[PATCH v1 1/1] serial: 8250_port: Check IRQ data before use

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

In case the leaf driver wants to use IRQ polling (irq = 0) and
IIR register shows that an interrupt happened in the 8250 hardware
the IRQ data can be NULL. In such a case we need to skip the wake
event as we came to this path from the timer interrupt and quite
likely system is already awake.

Without this fix we have got an Oops:

    serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A
    ...
    BUG: kernel NULL pointer dereference, address: 0000000000000010
    RIP: 0010:serial8250_handle_irq+0x7c/0x240
    Call Trace:
     ? serial8250_handle_irq+0x7c/0x240
     ? __pfx_serial8250_timeout+0x10/0x10

Fixes: 0ba9e3a13c6a ("serial: 8250: Add missing wakeup event reporting")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/tty/serial/8250/8250_port.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index fb891b67968f..141627370aab 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1936,7 +1936,10 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 		skip_rx = true;
 
 	if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) {
-		if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
+		struct irq_data *d;
+
+		d = irq_get_irq_data(port->irq);
+		if (d && irqd_is_wakeup_set(d))
 			pm_wakeup_event(tport->tty->dev, 0);
 		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
-- 
2.40.0.1.gaa8946217a0b