[PATCH V2 2/2] clk: scmi: support state_ctrl_forbidden

["Peng Fan (OSS)" <peng.fan@oss.nxp.com>]

From: Peng Fan <peng.fan@nxp.com>

Some clocks may exported to linux, while those clocks are not allowed
to configure by Linux. For example:

SYS_CLK1-----
             \
	     --MUX--->MMC1_CLK
             /
SYS_CLK2-----

MMC1 needs set parent, so SYS_CLK1 and SYS_CLK2 are exported to Linux,
then the clk propagation will touch SYS_CLK1 or SYS_CLK2.
So we need bypass the failure for SYS_CLK1 or SYS_CLK2 when enable
the clock of MMC1.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

V2:
 New. Take Cristian's suggestion

 drivers/clk/clk-scmi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c
index 8cbe24789c24..1d809813eabd 100644
--- a/drivers/clk/clk-scmi.c
+++ b/drivers/clk/clk-scmi.c
@@ -119,8 +119,14 @@ static int scmi_clk_determine_rate(struct clk_hw *hw, struct clk_rate_request *r
 static int scmi_clk_enable(struct clk_hw *hw)
 {
 	struct scmi_clk *clk = to_scmi_clk(hw);
+	int ret;
+
+	ret = scmi_proto_clk_ops->enable(clk->ph, clk->id, NOT_ATOMIC);
 
-	return scmi_proto_clk_ops->enable(clk->ph, clk->id, NOT_ATOMIC);
+	if (ret == -EACCES && clk->info->state_ctrl_forbidden)
+		return 0;
+
+	return ret;
 }
 
 static void scmi_clk_disable(struct clk_hw *hw)
-- 
2.37.1