From: Piyush Mehta <piyush.mehta@amd.com>
To: <gregkh@linuxfoundation.org>, <michal.simek@amd.com>,
<Thinh.Nguyen@synopsys.com>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<git@amd.com>, Piyush Mehta <piyush.mehta@amd.com>
Subject: [PATCH] usb: dwc3: core: enable CCI support
Date: Fri, 13 Oct 2023 11:04:48 +0530 [thread overview]
Message-ID: <20231013053448.11056-1-piyush.mehta@amd.com> (raw)
The GSBUSCFG0 register bits [31:16] are used to configure the cache type
settings of the descriptor and data write/read transfers (Cacheable,
Bufferable/ Posted). When CCI is enabled in the design, DWC3 core GSBUSCFG0
cache bits must be updated to support CCI enabled transfers in USB.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
---
DWC3 Register Map Link:
https://docs.xilinx.com/r/en-US/ug1087-zynq-ultrascale-registers/GSBUSCFG0-USB3_XHCI-Register
Register Name GSBUSCFG0
Description Global SoC Bus Configuration Register 0
GSBUSCFG0 (USB3_XHCI) Register Bit-Field:
DATRDREQINFO 31:28
DESRDREQINFO 27:24
DATWRREQINFO 23:20
DESWRREQINFO 19:16
---
drivers/usb/dwc3/core.c | 17 +++++++++++++++++
drivers/usb/dwc3/core.h | 5 +++++
2 files changed, 22 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9c6bf054f15d..fc6892c63abf 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_graph.h>
#include <linux/acpi.h>
#include <linux/pinctrl/consumer.h>
@@ -559,6 +560,20 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
parms->hwparams9 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS9);
}
+static void dwc3_config_soc_bus(struct dwc3 *dwc)
+{
+ if (of_dma_is_coherent(dwc->dev->of_node)) {
+ u32 reg;
+
+ reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0);
+ reg |= DWC3_GSBUSCFG0_DATRDREQINFO_MASK |
+ DWC3_GSBUSCFG0_DESRDREQINFO_MASK |
+ DWC3_GSBUSCFG0_DATWRREQINFO_MASK |
+ DWC3_GSBUSCFG0_DESWRREQINFO_MASK;
+ dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg);
+ }
+}
+
static int dwc3_core_ulpi_init(struct dwc3 *dwc)
{
int intf;
@@ -1137,6 +1152,8 @@ static int dwc3_core_init(struct dwc3 *dwc)
dwc3_set_incr_burst_type(dwc);
+ dwc3_config_soc_bus(dwc);
+
ret = dwc3_phy_power_on(dwc);
if (ret)
goto err_exit_phy;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index a69ac67d89fe..bd937025ce05 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -173,6 +173,11 @@
#define DWC3_OSTS 0xcc10
/* Bit fields */
+/* Global SoC Bus Configuration Register: AHB-prot/AXI-cache/OCP-ReqInfo */
+#define DWC3_GSBUSCFG0_DATRDREQINFO_MASK GENMASK(31, 28)
+#define DWC3_GSBUSCFG0_DESRDREQINFO_MASK GENMASK(27, 24)
+#define DWC3_GSBUSCFG0_DATWRREQINFO_MASK GENMASK(23, 20)
+#define DWC3_GSBUSCFG0_DESWRREQINFO_MASK GENMASK(19, 16)
/* Global SoC Bus Configuration INCRx Register 0 */
#define DWC3_GSBUSCFG0_INCR256BRSTENA (1 << 7) /* INCR256 burst */
--
2.17.1
next reply other threads:[~2023-10-13 5:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-13 5:34 Piyush Mehta [this message]
2023-10-20 23:16 ` Thinh Nguyen
2023-11-06 13:48 ` Mehta, Piyush
2023-11-10 2:37 ` Thinh Nguyen
2023-11-17 5:44 ` Mehta, Piyush
2024-02-23 22:47 ` Thinh Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231013053448.11056-1-piyush.mehta@amd.com \
--to=piyush.mehta@amd.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=git@amd.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=michal.simek@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®