From: Anshuman Khandual <anshuman.khandual@arm.com>
To: linux-arm-kernel@lists.infradead.org, suzuki.poulose@arm.com
Cc: Anshuman Khandual <anshuman.khandual@arm.com>,
James Clark <james.clark@arm.com>,
Mike Leach <mike.leach@linaro.org>,
coresight@lists.linaro.org, linux-kernel@vger.kernel.org
Subject: [RFC RESEND 7/7] coresight: debug: Move ACPI support from AMBA driver to platform driver
Date: Thu, 21 Sep 2023 09:50:40 +0530 [thread overview]
Message-ID: <20230921042040.1334641-8-anshuman.khandual@arm.com> (raw)
In-Reply-To: <20230921042040.1334641-1-anshuman.khandual@arm.com>
Add support for the cpu debug devices in a new platform driver, which can
then be used on ACPI based platforms. This change would now allow runtime
power management for ACPI based systems. The driver would try to enable
the APB clock if available.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
---
drivers/acpi/arm64/amba.c | 1 -
.../hwtracing/coresight/coresight-cpu-debug.c | 130 ++++++++++++++++--
2 files changed, 117 insertions(+), 14 deletions(-)
diff --git a/drivers/acpi/arm64/amba.c b/drivers/acpi/arm64/amba.c
index ebc866518057..b591c7a650aa 100644
--- a/drivers/acpi/arm64/amba.c
+++ b/drivers/acpi/arm64/amba.c
@@ -22,7 +22,6 @@
static const struct acpi_device_id amba_id_list[] = {
{"ARMH0061", 0}, /* PL061 GPIO Device */
{"ARMH0330", 0}, /* ARM DMA Controller DMA-330 */
- {"ARMHC503", 0}, /* ARM CoreSight Debug */
{"", 0},
};
diff --git a/drivers/hwtracing/coresight/coresight-cpu-debug.c b/drivers/hwtracing/coresight/coresight-cpu-debug.c
index 1874df7c6a73..77a42a7d5d7c 100644
--- a/drivers/hwtracing/coresight/coresight-cpu-debug.c
+++ b/drivers/hwtracing/coresight/coresight-cpu-debug.c
@@ -23,6 +23,8 @@
#include <linux/smp.h>
#include <linux/types.h>
#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
#include "coresight-priv.h"
@@ -84,6 +86,7 @@
#define DEBUG_WAIT_TIMEOUT 32000
struct debug_drvdata {
+ struct clk *pclk;
void __iomem *base;
struct device *dev;
int cpu;
@@ -557,18 +560,12 @@ static void debug_func_exit(void)
debugfs_remove_recursive(debug_debugfs_dir);
}
-static int debug_probe(struct amba_device *adev, const struct amba_id *id)
+static int __debug_probe(struct device *dev, struct resource *res)
{
+ struct debug_drvdata *drvdata = dev_get_drvdata(dev);
void __iomem *base;
- struct device *dev = &adev->dev;
- struct debug_drvdata *drvdata;
- struct resource *res = &adev->res;
int ret;
- drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
- if (!drvdata)
- return -ENOMEM;
-
drvdata->cpu = coresight_get_cpu(dev);
if (drvdata->cpu < 0)
return drvdata->cpu;
@@ -579,8 +576,7 @@ static int debug_probe(struct amba_device *adev, const struct amba_id *id)
return -EBUSY;
}
- drvdata->dev = &adev->dev;
- amba_set_drvdata(adev, drvdata);
+ drvdata->dev = dev;
/* Validity for the resource is already checked by the AMBA core */
base = devm_ioremap_resource(dev, res);
@@ -629,10 +625,21 @@ static int debug_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static void debug_remove(struct amba_device *adev)
+static int debug_probe(struct amba_device *adev, const struct amba_id *id)
{
- struct device *dev = &adev->dev;
- struct debug_drvdata *drvdata = amba_get_drvdata(adev);
+ struct debug_drvdata *drvdata;
+
+ drvdata = devm_kzalloc(&adev->dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ amba_set_drvdata(adev, drvdata);
+ return __debug_probe(&adev->dev, &adev->res);
+}
+
+static void __debug_remove(struct device *dev)
+{
+ struct debug_drvdata *drvdata = dev_get_drvdata(dev);
per_cpu(debug_drvdata, drvdata->cpu) = NULL;
@@ -646,6 +653,11 @@ static void debug_remove(struct amba_device *adev)
debug_func_exit();
}
+static void debug_remove(struct amba_device *adev)
+{
+ __debug_remove(&adev->dev);
+}
+
static const struct amba_cs_uci_id uci_id_debug[] = {
{
/* CPU Debug UCI data */
@@ -679,6 +691,98 @@ static struct amba_driver debug_driver = {
module_amba_driver(debug_driver);
+static int debug_platform_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct debug_drvdata *drvdata;
+ int ret = 0;
+
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ drvdata->pclk = coresight_get_enable_apb_pclk(&pdev->dev);
+ if (IS_ERR(drvdata->pclk))
+ return -ENODEV;
+
+ if (res) {
+ drvdata->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(drvdata->base)) {
+ clk_put(drvdata->pclk);
+ return PTR_ERR(drvdata->base);
+ }
+ }
+
+ dev_set_drvdata(&pdev->dev, drvdata);
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ ret = __debug_probe(&pdev->dev, res);
+ if (ret) {
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ }
+ return ret;
+}
+
+static int debug_platform_remove(struct platform_device *pdev)
+{
+ struct debug_drvdata *drvdata = dev_get_drvdata(&pdev->dev);
+
+ if (drvdata)
+ __debug_remove(&pdev->dev);
+
+ pm_runtime_disable(&pdev->dev);
+ if (drvdata && !IS_ERR_OR_NULL(drvdata->pclk))
+ clk_put(drvdata->pclk);
+ return 0;
+}
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id debug_platform_ids[] = {
+ {"ARMHC503", 0}, /* ARM CoreSight Debug */
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, debug_platform_ids);
+#endif
+
+#ifdef CONFIG_PM
+static int debug_runtime_suspend(struct device *dev)
+{
+ struct debug_drvdata *drvdata = dev_get_drvdata(dev);
+
+ if (drvdata->pclk && !IS_ERR(drvdata->pclk))
+ clk_disable_unprepare(drvdata->pclk);
+ return 0;
+}
+
+static int debug_runtime_resume(struct device *dev)
+{
+ struct debug_drvdata *drvdata = dev_get_drvdata(dev);
+
+ if (drvdata->pclk && !IS_ERR(drvdata->pclk))
+ clk_prepare_enable(drvdata->pclk);
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops debug_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(debug_runtime_suspend, debug_runtime_resume, NULL)
+};
+
+static struct platform_driver debug_platform_driver = {
+ .probe = debug_platform_probe,
+ .remove = debug_platform_remove,
+ .driver = {
+ .name = "coresight-debug-platform",
+ .acpi_match_table = ACPI_PTR(debug_platform_ids),
+ .suppress_bind_attrs = true,
+ .pm = &debug_dev_pm_ops,
+ },
+};
+module_platform_driver(debug_platform_driver);
+
MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>");
MODULE_DESCRIPTION("ARM Coresight CPU Debug Driver");
MODULE_LICENSE("GPL");
--
2.25.1
prev parent reply other threads:[~2023-09-21 20:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-21 4:20 [RFC RESEND 0/7] coresight: Move remaining AMBA ACPI devices into " Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 1/7] coresight: replicator: Move ACPI support from AMBA driver to " Anshuman Khandual
2023-09-21 11:10 ` Suzuki K Poulose
2023-09-22 4:10 ` Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 2/7] coresight: funnel: " Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 3/7] coresight: catu: " Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 4/7] coresight: tpiu: " Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 5/7] coresight: tmc: " Anshuman Khandual
2023-09-21 4:20 ` [RFC RESEND 6/7] coresight: stm: " Anshuman Khandual
2023-09-21 4:20 ` Anshuman Khandual [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230921042040.1334641-8-anshuman.khandual@arm.com \
--to=anshuman.khandual@arm.com \
--cc=coresight@lists.linaro.org \
--cc=james.clark@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mike.leach@linaro.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®