Re: [PATCH v2 1/2] arm64: dts: ti: k3-am62p: Add nodes for more IPs

[Vignesh Raghavendra <vigneshr@ti.com>]

> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> index aaf4b793b58e7..e37f19f7e58ea 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> @@ -6,17 +6,35 @@
>  
>  &cbass_wakeup {
>  	wkup_conf: bus@43000000 {
> -		bootph-all;
>  		compatible = "simple-bus";
>  		reg = <0x00 0x43000000 0x00 0x20000>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  		ranges = <0x00 0x00 0x43000000 0x20000>;
> +		bootph-all;
>  
>  		chipid: chipid@14 {
> -			bootph-all;
>  			compatible = "ti,am654-chipid";
>  			reg = <0x14 0x4>;
> +			bootph-all;
> +		};
> +
> +		cpsw_efuse: syscon@200 {
> +			compatible = "syscon", "simple-mfd";
> +			reg = <0x200 0x4>;

This holds mac-address which is at least 48bits long

> +			bootph-all;
> +		};
> +
> +		usb0_phy_pll_refclk: syscon@4008 {
> +			compatible = "syscon", "simple-mfd";
> +			reg = <0x4008 0x10>;
> +			bootph-all;
> +		};
> +
> +		usb1_phy_pll_refclk: syscon@4018 {
> +			compatible = "syscon", "simple-mfd";
> +			reg = <0x4018 0x10>;
> +			bootph-all;

This adds new dtbs_check warnings:

+/workdir/arch/arm64/boot/dts/ti/k3-am62p5-sk.dtb: syscon@100000: $nodename:0: 'syscon@100000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
+/workdir/arch/arm64/boot/dts/ti/k3-am62p5-sk.dtb: syscon@200: compatible: ['syscon', 'simple-mfd'] is too short
+/workdir/arch/arm64/boot/dts/ti/k3-am62p5-sk.dtb: syscon@4008: compatible: ['syscon', 'simple-mfd'] is too short
+/workdir/arch/arm64/boot/dts/ti/k3-am62p5-sk.dtb: syscon@4018: compatible: ['syscon', 'simple-mfd'] is too short


I suggest to drop them for now.

Please add a new yamls for these nodes or single yaml for top level wkup_conf to 
cover am62/62a/62p SoCs and then introduce the nodes accordingly

Regards
Vignesh