From: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
To: Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
Shuah Khan <shuah@kernel.org>
Cc: cocci@inria.fr, "Mark Brown" <broonie@kernel.org>,
"Nicolas Palix" <nicolas.palix@imag.fr>,
kernelci@lists.linux.dev, "Julia Lawall" <Julia.Lawall@inria.fr>,
"Bjorn Andersson" <andersson@kernel.org>,
kernel@collabora.com, "Guenter Roeck" <groeck@chromium.org>,
"Nícolas F. R. A. Prado" <nfraprado@collabora.com>,
linux-kernel@vger.kernel.org, linux-kselftest@vger.kernel.org
Subject: [RFC PATCH 2/2] kselftest: Add Devicetree unprobed devices test
Date: Thu, 10 Aug 2023 16:23:51 -0400 [thread overview]
Message-ID: <20230810202413.1780286-3-nfraprado@collabora.com> (raw)
In-Reply-To: <20230810202413.1780286-1-nfraprado@collabora.com>
Introduce a new kselftest to detect devices that were declared in the
Devicetree, and are expected to be probed by a driver, but weren't.
The test uses two lists: a list of compatibles that can match a
Devicetree device to a driver, and a list of compatibles that should be
ignored. The first is automatically generated from a script that parses
the kernel source using Coccinelle, and will be run as part of building
this test, therefore Coccinelle is a build-time dependency for this
test. The list of compatibles to ignore is a hand-crafted list to
capture the few exceptions of compatibles that are expected to match a
driver but not be bound to it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/dt/.gitignore | 1 +
tools/testing/selftests/dt/Makefile | 17 ++++++
.../selftests/dt/compatible_ignore_list | 3 +
.../selftests/dt/test_unprobed_devices.sh | 58 +++++++++++++++++++
5 files changed, 80 insertions(+)
create mode 100644 tools/testing/selftests/dt/.gitignore
create mode 100644 tools/testing/selftests/dt/Makefile
create mode 100644 tools/testing/selftests/dt/compatible_ignore_list
create mode 100755 tools/testing/selftests/dt/test_unprobed_devices.sh
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 8dca8acdb671..2fe992ca9294 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -16,6 +16,7 @@ TARGETS += drivers/dma-buf
TARGETS += drivers/s390x/uvdevice
TARGETS += drivers/net/bonding
TARGETS += drivers/net/team
+TARGETS += dt
TARGETS += efivarfs
TARGETS += exec
TARGETS += fchmodat2
diff --git a/tools/testing/selftests/dt/.gitignore b/tools/testing/selftests/dt/.gitignore
new file mode 100644
index 000000000000..f6476c9f2884
--- /dev/null
+++ b/tools/testing/selftests/dt/.gitignore
@@ -0,0 +1 @@
+compatible_list
diff --git a/tools/testing/selftests/dt/Makefile b/tools/testing/selftests/dt/Makefile
new file mode 100644
index 000000000000..fa5f3c12a659
--- /dev/null
+++ b/tools/testing/selftests/dt/Makefile
@@ -0,0 +1,17 @@
+COCCI = $(shell which spatch 2>/dev/null)
+
+ifneq ($(COCCI),)
+TEST_PROGS := test_unprobed_devices.sh
+TEST_GEN_FILES := compatible_list
+TEST_FILES := compatible_ignore_list
+
+include ../lib.mk
+
+$(OUTPUT)/compatible_list:
+ cd $(top_srcdir) && ./scripts/dtc/extract-matchable-dt-compatibles > $(OUTPUT)/compatible_list
+
+else
+
+all:
+
+endif
diff --git a/tools/testing/selftests/dt/compatible_ignore_list b/tools/testing/selftests/dt/compatible_ignore_list
new file mode 100644
index 000000000000..5d7fc6229428
--- /dev/null
+++ b/tools/testing/selftests/dt/compatible_ignore_list
@@ -0,0 +1,3 @@
+fixed-factor-clock
+fixed-clock
+simple-mfd
diff --git a/tools/testing/selftests/dt/test_unprobed_devices.sh b/tools/testing/selftests/dt/test_unprobed_devices.sh
new file mode 100755
index 000000000000..4741bedefd1f
--- /dev/null
+++ b/tools/testing/selftests/dt/test_unprobed_devices.sh
@@ -0,0 +1,58 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2023 Collabora Ltd
+#
+# Based on Frank Rowand's dt_stat script.
+#
+# This script tests for devices that were declared on the Devicetree and are
+# expected to bind to a driver, but didn't.
+#
+# To achieve this, two lists are used:
+# * a list of the compatibles that can be matched by a Devicetree node
+# * a list of compatibles that should be ignored
+#
+PDT=/proc/device-tree/
+COMPAT_LIST=compatible_list
+IGNORE_LIST=compatible_ignore_list
+
+nodes_compatible=$(
+ for node_compat in $(find ${PDT} -name compatible); do
+ node=$(dirname "${node_compat}")
+ # Check if node is available
+ [[ -e "${node}"/status && $(tr -d '\000' < "${node}"/status) != "okay" ]] && continue
+ echo "${node}" | sed -e 's|\/proc\/device-tree||'
+ done | sort
+ )
+
+nodes_dev_bound=$(
+ IFS=$'\n'
+ for uevent in $(find /sys/devices -name uevent); do
+ if [[ -d "$(dirname "${uevent}")"/driver ]]; then
+ grep '^OF_FULLNAME=' "${uevent}" | sed -e 's|OF_FULLNAME=||'
+ fi
+ done
+ )
+
+retval=0
+for node in ${nodes_compatible}; do
+ if ! echo "${nodes_dev_bound}" | grep -E -q "(^| )${node}( |\$)"; then
+ compatibles=$(tr '\000' '\n' < "${PDT}"/"${node}"/compatible)
+
+ for compatible in ${compatibles}; do
+ if grep -x -q "${compatible}" "$IGNORE_LIST"; then
+ echo "DEBUG: Ignoring " "${node}"
+ continue
+ fi
+
+ if grep -x -q "${compatible}" "$COMPAT_LIST"; then
+ echo "BROKEN: " "${node}"
+ retval=1
+ continue 2
+ fi
+ done
+ echo "DEBUG: Skipping " "${node}"
+ fi
+done
+
+exit $retval
--
2.41.0
next prev parent reply other threads:[~2023-08-10 20:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-10 20:23 [RFC PATCH 0/2] Add a test to catch unprobed Devicetree devices Nícolas F. R. A. Prado
2023-08-10 20:23 ` [RFC PATCH 1/2] scripts/dtc: Add script to extract matchable DT compatibles Nícolas F. R. A. Prado
2023-08-10 20:23 ` Nícolas F. R. A. Prado [this message]
2023-08-11 13:54 ` [RFC PATCH 2/2] kselftest: Add Devicetree unprobed devices test Mark Brown
2023-08-11 14:16 ` Nícolas F. R. A. Prado
2023-08-17 12:26 ` Mark Brown
2023-08-17 16:17 ` Nícolas F. R. A. Prado
2023-08-17 17:39 ` Mark Brown
2023-08-10 21:43 ` [RFC PATCH 0/2] Add a test to catch unprobed Devicetree devices Rob Herring
2023-08-10 21:54 ` Rob Herring
2023-08-11 13:17 ` Nícolas F. R. A. Prado
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230810202413.1780286-3-nfraprado@collabora.com \
--to=nfraprado@collabora.com \
--cc=Julia.Lawall@inria.fr \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=cocci@inria.fr \
--cc=frowand.list@gmail.com \
--cc=groeck@chromium.org \
--cc=kernel@collabora.com \
--cc=kernelci@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=nicolas.palix@imag.fr \
--cc=robh+dt@kernel.org \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®