* [PATCH v2 1/2] dt-bindings: usb: add device for Genesys Logic hub gl3510
2023-10-02 12:29 [PATCH v2 0/2] usb: misc: onboard_usb_hub: add gl3510 support Jerome Brunet
@ 2023-10-02 12:29 ` Jerome Brunet
2023-10-02 12:29 ` [PATCH v2 2/2] usb: misc: onboard_usb_hub: add Genesys Logic gl3510 hub support Jerome Brunet
1 sibling, 0 replies; 3+ messages in thread
From: Jerome Brunet @ 2023-10-02 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman, Krzysztof Kozlowski, Rob Herring, Conor Dooley
Cc: Jerome Brunet, devicetree, linux-kernel, linux-usb, Krzysztof Kozlowski
Add gl3510 USB 3 root hub device id
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
Documentation/devicetree/bindings/usb/genesys,gl850g.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
index d0927f6768a4..ee08b9c3721f 100644
--- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Genesys Logic GL850G USB 2.0 hub controller
+title: Genesys Logic USB hub controller
maintainers:
- Icenowy Zheng <uwu@icenowy.me>
@@ -18,6 +18,7 @@ properties:
- usb5e3,608
- usb5e3,610
- usb5e3,620
+ - usb5e3,626
reg: true
--
2.40.1
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH v2 2/2] usb: misc: onboard_usb_hub: add Genesys Logic gl3510 hub support
2023-10-02 12:29 [PATCH v2 0/2] usb: misc: onboard_usb_hub: add gl3510 support Jerome Brunet
2023-10-02 12:29 ` [PATCH v2 1/2] dt-bindings: usb: add device for Genesys Logic hub gl3510 Jerome Brunet
@ 2023-10-02 12:29 ` Jerome Brunet
1 sibling, 0 replies; 3+ messages in thread
From: Jerome Brunet @ 2023-10-02 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman, Krzysztof Kozlowski, Rob Herring, Conor Dooley
Cc: Jerome Brunet, devicetree, linux-kernel, linux-usb
Add support for the gl3510 4 ports USB3.1 hub. This allows to control its
reset pins with a gpio.
No public documentation is available for this hub. Using the same reset
duration as the gl852g which seems OK.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/usb/misc/onboard_usb_hub.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index 4026ba64c592..a9e2f6023c1c 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -56,6 +56,7 @@ static const struct of_device_id onboard_hub_match[] = {
{ .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
{ .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
{ .compatible = "usb5e3,620", .data = &genesys_gl852g_data, },
+ { .compatible = "usb5e3,626", .data = &genesys_gl852g_data, },
{ .compatible = "usbbda,411", .data = &realtek_rts5411_data, },
{ .compatible = "usbbda,5411", .data = &realtek_rts5411_data, },
{ .compatible = "usbbda,414", .data = &realtek_rts5411_data, },
--
2.40.1
^ permalink raw reply [flat|nested] 3+ messages in thread