x->height, GFP_KERNEL);
-	if (!ssd130x->buffer)
-		goto power_off;
-
-	ssd130x->data_array = kcalloc(ssd130x->width, pages, GFP_KERNEL);
-	if (!ssd130x->data_array) {
-		kfree(ssd130x->buffer);
-		goto power_off;
-	}
-
 	ssd130x_write_cmd(ssd130x, 1, SSD130X_DISPLAY_ON);
 
 	backlight_enable(ssd130x->bl_dev);
@@ -728,9 +815,6 @@ static void ssd130x_encoder_helper_atomic_disable(struct drm_encoder *encoder,
 
 	ssd130x_write_cmd(ssd130x, 1, SSD130X_DISPLAY_OFF);
 
-	kfree(ssd130x->data_array);
-	kfree(ssd130x->buffer);
-
 	ssd130x_power_off(ssd130x);
 }
 
diff --git a/drivers/gpu/drm/solomon/ssd130x.h b/drivers/gpu/drm/solomon/ssd130x.h
index 161588b1cc4d..87968b3e7fb8 100644
--- a/drivers/gpu/drm/solomon/ssd130x.h
+++ b/drivers/gpu/drm/solomon/ssd130x.h
@@ -89,9 +89,6 @@ struct ssd130x_device {
 	u8 col_end;
 	u8 page_start;
 	u8 page_end;
-
-	u8 *buffer;
-	u8 *data_array;
 };
 
 extern const struct ssd130x_deviceinfo ssd130x_variants[];
-- 
2.41.0

Re: [PATCH v5 2/2] drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback

[Geert Uytterhoeven]

Hi Javier,

On Wed, Jul 26, 2023 at 12:55 PM Javier Martinez Canillas
<javierm@redhat.com> wrote:
> Drivers are not allowed to fail after drm_atomic_helper_swap_state() has
> been called and the new atomic state is stored into the current sw state.
>
> Since the struct ssd130x_device .data_array is allocated in the encoder's
> .atomic_enable callback, the operation can fail and this is after the new
> state has been stored. So it can break an atomic mode settings assumption.
>
> Fix this by having custom helpers to allocate, duplicate and destroy the
> plane state, that will take care of allocating and freeing these buffers.
>
> Suggested-by: Maxime Ripard <mripard@kernel.org>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> Acked-by: Maxime Ripard <mripard@kernel.org>
> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
> ---
>
> Changes in v5:
> - Add collected tags from Maxime and Geert.
> - Update commit message to not mention the kernel oops (Geert Uytterhoeven).
> - Drop Reported-by and Fixes tags (Geert Uytterhoeven).
> - Update comment about buffer and data_array fields (Geert Uytterhoeven).
> - Remove superfluous NULL check in ssd130x_fb_blit_rect() (Geert Uytterhoeven).
> - Reset .buffer to NULL if .data_array allocation fails (Geert Uytterhoeven).
> - Inline buffer alloc/free helper functions (Geert Uytterhoeven).

Thanks for the update!

> --- a/drivers/gpu/drm/solomon/ssd130x.c
> +++ b/drivers/gpu/drm/solomon/ssd130x.c

> @@ -535,7 +550,8 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x, struct drm_rect *
>         return ret;
>  }
>
> -static void ssd130x_clear_screen(struct ssd130x_device *ssd130x)
> +static void ssd130x_clear_screen(struct ssd130x_device *ssd130x,
> +                                struct ssd130x_plane_state *ssd130x_state)
>  {
>         struct drm_rect fullscreen = {
>                 .x1 = 0,
> @@ -544,21 +560,21 @@ static void ssd130x_clear_screen(struct ssd130x_device *ssd130x)
>                 .y2 = ssd130x->height,
>         };
>
> -       ssd130x_update_rect(ssd130x, &fullscreen);
> +       ssd130x_update_rect(ssd130x, ssd130x_state, &fullscreen);

I've just realized another issue: since 49d7d581ceaf4cf8 ("drm/ssd130x:
Don't allocate buffers on each plane update"). this no longer
clears the screens, but just updates the hardware with the data in
ssd130x_device.buffer, i.e. with the last image shown.
So this should at least clear all of ssd130x_device.buffer before
calling ssd130x_update_rect().

As it's a bit pointless to transpose a black image, a better fix would
be to just clear ssd130x.data_array, and call the low-level hardware
functions like ssd130x_update_rect() does.

>  }

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v5 2/2] drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback

[Javier Martinez Canillas]

Geert Uytterhoeven <geert@linux-m68k.org> writes:

> Hi Javier,
>
> On Wed, Jul 26, 2023 at 12:55 PM Javier Martinez Canillas
> <javierm@redhat.com> wrote:
>> Drivers are not allowed to fail after drm_atomic_helper_swap_state() has
>> been called and the new atomic state is stored into the current sw state.
>>
>> Since the struct ssd130x_device .data_array is allocated in the encoder's
>> .atomic_enable callback, the operation can fail and this is after the new
>> state has been stored. So it can break an atomic mode settings assumption.
>>
>> Fix this by having custom helpers to allocate, duplicate and destroy the
>> plane state, that will take care of allocating and freeing these buffers.
>>
>> Suggested-by: Maxime Ripard <mripard@kernel.org>
>> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
>> Acked-by: Maxime Ripard <mripard@kernel.org>
>> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
>> ---
>>
>> Changes in v5:
>> - Add collected tags from Maxime and Geert.
>> - Update commit message to not mention the kernel oops (Geert Uytterhoeven).
>> - Drop Reported-by and Fixes tags (Geert Uytterhoeven).
>> - Update comment about buffer and data_array fields (Geert Uytterhoeven).
>> - Remove superfluous NULL check in ssd130x_fb_blit_rect() (Geert Uytterhoeven).
>> - Reset .buffer to NULL if .data_array allocation fails (Geert Uytterhoeven).
>> - Inline buffer alloc/free helper functions (Geert Uytterhoeven).
>
> Thanks for the update!
>

You are welcome, and thanks for the review!

>> --- a/drivers/gpu/drm/solomon/ssd130x.c
>> +++ b/drivers/gpu/drm/solomon/ssd130x.c
>
>> @@ -535,7 +550,8 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x, struct drm_rect *
>>         return ret;
>>  }
>>
>> -static void ssd130x_clear_screen(struct ssd130x_device *ssd130x)
>> +static void ssd130x_clear_screen(struct ssd130x_device *ssd130x,
>> +                                struct ssd130x_plane_state *ssd130x_state)
>>  {
>>         struct drm_rect fullscreen = {
>>                 .x1 = 0,
>> @@ -544,21 +560,21 @@ static void ssd130x_clear_screen(struct ssd130x_device *ssd130x)
>>                 .y2 = ssd130x->height,
>>         };
>>
>> -       ssd130x_update_rect(ssd130x, &fullscreen);
>> +       ssd130x_update_rect(ssd130x, ssd130x_state, &fullscreen);
>
> I've just realized another issue: since 49d7d581ceaf4cf8 ("drm/ssd130x:
> Don't allocate buffers on each plane update"). this no longer
> clears the screens, but just updates the hardware with the data in
> ssd130x_device.buffer, i.e. with the last image shown.
> So this should at least clear all of ssd130x_device.buffer before
> calling ssd130x_update_rect().
>

Oh, you are right. I missed that.

> As it's a bit pointless to transpose a black image, a better fix would
> be to just clear ssd130x.data_array, and call the low-level hardware
> functions like ssd130x_update_rect() does.
>

Yeah, this is a left over when we used to allocate a buffer here and I
agree with you that calling ssd130x_update_rect() is a pointless.

We can fix this as a separate follow-up patch though if you agree.

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat

Re: [PATCH v5 2/2] drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback

[Javier Martinez Canillas]

Javier Martinez Canillas <javierm@redhat.com> writes:

> Drivers are not allowed to fail after drm_atomic_helper_swap_state() has
> been called and the new atomic state is stored into the current sw state.
>
> Since the struct ssd130x_device .data_array is allocated in the encoder's
> .atomic_enable callback, the operation can fail and this is after the new
> state has been stored. So it can break an atomic mode settings assumption.
>
> Fix this by having custom helpers to allocate, duplicate and destroy the
> plane state, that will take care of allocating and freeing these buffers.
>
> Suggested-by: Maxime Ripard <mripard@kernel.org>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> Acked-by: Maxime Ripard <mripard@kernel.org>
> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

Pushed to drm-misc (drm-misc-next). Thanks!

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat

Re: [PATCH v5 1/2] drm/ssd130x: Inline the ssd130x_buf_{alloc,free}() function helpers

[Geert Uytterhoeven]

On Wed, Jul 26, 2023 at 12:55 PM Javier Martinez Canillas
<javierm@redhat.com> wrote:
> There is only a single caller for both helper functions and these don't do
> much other than allocate and free two buffers, so let's just inline them.
>
> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v5 1/2] drm/ssd130x: Inline the ssd130x_buf_{alloc,free}() function helpers

[Javier Martinez Canillas]

Geert Uytterhoeven <geert@linux-m68k.org> writes:

> On Wed, Jul 26, 2023 at 12:55 PM Javier Martinez Canillas
> <javierm@redhat.com> wrote:
>> There is only a single caller for both helper functions and these don't do
>> much other than allocate and free two buffers, so let's just inline them.
>>
>> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
>> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
>
> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
>

Pushed to drm-misc (drm-misc-next). Thanks!

> Gr{oetje,eeting}s,
>
>                         Geert

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat