[PATCH 2/2] nvme-auth: set explanation code for failure2 msgs

[Mark O'Donovan <shiftee@posteo.net>]

These error cases were not setting an auth-failure-reason-code-explanation.
This means an AUTH_Failure2 message will be sent with an explanation value
of 0 which is a reserved value.

Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
---
 drivers/nvme/host/auth.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/auth.c b/drivers/nvme/host/auth.c
index e1a98647c3a2..094f37e11921 100644
--- a/drivers/nvme/host/auth.c
+++ b/drivers/nvme/host/auth.c
@@ -760,6 +760,7 @@ static void nvme_queue_auth_work(struct work_struct *work)
 	ret = nvme_auth_dhchap_setup_host_response(ctrl, chap);
 	mutex_unlock(&ctrl->dhchap_auth_mutex);
 	if (ret) {
+		chap->status = NVME_AUTH_DHCHAP_FAILURE_FAILED;
 		chap->error = ret;
 		goto fail2;
 	}
@@ -776,6 +777,7 @@ static void nvme_queue_auth_work(struct work_struct *work)
 	tl = ret;
 	ret = nvme_auth_submit(ctrl, chap->qid, chap->buf, tl, true);
 	if (ret) {
+		chap->status = NVME_AUTH_DHCHAP_FAILURE_FAILED;
 		chap->error = ret;
 		goto fail2;
 	}
@@ -811,6 +813,7 @@ static void nvme_queue_auth_work(struct work_struct *work)
 		ret = nvme_auth_dhchap_setup_ctrl_response(ctrl, chap);
 		if (ret) {
 			mutex_unlock(&ctrl->dhchap_auth_mutex);
+			chap->status = NVME_AUTH_DHCHAP_FAILURE_FAILED;
 			chap->error = ret;
 			goto fail2;
 		}
@@ -830,8 +833,10 @@ static void nvme_queue_auth_work(struct work_struct *work)
 			__func__, chap->qid);
 		tl = nvme_auth_set_dhchap_success2_data(ctrl, chap);
 		ret = nvme_auth_submit(ctrl, chap->qid, chap->buf, tl, true);
-		if (ret)
+		if (ret) {
+			chap->status = NVME_AUTH_DHCHAP_FAILURE_FAILED;
 			chap->error = ret;
+		}
 	}
 	if (!ret) {
 		chap->error = 0;
-- 
2.39.2