mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Conor Dooley <conor.dooley@microchip.com>
To: Charlie Jenkins <charlie@rivosinc.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>,
	Conor Dooley <conor@kernel.org>,
	Samuel Holland <samuel.holland@sifive.com>,
	David Laight <David.Laight@aculab.com>,
	<linux-riscv@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Subject: Re: [PATCH v4 2/5] riscv: Add checksum library
Date: Thu, 14 Sep 2023 13:25:23 +0100	[thread overview]
Message-ID: <20230914-mural-deskbound-0e37d0767f6f@wendy> (raw)
In-Reply-To: <20230911-optimize_checksum-v4-2-77cc2ad9e9d7@rivosinc.com>

[-- Attachment #1: Type: text/plain, Size: 10953 bytes --]

On Mon, Sep 11, 2023 at 03:57:12PM -0700, Charlie Jenkins wrote:
> Provide a 32 and 64 bit version of do_csum. When compiled for 32-bit
> will load from the buffer in groups of 32 bits, and when compiled for
> 64-bit will load in groups of 64 bits. Benchmarking by proxy compiling
> csum_ipv6_magic (64-bit version) for an x86 chip as well as running
> the riscv generated code in QEMU, discovered that summing in a
> tree-like structure is about 4% faster than doing 64-bit reads.
> 
> Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
> ---
>  arch/riscv/include/asm/checksum.h |  11 ++
>  arch/riscv/lib/Makefile           |   1 +
>  arch/riscv/lib/csum.c             | 210 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 222 insertions(+)
> 
> diff --git a/arch/riscv/include/asm/checksum.h b/arch/riscv/include/asm/checksum.h
> index 0d7fc8275a5e..a09a4053fb87 100644
> --- a/arch/riscv/include/asm/checksum.h
> +++ b/arch/riscv/include/asm/checksum.h
> @@ -16,6 +16,14 @@ typedef unsigned int csum_t;
>  typedef unsigned long csum_t;
>  #endif
>  
> +/* Default version is sufficient for 32 bit */
> +#ifdef CONFIG_64BIT
> +#define _HAVE_ARCH_IPV6_CSUM
> +__sum16 csum_ipv6_magic(const struct in6_addr *saddr,
> +			const struct in6_addr *daddr,
> +			__u32 len, __u8 proto, __wsum sum);
> +#endif
> +
>  /*
>   *	Fold a partial checksum without adding pseudo headers
>   */
> @@ -90,6 +98,9 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
>  
>  #define ip_fast_csum ip_fast_csum
>  
> +extern unsigned int do_csum(const unsigned char *buff, int len);
> +#define do_csum do_csum
> +
>  #include <asm-generic/checksum.h>
>  
>  #endif // __ASM_RISCV_CHECKSUM_H
> diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
> index 26cb2502ecf8..2aa1a4ad361f 100644
> --- a/arch/riscv/lib/Makefile
> +++ b/arch/riscv/lib/Makefile
> @@ -6,6 +6,7 @@ lib-y			+= memmove.o
>  lib-y			+= strcmp.o
>  lib-y			+= strlen.o
>  lib-y			+= strncmp.o
> +lib-y			+= csum.o
>  lib-$(CONFIG_MMU)	+= uaccess.o
>  lib-$(CONFIG_64BIT)	+= tishift.o
>  lib-$(CONFIG_RISCV_ISA_ZICBOZ)	+= clear_page.o
> diff --git a/arch/riscv/lib/csum.c b/arch/riscv/lib/csum.c
> new file mode 100644
> index 000000000000..47d98c51bab2
> --- /dev/null
> +++ b/arch/riscv/lib/csum.c
> @@ -0,0 +1,210 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * IP checksum library
> + *
> + * Influenced by arch/arm64/lib/csum.c
> + * Copyright (C) 2023 Rivos Inc.
> + */
> +#include <linux/bitops.h>
> +#include <linux/compiler.h>
> +#include <linux/kasan-checks.h>
> +#include <linux/kernel.h>
> +
> +#include <net/checksum.h>
> +
> +/* Default version is sufficient for 32 bit */
> +#ifndef CONFIG_32BIT
> +__sum16 csum_ipv6_magic(const struct in6_addr *saddr,
> +			const struct in6_addr *daddr,
> +			__u32 len, __u8 proto, __wsum csum)
> +{
> +	/*
> +	 * Inform the compiler/processor that the operation we are performing is
> +	 * "Commutative and Associative" by summing parts of the checksum in a
> +	 * tree-like structure (Section 2(A) of "Computing the Internet
> +	 * Checksum"). Furthermore, defer the overflow until the end of the
> +	 * computation which is shown to be valid in Section 2(C)(1) of the
> +	 * same handbook.
> +	 */
> +	unsigned long sum, sum1, sum2, sum3, sum4, ulen, uproto;
> +
> +	uproto = htonl(proto);
> +	ulen = htonl(len);
> +
> +	sum   = saddr->s6_addr32[0];
> +	sum  += saddr->s6_addr32[1];
> +	sum1  = saddr->s6_addr32[2];
> +	sum1 += saddr->s6_addr32[3];
> +
> +	sum2  = daddr->s6_addr32[0];
> +	sum2 += daddr->s6_addr32[1];
> +	sum3  = daddr->s6_addr32[2];
> +	sum3 += daddr->s6_addr32[3];
> +
> +	sum4  = csum;
> +	sum4 += ulen;
> +	sum4 += uproto;
> +
> +	sum  += sum1;
> +	sum2 += sum3;
> +
> +	sum += sum2;
> +	sum += sum4;
> +
> +	if (IS_ENABLED(CONFIG_RISCV_ISA_ZBB) &&
> +	    IS_ENABLED(CONFIG_RISCV_ALTERNATIVE)) {
> +		csum_t fold_temp;
> +
> +		/*
> +		 * Zbb is likely available when the kernel is compiled with Zbb
> +		 * support, so nop when Zbb is available and jump when Zbb is
> +		 * not available.
> +		 */
> +		asm_volatile_goto(ALTERNATIVE("j %l[no_zbb]", "nop", 0,
> +					      RISCV_ISA_EXT_ZBB, 1)
> +				  :
> +				  :
> +				  :
> +				  : no_zbb);
> +		asm(".option push					\n\
> +		.option arch,+zbb					\n\
> +			rori	%[fold_temp], %[sum], 32		\n\
> +			add	%[sum], %[fold_temp], %[sum]		\n\
> +			srli	%[sum], %[sum], 32			\n\
> +			not	%[fold_temp], %[sum]			\n\
> +			roriw	%[sum], %[sum], 16			\n\
> +			subw	%[sum], %[fold_temp], %[sum]		\n\
> +		.option pop"
> +		: [sum] "+r" (sum), [fold_temp] "=&r" (fold_temp));
> +		return (__force __sum16)(sum >> 16);
> +	}
> +no_zbb:
> +	sum += (sum >> 32) | (sum << 32);
> +	sum >>= 32;
> +	return csum_fold((__force __wsum)sum);
> +}
> +EXPORT_SYMBOL(csum_ipv6_magic);
> +#endif // !CONFIG_32BIT
> +
> +#ifdef CONFIG_32BIT
> +#define OFFSET_MASK 3
> +#elif CONFIG_64BIT
> +#define OFFSET_MASK 7
> +#endif
> +
> +/*
> + * Perform a checksum on an arbitrary memory address.
> + * Algorithm accounts for buff being misaligned.
> + * If buff is not aligned, will over-read bytes but not use the bytes that it
> + * shouldn't. The same thing will occur on the tail-end of the read.
> + */
> +unsigned int __no_sanitize_address do_csum(const unsigned char *buff, int len)
> +{
> +	unsigned int offset, shift;
> +	csum_t csum, data;
> +	const csum_t *ptr;
> +
> +	if (unlikely(len <= 0))
> +		return 0;
> +	/*
> +	 * To align the address, grab the whole first byte in buff.
> +	 * Since it is inside of a same byte, it will never cross pages or cache
> +	 * lines.
> +	 * Directly call KASAN with the alignment we will be using.
> +	 */
> +	offset = (csum_t)buff & OFFSET_MASK;
> +	kasan_check_read(buff, len);
> +	ptr = (const csum_t *)(buff - offset);
> +	len = len + offset - sizeof(csum_t);
> +
> +	/*
> +	 * Clear the most signifant bits that were over-read if buff was not
> +	 * aligned.
> +	 */
> +	shift = offset * 8;
> +	data = *ptr;
> +#ifdef __LITTLE_ENDIAN
> +	data = (data >> shift) << shift;
> +#else
> +	data = (data << shift) >> shift;
> +#endif
> +	/*
> +	 * Do 32-bit reads on RV32 and 64-bit reads otherwise. This should be
> +	 * faster than doing 32-bit reads on architectures that support larger
> +	 * reads.
> +	 */
> +	while (len > 0) {
> +		csum += data;

arch/riscv/lib/csum.c:137:3: warning: variable 'csum' is uninitialized when used here [-Wuninitialized]
                csum += data;
                ^~~~
arch/riscv/lib/csum.c:104:13: note: initialize the variable 'csum' to silence this warning
        csum_t csum, data;
                   ^
                    = 0
> +		csum += csum < data;
> +		len -= sizeof(csum_t);
> +		ptr += 1;
> +		data = *ptr;
> +	}
> +
> +	/*
> +	 * Perform alignment (and over-read) bytes on the tail if any bytes
> +	 * leftover.
> +	 */
> +	shift = len * -8;
> +#ifdef __LITTLE_ENDIAN
> +	data = (data << shift) >> shift;
> +#else
> +	data = (data >> shift) << shift;
> +#endif
> +	csum += data;
> +	csum += csum < data;
> +
> +	if (!riscv_has_extension_likely(RISCV_ISA_EXT_ZBB))
> +		goto no_zbb;

I think this is missing a change for IS_ENABLED(CONFIG_RISCV_ISA_ZBB)?
arch/riscv/lib/csum.c:180:1: warning: unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax' [-Winline-asm]
                .option arch,+zbb                               \n\
^
<inline asm>:2:11: note: instantiated into assembly here
                .option arch,+zbb                               
                        ^
arch/riscv/lib/csum.c:181:1: error: instruction requires the following: 'Zbb' (Basic Bit-Manipulation) or 'Zbkb' (Bitmanip instructions for Cryptography)
                        rori    %[fold_temp], %[csum], 32       \n\
^
<inline asm>:3:4: note: instantiated into assembly here
                        rori    a2, a0, 32      
                        ^
arch/riscv/lib/csum.c:184:1: error: instruction requires the following: 'Zbb' (Basic Bit-Manipulation) or 'Zbkb' (Bitmanip instructions for Cryptography)
                        roriw   %[fold_temp], %[csum], 16       \n\
^
<inline asm>:6:4: note: instantiated into assembly here
                        roriw   a2, a0, 16      
                        ^
arch/riscv/lib/csum.c:188:1: error: instruction requires the following: 'Zbb' (Basic Bit-Manipulation) or 'Zbkb' (Bitmanip instructions for Cryptography)
                        rev8    %[csum], %[csum]                \n\
^
<inline asm>:10:4: note: instantiated into assembly here
                        rev8    a0, a0          
                        ^
2 warnings and 3 errors generated.

clang before 17 doesn't support `.option arch`, so the guard is required
around any code using it. You've got the guard on the other `.option
arch` user above, so that one seems to have escaped notice ;)

Going forward, it'd be good to test this stuff with non-latest clang to
make sure you appropriately consider the !Zbb cases.


> +
> +	unsigned int fold_temp;
> +
> +	if (IS_ENABLED(CONFIG_32BIT)) {
> +		asm_volatile_goto(".option push			\n\
> +		.option arch,+zbb				\n\
> +			rori	%[fold_temp], %[csum], 16	\n\
> +			andi	%[offset], %[offset], 1		\n\
> +			add	%[csum], %[fold_temp], %[csum]	\n\
> +			beq	%[offset], zero, %l[end]	\n\
> +			rev8	%[csum], %[csum]		\n\
> +			zext.h	%[csum], %[csum]		\n\
> +		.option pop"
> +			: [csum] "+r" (csum), [fold_temp] "=&r" (fold_temp)
> +			: [offset] "r" (offset)
> +			:
> +			: end);
> +
> +		return csum;
> +	} else {
> +		asm_volatile_goto(".option push			\n\
> +		.option arch,+zbb				\n\
> +			rori	%[fold_temp], %[csum], 32	\n\
> +			add	%[csum], %[fold_temp], %[csum]	\n\
> +			srli	%[csum], %[csum], 32		\n\
> +			roriw	%[fold_temp], %[csum], 16	\n\
> +			addw	%[csum], %[fold_temp], %[csum]	\n\
> +			andi	%[offset], %[offset], 1		\n\
> +			beq	%[offset], zero, %l[end]	\n\
> +			rev8	%[csum], %[csum]		\n\
> +			srli	%[csum], %[csum], 32		\n\
> +			zext.h	%[csum], %[csum]		\n\
> +		.option pop"
> +			: [csum] "+r" (csum), [fold_temp] "=&r" (fold_temp)
> +			: [offset] "r" (offset)
> +			:
> +			: end);
> +
> +		return csum;
> +	}
> +end:
> +		return csum >> 16;
> +no_zbb:
> +#ifndef CONFIG_32BIT

These can also be moved to IS_ENABLED() FYI, since there's no 32-bit
stuff here that'd break the build for 64-bit. Ditto elsewhere where
you've got similar stuff.

Cheers,
Conor.

> +		csum += (csum >> 32) | (csum << 32);
> +		csum >>= 32;
> +#endif
> +	csum = (unsigned int)csum + (((unsigned int)csum >> 16) | ((unsigned int)csum << 16));
> +	if (offset & 1)
> +		return (unsigned short)swab32(csum);
> +	return csum >> 16;
> +}
> 
> -- 
> 2.42.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  parent reply	other threads:[~2023-09-14 12:25 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-11 22:57 [PATCH v4 0/5] riscv: Add fine-tuned checksum functions Charlie Jenkins
2023-09-11 22:57 ` [PATCH v4 1/5] riscv: Checksum header Charlie Jenkins
2023-09-12 10:24   ` Emil Renner Berthing
2023-09-13  2:38     ` Charlie Jenkins
2023-09-13  9:19       ` Emil Renner Berthing
2023-09-11 22:57 ` [PATCH v4 2/5] riscv: Add checksum library Charlie Jenkins
2023-09-12  8:45   ` David Laight
2023-09-13  3:09     ` Charlie Jenkins
2023-09-13  8:47       ` David Laight
2023-09-13 23:18         ` Charlie Jenkins
2023-09-14  0:41           ` Charlie Jenkins
2023-09-14 12:25   ` Conor Dooley [this message]
2023-09-14 17:58     ` Charlie Jenkins
2023-09-14 18:02       ` Conor Dooley
2023-09-14 23:30         ` Charlie Jenkins
2023-09-11 22:57 ` [PATCH v4 3/5] riscv: Vector checksum header Charlie Jenkins
2023-09-11 22:57 ` [PATCH v4 4/5] riscv: Vector checksum library Charlie Jenkins
2023-09-14 12:46   ` Conor Dooley
2023-09-14 16:14     ` Charlie Jenkins
2023-09-14 16:29       ` Conor Dooley
2023-09-14 17:29         ` Charlie Jenkins
2023-09-14 17:36           ` Conor Dooley
2023-09-14 20:59             ` Charlie Jenkins
2023-09-11 22:57 ` [PATCH v4 5/5] riscv: Test checksum functions Charlie Jenkins

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230914-mural-deskbound-0e37d0767f6f@wendy \
    --to=conor.dooley@microchip.com \
    --cc=David.Laight@aculab.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=charlie@rivosinc.com \
    --cc=conor@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=samuel.holland@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®