From: Peng Fan <peng.fan@oss.nxp.com>
To: sudeep.holla@arm.com, cristian.marussi@arm.com,
mturquette@baylibre.com, sboyd@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, ranjani.vaidyanathan@nxp.com,
glen.wienecke@nxp.com, nitin.garg_3@nxp.com,
chuck.cannon@nxp.com, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V2 1/2] firmware: arm_scmi: clock: implement get permissions
Date: Tue, 9 Jan 2024 09:06:11 +0800 [thread overview]
Message-ID: <cb7e8dea-cab0-ca04-df52-3d588cf01371@oss.nxp.com> (raw)
In-Reply-To: <20231207093345.581048-1-peng.fan@oss.nxp.com>
Hi Sudeep, Cristian,
Are you ok with this patchset? It's been pending for 1 month.
Thanks,
Peng.
On 12/7/2023 5:33 PM, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> ARM SCMI Spec 3.2 introduces Clock Get Permission command. This patch
> is to add the support. Add three bool entries to scmi_clock_info to
> indicate the operation is forbidden or not. If the CLOCK_GET_PERMISSIONS
> command is not supported, the three bool variables will default
> set to false, otherwise they will be set according to the return result
> of CLOCK_GET_PERMISSIONS.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>
> V2:
> Take Cristian's suggestion, https://lore.kernel.org/all/ZWiqqfQ73tezFmSk@pluto/
>
> drivers/firmware/arm_scmi/clock.c | 53 +++++++++++++++++++++++++++++++
> include/linux/scmi_protocol.h | 4 +++
> 2 files changed, 57 insertions(+)
>
> diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
> index 98511a3aa367..0e048530bea2 100644
> --- a/drivers/firmware/arm_scmi/clock.c
> +++ b/drivers/firmware/arm_scmi/clock.c
> @@ -25,8 +25,13 @@ enum scmi_clock_protocol_cmd {
> CLOCK_POSSIBLE_PARENTS_GET = 0xC,
> CLOCK_PARENT_SET = 0xD,
> CLOCK_PARENT_GET = 0xE,
> + CLOCK_GET_PERMISSIONS = 0xF,
> };
>
> +#define CLOCK_STATE_CONTROL_ALLOWED BIT(31)
> +#define CLOCK_PARENT_CONTROL_ALLOWED BIT(30)
> +#define CLOCK_RATE_CONTROL_ALLOWED BIT(29)
> +
> enum clk_state {
> CLK_STATE_DISABLE,
> CLK_STATE_ENABLE,
> @@ -46,6 +51,7 @@ struct scmi_msg_resp_clock_attributes {
> #define SUPPORTS_RATE_CHANGE_REQUESTED_NOTIF(x) ((x) & BIT(30))
> #define SUPPORTS_EXTENDED_NAMES(x) ((x) & BIT(29))
> #define SUPPORTS_PARENT_CLOCK(x) ((x) & BIT(28))
> +#define SUPPORTS_GET_PERMISSIONS(x) ((x) & BIT(1))
> u8 name[SCMI_SHORT_NAME_MAX_SIZE];
> __le32 clock_enable_latency;
> };
> @@ -281,6 +287,35 @@ static int scmi_clock_possible_parents(const struct scmi_protocol_handle *ph, u3
> return ret;
> }
>
> +static int
> +scmi_clock_get_permissions(const struct scmi_protocol_handle *ph, u32 clk_id,
> + struct scmi_clock_info *clk)
> +{
> + struct scmi_xfer *t;
> + u32 perm;
> + int ret;
> +
> + ret = ph->xops->xfer_get_init(ph, CLOCK_GET_PERMISSIONS,
> + sizeof(clk_id), sizeof(perm), &t);
> + if (ret)
> + return ret;
> +
> + put_unaligned_le32(clk_id, t->tx.buf);
> +
> + ret = ph->xops->do_xfer(ph, t);
> + if (!ret) {
> + perm = get_unaligned_le32(t->rx.buf);
> +
> + clk->state_ctrl_forbidden = !(perm & CLOCK_STATE_CONTROL_ALLOWED);
> + clk->rate_ctrl_forbidden = !(perm & CLOCK_RATE_CONTROL_ALLOWED);
> + clk->parent_ctrl_forbidden = !(perm & CLOCK_PARENT_CONTROL_ALLOWED);
> + }
> +
> + ph->xops->xfer_put(ph, t);
> +
> + return ret;
> +}
> +
> static int scmi_clock_attributes_get(const struct scmi_protocol_handle *ph,
> u32 clk_id, struct scmi_clock_info *clk,
> u32 version)
> @@ -307,6 +342,7 @@ static int scmi_clock_attributes_get(const struct scmi_protocol_handle *ph,
> if (PROTOCOL_REV_MAJOR(version) >= 0x2)
> latency = le32_to_cpu(attr->clock_enable_latency);
> clk->enable_latency = latency ? : U32_MAX;
> + clk->attributes = attributes;
> }
>
> ph->xops->xfer_put(ph, t);
> @@ -327,6 +363,8 @@ static int scmi_clock_attributes_get(const struct scmi_protocol_handle *ph,
> clk->rate_change_requested_notifications = true;
> if (SUPPORTS_PARENT_CLOCK(attributes))
> scmi_clock_possible_parents(ph, clk_id, clk);
> + if (SUPPORTS_GET_PERMISSIONS(attributes))
> + scmi_clock_get_permissions(ph, clk_id, clk);
> }
>
> return ret;
> @@ -499,6 +537,10 @@ static int scmi_clock_rate_set(const struct scmi_protocol_handle *ph,
> struct scmi_xfer *t;
> struct scmi_clock_set_rate *cfg;
> struct clock_info *ci = ph->get_priv(ph);
> + struct scmi_clock_info *clk = ci->clk + clk_id;
> +
> + if (clk->rate_ctrl_forbidden)
> + return -EACCES;
>
> ret = ph->xops->xfer_get_init(ph, CLOCK_RATE_SET, sizeof(*cfg), 0, &t);
> if (ret)
> @@ -585,6 +627,9 @@ scmi_clock_set_parent(const struct scmi_protocol_handle *ph, u32 clk_id,
> if (parent_id >= clk->num_parents)
> return -EINVAL;
>
> + if (clk->parent_ctrl_forbidden)
> + return -EACCES;
> +
> ret = ph->xops->xfer_get_init(ph, CLOCK_PARENT_SET,
> sizeof(*cfg), 0, &t);
> if (ret)
> @@ -668,6 +713,10 @@ static int scmi_clock_enable(const struct scmi_protocol_handle *ph, u32 clk_id,
> bool atomic)
> {
> struct clock_info *ci = ph->get_priv(ph);
> + struct scmi_clock_info *clk = ci->clk + clk_id;
> +
> + if (clk->state_ctrl_forbidden)
> + return -EACCES;
>
> return ci->clock_config_set(ph, clk_id, CLK_STATE_ENABLE,
> NULL_OEM_TYPE, 0, atomic);
> @@ -677,6 +726,10 @@ static int scmi_clock_disable(const struct scmi_protocol_handle *ph, u32 clk_id,
> bool atomic)
> {
> struct clock_info *ci = ph->get_priv(ph);
> + struct scmi_clock_info *clk = ci->clk + clk_id;
> +
> + if (clk->state_ctrl_forbidden)
> + return -EACCES;
>
> return ci->clock_config_set(ph, clk_id, CLK_STATE_DISABLE,
> NULL_OEM_TYPE, 0, atomic);
> diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
> index f2f05fb42d28..ad75784b567b 100644
> --- a/include/linux/scmi_protocol.h
> +++ b/include/linux/scmi_protocol.h
> @@ -47,6 +47,9 @@ struct scmi_clock_info {
> bool rate_discrete;
> bool rate_changed_notifications;
> bool rate_change_requested_notifications;
> + bool state_ctrl_forbidden;
> + bool rate_ctrl_forbidden;
> + bool parent_ctrl_forbidden;
> union {
> struct {
> int num_rates;
> @@ -60,6 +63,7 @@ struct scmi_clock_info {
> };
> int num_parents;
> u32 *parents;
> + u32 attributes;
> };
>
> enum scmi_power_scale {
next prev parent reply other threads:[~2024-01-09 1:06 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-07 9:33 Peng Fan (OSS)
2023-12-07 9:33 ` [PATCH V2 2/2] clk: scmi: support state_ctrl_forbidden Peng Fan (OSS)
2024-01-10 15:40 ` Cristian Marussi
2024-01-11 0:07 ` Peng Fan
2024-01-09 1:06 ` Peng Fan [this message]
2024-01-09 8:43 ` [PATCH V2 1/2] firmware: arm_scmi: clock: implement get permissions Cristian Marussi
2024-01-10 15:19 ` Cristian Marussi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cb7e8dea-cab0-ca04-df52-3d588cf01371@oss.nxp.com \
--to=peng.fan@oss.nxp.com \
--cc=chuck.cannon@nxp.com \
--cc=cristian.marussi@arm.com \
--cc=glen.wienecke@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nitin.garg_3@nxp.com \
--cc=peng.fan@nxp.com \
--cc=ranjani.vaidyanathan@nxp.com \
--cc=sboyd@kernel.org \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®