mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Simon Holesch <simon@holesch.de>
To: Valentina Manea <valentina.manea.m@gmail.com>,
	Shuah Khan <shuah@kernel.org>, Hongren Zheng <i@zenithal.me>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Simon Holesch <simon@holesch.de>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] usbip: Don't submit special requests twice
Date: Tue, 28 Nov 2023 01:08:38 +0100	[thread overview]
Message-ID: <20231128000955.119735-1-simon@holesch.de> (raw)

Skip submitting URBs, when identical requests were already sent in
tweak_special_requests(). Instead call the completion handler directly
to return the result of the URB.

Even though submitting those requests twice should be harmless, there
are USB devices that react poorly to some duplicated requests.

One example is the ChipIdea controller implementation in U-Boot: The
second SET_CONFIURATION request makes U-Boot disable and re-enable all
endpoints. Re-enabling an endpoint in the ChipIdea controller, however,
was broken until U-Boot commit b272c8792502 ("usb: ci: Fix gadget
reinit").

Signed-off-by: Simon Holesch <simon@holesch.de>
---

Changes in v2:
- explain change in commit message

Thanks for the feedback!

 drivers/usb/usbip/stub_rx.c | 50 ++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c
index fc01b31bbb87..f3fcc290ce5b 100644
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -167,13 +167,13 @@ static int tweak_reset_device_cmd(struct urb *urb)
 /*
  * clear_halt, set_interface, and set_configuration require special tricks.
  */
-static void tweak_special_requests(struct urb *urb)
+static int tweak_special_requests(struct urb *urb)
 {
 	if (!urb || !urb->setup_packet)
-		return;
+		return 0;
 
 	if (usb_pipetype(urb->pipe) != PIPE_CONTROL)
-		return;
+		return 0;
 
 	if (is_clear_halt_cmd(urb))
 		/* tweak clear_halt */
@@ -189,8 +189,12 @@ static void tweak_special_requests(struct urb *urb)
 
 	else if (is_reset_device_cmd(urb))
 		tweak_reset_device_cmd(urb);
-	else
+	else {
 		usbip_dbg_stub_rx("no need to tweak\n");
+		return 0;
+	}
+
+	return 1;
 }
 
 /*
@@ -468,6 +472,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
 	int support_sg = 1;
 	int np = 0;
 	int ret, i;
+	int is_tweaked;
 
 	if (pipe == -1)
 		return;
@@ -580,8 +585,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
 		priv->urbs[i]->pipe = pipe;
 		priv->urbs[i]->complete = stub_complete;
 
-		/* no need to submit an intercepted request, but harmless? */
-		tweak_special_requests(priv->urbs[i]);
+		is_tweaked = tweak_special_requests(priv->urbs[i]);
 
 		masking_bogus_flags(priv->urbs[i]);
 	}
@@ -594,22 +598,32 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
 
 	/* urb is now ready to submit */
 	for (i = 0; i < priv->num_urbs; i++) {
-		ret = usb_submit_urb(priv->urbs[i], GFP_KERNEL);
+		if (!is_tweaked) {
+			ret = usb_submit_urb(priv->urbs[i], GFP_KERNEL);
 
-		if (ret == 0)
-			usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
-					pdu->base.seqnum);
-		else {
-			dev_err(&udev->dev, "submit_urb error, %d\n", ret);
-			usbip_dump_header(pdu);
-			usbip_dump_urb(priv->urbs[i]);
+			if (ret == 0)
+				usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
+						pdu->base.seqnum);
+			else {
+				dev_err(&udev->dev, "submit_urb error, %d\n", ret);
+				usbip_dump_header(pdu);
+				usbip_dump_urb(priv->urbs[i]);
 
+				/*
+				 * Pessimistic.
+				 * This connection will be discarded.
+				 */
+				usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
+				break;
+			}
+		} else {
 			/*
-			 * Pessimistic.
-			 * This connection will be discarded.
+			 * An identical URB was already submitted in
+			 * tweak_special_requests(). Skip submitting this URB to not
+			 * duplicate the request.
 			 */
-			usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
-			break;
+			priv->urbs[i]->status = 0;
+			stub_complete(priv->urbs[i]);
 		}
 	}
 
-- 
2.43.0


             reply	other threads:[~2023-11-28  0:10 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-28  0:08 Simon Holesch [this message]
2023-11-28 20:31 ` Shuah Khan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231128000955.119735-1-simon@holesch.de \
    --to=simon@holesch.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=i@zenithal.me \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=shuah@kernel.org \
    --cc=valentina.manea.m@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®