From: Anshuman Khandual <anshuman.khandual@arm.com>
To: linux-arm-kernel@lists.infradead.org, suzuki.poulose@arm.com
Cc: Anshuman Khandual <anshuman.khandual@arm.com>,
James Clark <james.clark@arm.com>,
Mike Leach <mike.leach@linaro.org>,
coresight@lists.linaro.org, linux-kernel@vger.kernel.org
Subject: [RFC RESEND 6/7] coresight: stm: Move ACPI support from AMBA driver to platform driver
Date: Thu, 21 Sep 2023 09:50:39 +0530 [thread overview]
Message-ID: <20230921042040.1334641-7-anshuman.khandual@arm.com> (raw)
In-Reply-To: <20230921042040.1334641-1-anshuman.khandual@arm.com>
Add support for the stm devices in the platform driver, which can then be
used on ACPI based platforms. This change would now allow runtime power
management for ACPI based systems. The driver would try to enable the APB
clock if available.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
---
drivers/acpi/arm64/amba.c | 1 -
drivers/hwtracing/coresight/coresight-stm.c | 80 ++++++++++++++++++---
2 files changed, 71 insertions(+), 10 deletions(-)
diff --git a/drivers/acpi/arm64/amba.c b/drivers/acpi/arm64/amba.c
index 6980502b7868..ebc866518057 100644
--- a/drivers/acpi/arm64/amba.c
+++ b/drivers/acpi/arm64/amba.c
@@ -22,7 +22,6 @@
static const struct acpi_device_id amba_id_list[] = {
{"ARMH0061", 0}, /* PL061 GPIO Device */
{"ARMH0330", 0}, /* ARM DMA Controller DMA-330 */
- {"ARMHC502", 0}, /* ARM CoreSight STM */
{"ARMHC503", 0}, /* ARM CoreSight Debug */
{"", 0},
};
diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c
index a1c27c901ad1..7311b6d3039b 100644
--- a/drivers/hwtracing/coresight/coresight-stm.c
+++ b/drivers/hwtracing/coresight/coresight-stm.c
@@ -29,6 +29,8 @@
#include <linux/perf_event.h>
#include <linux/pm_runtime.h>
#include <linux/stm.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
#include "coresight-priv.h"
#include "coresight-trace-id.h"
@@ -132,6 +134,7 @@ DEFINE_CORESIGHT_DEVLIST(stm_devs, "stm");
struct stm_drvdata {
void __iomem *base;
struct clk *atclk;
+ struct clk *pclk;
struct coresight_device *csdev;
spinlock_t spinlock;
struct channel_space chs;
@@ -804,14 +807,12 @@ static void stm_init_generic_data(struct stm_drvdata *drvdata,
drvdata->stm.set_options = stm_generic_set_options;
}
-static int stm_probe(struct amba_device *adev, const struct amba_id *id)
+static int __stm_probe(struct device *dev, struct resource *res, void *dev_caps)
{
int ret, trace_id;
void __iomem *base;
- struct device *dev = &adev->dev;
struct coresight_platform_data *pdata = NULL;
struct stm_drvdata *drvdata;
- struct resource *res = &adev->res;
struct resource ch_res;
struct coresight_desc desc = { 0 };
@@ -823,12 +824,16 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id)
if (!drvdata)
return -ENOMEM;
- drvdata->atclk = devm_clk_get(&adev->dev, "atclk"); /* optional */
+ drvdata->atclk = devm_clk_get(dev, "atclk"); /* optional */
if (!IS_ERR(drvdata->atclk)) {
ret = clk_prepare_enable(drvdata->atclk);
if (ret)
return ret;
}
+
+ drvdata->pclk = coresight_get_enable_apb_pclk(dev);
+ if (IS_ERR(drvdata->pclk))
+ return -ENODEV;
dev_set_drvdata(dev, drvdata);
base = devm_ioremap_resource(dev, res);
@@ -876,7 +881,7 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id)
ret = PTR_ERR(pdata);
goto stm_unregister;
}
- adev->dev.platform_data = pdata;
+ dev->platform_data = pdata;
desc.type = CORESIGHT_DEV_TYPE_SOURCE;
desc.subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE;
@@ -897,10 +902,10 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id)
}
drvdata->traceid = (u8)trace_id;
- pm_runtime_put(&adev->dev);
+ pm_runtime_put(dev);
dev_info(&drvdata->csdev->dev, "%s initialized\n",
- (char *)coresight_get_uci_data(id));
+ (char *)dev_caps);
return 0;
cs_unregister:
@@ -911,9 +916,14 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static void stm_remove(struct amba_device *adev)
+static int stm_probe(struct amba_device *adev, const struct amba_id *id)
+{
+ return __stm_probe(&adev->dev, &adev->res, coresight_get_uci_data(id));
+}
+
+static void __stm_remove(struct device *dev)
{
- struct stm_drvdata *drvdata = dev_get_drvdata(&adev->dev);
+ struct stm_drvdata *drvdata = dev_get_drvdata(dev);
coresight_trace_id_put_system_id(drvdata->traceid);
coresight_unregister(drvdata->csdev);
@@ -921,6 +931,11 @@ static void stm_remove(struct amba_device *adev)
stm_unregister_device(&drvdata->stm);
}
+static void stm_remove(struct amba_device *adev)
+{
+ __stm_remove(&adev->dev);
+}
+
#ifdef CONFIG_PM
static int stm_runtime_suspend(struct device *dev)
{
@@ -929,6 +944,8 @@ static int stm_runtime_suspend(struct device *dev)
if (drvdata && !IS_ERR(drvdata->atclk))
clk_disable_unprepare(drvdata->atclk);
+ if (drvdata && !IS_ERR(drvdata->pclk))
+ clk_disable_unprepare(drvdata->pclk);
return 0;
}
@@ -939,6 +956,8 @@ static int stm_runtime_resume(struct device *dev)
if (drvdata && !IS_ERR(drvdata->atclk))
clk_prepare_enable(drvdata->atclk);
+ if (drvdata && !IS_ERR(drvdata->pclk))
+ clk_prepare_enable(drvdata->pclk);
return 0;
}
#endif
@@ -969,6 +988,49 @@ static struct amba_driver stm_driver = {
module_amba_driver(stm_driver);
+static int stm_platform_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int ret = 0;
+
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ ret = __stm_probe(&pdev->dev, res, NULL);
+ if (ret) {
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ }
+ return ret;
+}
+
+static int stm_platform_remove(struct platform_device *pdev)
+{
+ __stm_remove(&pdev->dev);
+ return 0;
+}
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id stm_acpi_ids[] = {
+ {"ARMHC502", 0}, /* ARM CoreSight STM */
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, stm_acpi_ids);
+#endif
+
+static struct platform_driver stm_platform_driver = {
+ .probe = stm_platform_probe,
+ .remove = stm_platform_remove,
+ .driver = {
+ .name = "coresight-stm-platform",
+ .acpi_match_table = ACPI_PTR(stm_acpi_ids),
+ .suppress_bind_attrs = true,
+ .pm = &stm_dev_pm_ops,
+ },
+};
+module_platform_driver(stm_platform_driver);
+
MODULE_AUTHOR("Pratik Patel <pratikp@codeaurora.org>");
MODULE_DESCRIPTION("Arm CoreSight System Trace Macrocell driver");
MODULE_LICENSE("GPL v2");
--
2.25.1
next prev parent reply other threads:[~2023-09-21 19:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-21 4:20 [RFC RESEND 0/7] coresight: Move remaining AMBA ACPI devices into " Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 1/7] coresight: replicator: Move ACPI support from AMBA driver to " Anshuman Khandual
2023-09-21 11:10 ` Suzuki K Poulose
2023-09-22 4:10 ` Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 2/7] coresight: funnel: " Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 3/7] coresight: catu: " Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 4/7] coresight: tpiu: " Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 5/7] coresight: tmc: " Anshuman Khandual
2023-09-21 4:20 ` Anshuman Khandual [this message]
2023-09-21 4:20 ` [RFC RESEND 7/7] coresight: debug: " Anshuman Khandual
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230921042040.1334641-7-anshuman.khandual@arm.com \
--to=anshuman.khandual@arm.com \
--cc=coresight@lists.linaro.org \
--cc=james.clark@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mike.leach@linaro.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®