[PATCH v2 0/2] arm64: dts: ti: enable more peripherals

[Bryan Brattlof <bb@ti.com>]

Hello again everyone!

This series enables most of the similar peripherals already enabled for
the am62xxx extended family of TI's K3 devices for the am62p SoC and the
am62p5 start kit board

Thanks for reviewing
~Bryan

Changes from v1: [0]
- changed main_conf compatible to simple-bus
- moved all bootph-* properties to bottom of list
- used 0x00 in all reg properties
- reserved mcu_esm for MCU firmware use
- added syscon nodes inside wkup_conf

[0] https://lore.kernel.org/all/20231010035903.520635-4-bb@ti.com/

Vignesh Raghavendra (2):
  arm64: dts: ti: k3-am62p: Add nodes for more IPs
  arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM

 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi    | 811 ++++++++++++++++++-
 arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi     | 190 +++++
 arch/arm64/boot/dts/ti/k3-am62p-thermal.dtsi |  47 ++
 arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi  |  87 +-
 arch/arm64/boot/dts/ti/k3-am62p.dtsi         |   7 +-
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts      | 589 +++++++++++++-
 6 files changed, 1701 insertions(+), 30 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-thermal.dtsi


base-commit: 56bc311585206a8955de793301d4f84fb4ad2ee6
-- 
2.42.0