From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, Tom Lendacky <thomas.lendacky@amd.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Arjan van de Ven <arjan@linux.intel.com>,
Huang Rui <ray.huang@amd.com>, Juergen Gross <jgross@suse.com>,
Dimitri Sivanich <dimitri.sivanich@hpe.com>,
Michael Kelley <mikelley@microsoft.com>,
Wei Liu <wei.liu@kernel.org>
Subject: [patch V3 32/40] x86/cpu: Use common topology code for AMD
Date: Wed, 2 Aug 2023 12:21:47 +0200 (CEST) [thread overview]
Message-ID: <20230802101934.529871761@linutronix.de> (raw)
In-Reply-To: <20230802101635.459108805@linutronix.de>
Switch it over to the new topology evaluation mechanism and remove the
random bits and pieces which are sprinkled all over the place.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/processor.h | 2
arch/x86/include/asm/topology.h | 5 +
arch/x86/kernel/cpu/amd.c | 146 ----------------------------------
arch/x86/kernel/cpu/mce/inject.c | 3
arch/x86/kernel/cpu/topology_common.c | 5 -
5 files changed, 10 insertions(+), 151 deletions(-)
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -705,10 +705,8 @@ static inline u32 per_cpu_l2c_id(unsigne
}
#ifdef CONFIG_CPU_SUP_AMD
-extern u32 amd_get_nodes_per_socket(void);
extern u32 amd_get_highest_perf(void);
#else
-static inline u32 amd_get_nodes_per_socket(void) { return 0; }
static inline u32 amd_get_highest_perf(void) { return 0; }
#endif
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -121,6 +121,11 @@ struct x86_topology_system {
extern struct x86_topology_system x86_topo_system;
+static inline unsigned int topology_get_domain_size(enum x86_topology_domains dom)
+{
+ return x86_topo_system.dom_size[dom];
+}
+
extern const struct cpumask *cpu_coregroup_mask(int cpu);
extern const struct cpumask *cpu_clustergroup_mask(int cpu);
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -28,13 +28,6 @@
#include "cpu.h"
/*
- * nodes_per_socket: Stores the number of nodes per socket.
- * Refer to Fam15h Models 00-0fh BKDG - CPUID Fn8000_001E_ECX
- * Node Identifiers[10:8]
- */
-static u32 nodes_per_socket = 1;
-
-/*
* AMD errata checking
*
* Errata are defined as arrays of ints using the AMD_LEGACY_ERRATUM() or
@@ -372,97 +365,6 @@ static int nearby_node(int apicid)
}
#endif
-/*
- * Fix up topo::core_id for pre-F17h systems to be in the
- * [0 .. cores_per_node - 1] range. Not really needed but
- * kept so as not to break existing setups.
- */
-static void legacy_fixup_core_id(struct cpuinfo_x86 *c)
-{
- u32 cus_per_node;
-
- if (c->x86 >= 0x17)
- return;
-
- cus_per_node = c->x86_max_cores / nodes_per_socket;
- c->topo.core_id %= cus_per_node;
-}
-
-/*
- * Fixup core topology information for
- * (1) AMD multi-node processors
- * Assumption: Number of cores in each internal node is the same.
- * (2) AMD processors supporting compute units
- */
-static void amd_get_topology(struct cpuinfo_x86 *c)
-{
- /* get information required for multi-node processors */
- if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
- int err;
- u32 eax, ebx, ecx, edx;
-
- cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
-
- c->topo.die_id = ecx & 0xff;
-
- if (c->x86 == 0x15)
- c->topo.cu_id = ebx & 0xff;
-
- if (c->x86 >= 0x17) {
- c->topo.core_id = ebx & 0xff;
-
- if (smp_num_siblings > 1)
- c->x86_max_cores /= smp_num_siblings;
- }
-
- /*
- * In case leaf B is available, use it to derive
- * topology information.
- */
- err = detect_extended_topology(c);
- if (!err)
- c->x86_coreid_bits = get_count_order(c->x86_max_cores);
-
- cacheinfo_amd_init_llc_id(c, c->topo.die_id);
-
- } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
- u64 value;
-
- rdmsrl(MSR_FAM10H_NODE_ID, value);
- c->topo.die_id = value & 7;
- c->topo.llc_id = c->topo.die_id;
- } else
- return;
-
- if (nodes_per_socket > 1) {
- set_cpu_cap(c, X86_FEATURE_AMD_DCM);
- legacy_fixup_core_id(c);
- }
-}
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distinguish the cores.
- * Assumes number of cores is a power of two.
- */
-static void amd_detect_cmp(struct cpuinfo_x86 *c)
-{
- unsigned bits;
-
- bits = c->x86_coreid_bits;
- /* Low order bits define the core id (index of core in socket) */
- c->topo.core_id = c->topo.initial_apicid & ((1 << bits)-1);
- /* Convert the initial APIC ID into the socket ID */
- c->topo.pkg_id = c->topo.initial_apicid >> bits;
- /* use socket ID also for last level cache */
- c->topo.llc_id = c->topo.die_id = c->topo.pkg_id;
-}
-
-u32 amd_get_nodes_per_socket(void)
-{
- return nodes_per_socket;
-}
-EXPORT_SYMBOL_GPL(amd_get_nodes_per_socket);
-
static void srat_detect_node(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_NUMA
@@ -514,32 +416,6 @@ static void srat_detect_node(struct cpui
#endif
}
-static void early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- unsigned bits, ecx;
-
- /* Multi core CPU? */
- if (c->extended_cpuid_level < 0x80000008)
- return;
-
- ecx = cpuid_ecx(0x80000008);
-
- c->x86_max_cores = (ecx & 0xff) + 1;
-
- /* CPU telling us the core id bits shift? */
- bits = (ecx >> 12) & 0xF;
-
- /* Otherwise recompute */
- if (bits == 0) {
- while ((1 << bits) < c->x86_max_cores)
- bits++;
- }
-
- c->x86_coreid_bits = bits;
-#endif
-}
-
static void bsp_init_amd(struct cpuinfo_x86 *c)
{
if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
@@ -572,18 +448,6 @@ static void bsp_init_amd(struct cpuinfo_
if (cpu_has(c, X86_FEATURE_MWAITX))
use_mwaitx_delay();
- if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
- u32 ecx;
-
- ecx = cpuid_ecx(0x8000001e);
- __max_die_per_package = nodes_per_socket = ((ecx >> 8) & 7) + 1;
- } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) {
- u64 value;
-
- rdmsrl(MSR_FAM10H_NODE_ID, value);
- __max_die_per_package = nodes_per_socket = ((value >> 3) & 7) + 1;
- }
-
if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
!boot_cpu_has(X86_FEATURE_VIRT_SSBD) &&
c->x86 >= 0x15 && c->x86 <= 0x17) {
@@ -665,8 +529,6 @@ static void early_init_amd(struct cpuinf
u64 value;
u32 dummy;
- early_init_amd_mc(c);
-
if (c->x86 >= 0xf)
set_cpu_cap(c, X86_FEATURE_K8);
@@ -754,9 +616,6 @@ static void early_init_amd(struct cpuinf
}
}
}
-
- if (cpu_has(c, X86_FEATURE_TOPOEXT))
- smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
}
static void init_amd_k8(struct cpuinfo_x86 *c)
@@ -1037,9 +896,6 @@ static void init_amd(struct cpuinfo_x86
if (cpu_has(c, X86_FEATURE_FSRM))
set_cpu_cap(c, X86_FEATURE_FSRS);
- /* get apicid instead of initial apic id from cpuid */
- c->topo.apicid = read_apic_id();
-
/* K6s reports MCEs but don't actually have all the MSRs */
if (c->x86 < 6)
clear_cpu_cap(c, X86_FEATURE_MCE);
@@ -1067,8 +923,6 @@ static void init_amd(struct cpuinfo_x86
cpu_detect_cache_sizes(c);
- amd_detect_cmp(c);
- amd_get_topology(c);
srat_detect_node(c);
init_amd_cacheinfo(c);
--- a/arch/x86/kernel/cpu/mce/inject.c
+++ b/arch/x86/kernel/cpu/mce/inject.c
@@ -433,8 +433,7 @@ static u32 get_nbc_for_node(int node_id)
struct cpuinfo_x86 *c = &boot_cpu_data;
u32 cores_per_node;
- cores_per_node = (c->x86_max_cores * smp_num_siblings) / amd_get_nodes_per_socket();
-
+ cores_per_node = (c->x86_max_cores * smp_num_siblings) / topology_amd_nodes_per_pkg();
return cores_per_node * node_id;
}
--- a/arch/x86/kernel/cpu/topology_common.c
+++ b/arch/x86/kernel/cpu/topology_common.c
@@ -72,7 +72,6 @@ bool topo_is_converted(struct cpuinfo_x8
{
/* Temporary until everything is converted over. */
switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_AMD:
case X86_VENDOR_HYGON:
return false;
default:
@@ -133,6 +132,10 @@ static void parse_topology(struct topo_s
tscan->ebx1_nproc_shift = get_count_order(ebx.nproc);
switch (c->x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (IS_ENABLED(CONFIG_CPU_SUP_AMD))
+ cpu_parse_topology_amd(tscan);
+ break;
case X86_VENDOR_CENTAUR:
case X86_VENDOR_ZHAOXIN:
parse_legacy(tscan);
next prev parent reply other threads:[~2023-08-02 10:25 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-02 10:20 [patch V3 00/40] x86/cpu: Rework the topology evaluation Thomas Gleixner
2023-08-02 10:20 ` [patch V3 01/40] cpu/SMT: Make SMT control more robust against enumeration failures Thomas Gleixner
2023-08-04 17:50 ` Borislav Petkov
2023-08-04 20:01 ` Thomas Gleixner
2023-08-02 10:21 ` [patch V3 02/40] x86/apic: Fake primary thread mask for XEN/PV Thomas Gleixner
2023-08-04 18:12 ` Borislav Petkov
2023-08-04 20:02 ` Thomas Gleixner
2023-08-02 10:21 ` [patch V3 03/40] x86/cpu: Encapsulate topology information in cpuinfo_x86 Thomas Gleixner
2023-08-02 10:21 ` [patch V3 04/40] x86/cpu: Move phys_proc_id into topology info Thomas Gleixner
2023-08-02 10:21 ` [patch V3 05/40] x86/cpu: Move cpu_die_id " Thomas Gleixner
2023-08-09 14:32 ` Zhang, Rui
2023-08-09 15:14 ` Thomas Gleixner
2023-08-02 10:21 ` [patch V3 06/40] scsi: lpfc: Use topology_core_id() Thomas Gleixner
2023-08-02 10:21 ` [patch V3 07/40] hwmon: (fam15h_power) " Thomas Gleixner
2023-08-02 10:21 ` [patch V3 08/40] x86/cpu: Move cpu_core_id into topology info Thomas Gleixner
2023-08-02 10:21 ` [patch V3 09/40] x86/cpu: Move cu_id " Thomas Gleixner
2023-08-02 10:21 ` [patch V3 10/40] x86/cpu: Remove pointless evaluation of x86_coreid_bits Thomas Gleixner
2023-08-02 10:21 ` [patch V3 11/40] x86/cpu: Move logical package and die IDs into topology info Thomas Gleixner
2023-08-02 10:21 ` [patch V3 12/40] x86/cpu: Move cpu_l[l2]c_id " Thomas Gleixner
2023-08-02 10:21 ` [patch V3 13/40] x86/apic: Use BAD_APICID consistently Thomas Gleixner
2023-08-02 10:21 ` [patch V3 14/40] x86/apic: Use u32 for APIC IDs in global data Thomas Gleixner
2023-08-02 10:21 ` [patch V3 15/40] x86/apic: Use u32 for check_apicid_used() Thomas Gleixner
2023-08-02 10:21 ` [patch V3 16/40] x86/apic: Use u32 for cpu_present_to_apicid() Thomas Gleixner
2023-08-02 10:21 ` [patch V3 17/40] x86/apic: Use u32 for phys_pkg_id() Thomas Gleixner
2023-08-02 10:21 ` [patch V3 18/40] x86/apic: Use u32 for [gs]et_apic_id() Thomas Gleixner
2023-08-02 10:21 ` [patch V3 19/40] x86/apic: Use u32 for wakeup_secondary_cpu[_64]() Thomas Gleixner
2023-08-10 7:58 ` Qiuxu Zhuo
2023-08-02 10:21 ` [patch V3 20/40] x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids Thomas Gleixner
2023-08-02 10:21 ` [patch V3 21/40] x86/cpu: Provide debug interface Thomas Gleixner
2023-08-02 10:21 ` [patch V3 22/40] x86/cpu: Provide cpuid_read() et al Thomas Gleixner
2023-08-02 10:21 ` [patch V3 23/40] x86/cpu: Provide cpu_init/parse_topology() Thomas Gleixner
2023-08-04 8:14 ` K Prateek Nayak
2023-08-04 8:28 ` Thomas Gleixner
2023-08-04 8:34 ` K Prateek Nayak
2023-08-12 6:41 ` Zhang, Rui
2023-08-12 8:00 ` Zhang, Rui
2023-08-14 6:26 ` Thomas Gleixner
2023-08-14 7:11 ` Zhang, Rui
2023-08-13 13:30 ` Zhang, Rui
2023-08-13 14:36 ` Thomas Gleixner
2023-08-14 6:20 ` Thomas Gleixner
2023-08-14 6:42 ` Zhang, Rui
2023-08-02 10:21 ` [patch V3 24/40] x86/cpu: Add legacy topology parser Thomas Gleixner
2023-08-02 10:21 ` [patch V3 25/40] x86/cpu: Use common topology code for Centaur and Zhaoxin Thomas Gleixner
2023-08-02 10:21 ` [patch V3 26/40] x86/cpu: Move __max_die_per_package to common.c Thomas Gleixner
2023-08-02 10:21 ` [patch V3 27/40] x86/cpu: Provide a sane leaf 0xb/0x1f parser Thomas Gleixner
2023-08-12 8:21 ` Zhang, Rui
2023-08-12 20:04 ` Thomas Gleixner
2023-08-13 15:04 ` Thomas Gleixner
2023-08-14 8:25 ` Zhang, Rui
2023-08-14 12:26 ` Thomas Gleixner
2023-08-14 14:48 ` Brown, Len
2023-08-14 16:13 ` Thomas Gleixner
2023-08-15 19:30 ` Brown, Len
2023-08-17 9:09 ` Thomas Gleixner
2023-08-18 5:01 ` Brown, Len
2023-08-21 10:27 ` Thomas Gleixner
2023-08-30 2:46 ` Brown, Len
2023-08-30 12:39 ` Thomas Gleixner
2023-09-01 3:09 ` Brown, Len
2023-09-01 7:45 ` Thomas Gleixner
2023-08-14 15:28 ` Zhang, Rui
2023-08-14 17:12 ` Thomas Gleixner
2023-08-02 10:21 ` [patch V3 28/40] x86/cpu: Use common topology code for Intel Thomas Gleixner
2023-08-02 10:21 ` [patch V3 29/40] x86/cpu/amd: Provide a separate accessor for Node ID Thomas Gleixner
2023-08-02 10:21 ` [patch V3 30/40] x86/cpu: Provide an AMD/HYGON specific topology parser Thomas Gleixner
2023-08-02 19:28 ` Michael Kelley (LINUX)
2023-08-02 19:46 ` Thomas Gleixner
2023-08-02 19:51 ` [patch V3a " Thomas Gleixner
2023-08-11 12:58 ` Pu Wen
2023-08-11 17:11 ` Thomas Gleixner
2023-08-12 3:58 ` Pu Wen
2023-10-13 9:38 ` [tip: x86/core] x86/cpu/hygon: Fix the CPU topology evaluation for real tip-bot2 for Pu Wen
2023-08-02 10:21 ` [patch V3 31/40] x86/smpboot: Teach it about topo.amd_node_id Thomas Gleixner
2023-08-02 10:21 ` Thomas Gleixner [this message]
2023-08-02 10:21 ` [patch V3 33/40] x86/cpu: Use common topology code for HYGON Thomas Gleixner
2023-08-11 13:00 ` Pu Wen
2023-08-11 17:11 ` Thomas Gleixner
2023-08-02 10:21 ` [patch V3 34/40] x86/mm/numa: Use core domain size on AMD Thomas Gleixner
2023-08-02 10:21 ` [patch V3 35/40] x86/cpu: Make topology_amd_node_id() use the actual node info Thomas Gleixner
2023-08-02 10:21 ` [patch V3 36/40] x86/cpu: Remove topology.c Thomas Gleixner
2023-08-02 10:21 ` [patch V3 37/40] x86/cpu: Remove x86_coreid_bits Thomas Gleixner
2023-08-02 10:21 ` [patch V3 38/40] x86/apic: Remove unused phys_pkg_id() callback Thomas Gleixner
2023-08-02 10:21 ` [patch V3 39/40] x86/xen/smp_pv: Remove cpudata fiddling Thomas Gleixner
2023-08-02 10:22 ` [patch V3 40/40] x86/apic/uv: Remove the private leaf 0xb parser Thomas Gleixner
2023-08-02 11:56 ` [patch V3 00/40] x86/cpu: Rework the topology evaluation Juergen Gross
2023-08-03 0:07 ` Sohil Mehta
2023-08-03 3:44 ` Michael Kelley (LINUX)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230802101934.529871761@linutronix.de \
--to=tglx@linutronix.de \
--cc=andrew.cooper3@citrix.com \
--cc=arjan@linux.intel.com \
--cc=dimitri.sivanich@hpe.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=ray.huang@amd.com \
--cc=thomas.lendacky@amd.com \
--cc=wei.liu@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®