[PATCH v8 0/5] Enable Display for J784S4 and AM69-SK platform

[Jayesh Choudhary <j-choudhary@ti.com>]

This series adds support for:
- DisplayPort for J784S4-EVM
- Displayport and HDMI for AM69-SK platform

Changelog v7->v8:
- rebase on tag next-20230731
- add AM69 display support
- fix commit heading for patch [2/5]

Changelog v6->v7:
- change compatible for scm_conf to 'simple-bus'
- drop main_cpsw node due to driver dependency on [2]

Changelog v5->v6:
- Change header file according to [1].
- Add idle-state property in serdes_ln_ctrl node.
- Fix dtbs_check warning due to clock-frequency property in serdes_refclk
  node by disabling the node in main.dtsi and enabling it in board file
  when the clock-frequency node is actually added.

Changelog v4->v5:
- rebased the patches on linux-next tip.

Changelog v3->v4:
- add reg property to serdes_ln_ctrl and fix the node name again to
  get rid of dtbs_check error.
- reorder reg, reg-names and ranges property for main_cpsw1.
- correct the order for clocks in serdes_wiz nodes to fix dtbs_check
  warnings.
- fix indentation in reg, reg-names and clock property for dss node.
- add comments for the reg type in dss registers.

Changelog v3->v2:
- fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes
  (Checked all the changes of the series with W=12 option during build)
- added clock-frequency for serdes_refclk along with other EVM changes
  This refclk is being used by all the instances of serdes_wiz which
  are disabled by default. So configuring refclk when the serdes nodes
  are used for the first time is okay.

Changelog v1->v2:
- Moved J784S4 EVM changes together to the last patch
  (Suggested by Andrew)

v7 patch link:
<https://lore.kernel.org/all/20230728050859.7370-1-j-choudhary@ti.com/>

[1]: <https://lore.kernel.org/all/20230721125732.122421-1-j-choudhary@ti.com/>
[2]: <https://lore.kernel.org/all/20230605154153.24025-1-afd@ti.com/>

Dasnavis Sabiya (1):
  arm64: dts: ti: k3-am69-sk: Add DP and HDMI support

Rahul T R (2):
  arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
  arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0

Siddharth Vadapalli (2):
  arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane
    mux
  arm64: dts: ti: k3-j784s4-main: Add WIZ and SERDES PHY nodes

 arch/arm64/boot/dts/ti/k3-am69-sk.dts      | 237 +++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts   | 117 +++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 285 +++++++++++++++++++++
 3 files changed, 639 insertions(+)

-- 
2.25.1