From: Christophe Kerello <christophe.kerello@foss.st.com>
To: <krzysztof.kozlowski@linaro.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<devicetree@vger.kernel.org>,
Christophe Kerello <christophe.kerello@foss.st.com>
Subject: [PATCH v2 3/5] memory: stm32-fmc2-ebi: add MP25 support
Date: Mon, 19 Feb 2024 15:02:00 +0100 [thread overview]
Message-ID: <20240219140202.85680-4-christophe.kerello@foss.st.com> (raw)
In-Reply-To: <20240219140202.85680-1-christophe.kerello@foss.st.com>
Add the support of the revision 2 of FMC2 IP.
- PCSCNTR register has been removed,
- CFGR register has been added,
- the bit used to enable the IP has moved from BCR1 to CFGR,
- the timeout for CEx deassertion has moved from PCSCNTR to BCRx,
- the continuous clock enable has moved from BCR1 to CFGR,
- the clk divide ratio has moved from BCR1 to CFGR.
The MP1 SoCs have only one signal to manage all the controllers (NWAIT).
The MP25 SOC has one RNB signal for the NAND controller and one NWAIT
signal for the memory controller.
Let's use a platform data structure for parameters that will differ
between MP1 and MP25.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
---
Changes in v2:
- V1 patch 3, 4 and 5 have been squashed and reworked.
- a platform data structure is handling the difference between MP1 and MP25.
drivers/memory/stm32-fmc2-ebi.c | 370 ++++++++++++++++++++++++++++++--
1 file changed, 356 insertions(+), 14 deletions(-)
diff --git a/drivers/memory/stm32-fmc2-ebi.c b/drivers/memory/stm32-fmc2-ebi.c
index 6eacfbdd300c..bd823e93e7d1 100644
--- a/drivers/memory/stm32-fmc2-ebi.c
+++ b/drivers/memory/stm32-fmc2-ebi.c
@@ -20,6 +20,7 @@
#define FMC2_BCR(x) ((x) * 0x8 + FMC2_BCR1)
#define FMC2_BTR(x) ((x) * 0x8 + FMC2_BTR1)
#define FMC2_PCSCNTR 0x20
+#define FMC2_CFGR 0x20
#define FMC2_BWTR1 0x104
#define FMC2_BWTR(x) ((x) * 0x8 + FMC2_BWTR1)
@@ -42,6 +43,7 @@
#define FMC2_BCR_ASYNCWAIT BIT(15)
#define FMC2_BCR_CPSIZE GENMASK(18, 16)
#define FMC2_BCR_CBURSTRW BIT(19)
+#define FMC2_BCR_CSCOUNT GENMASK(21, 20)
#define FMC2_BCR_NBLSET GENMASK(23, 22)
/* Register: FMC2_BTRx/FMC2_BWTRx */
@@ -58,6 +60,11 @@
#define FMC2_PCSCNTR_CSCOUNT GENMASK(15, 0)
#define FMC2_PCSCNTR_CNTBEN(x) BIT((x) + 16)
+/* Register: FMC2_CFGR */
+#define FMC2_CFGR_CLKDIV GENMASK(19, 16)
+#define FMC2_CFGR_CCLKEN BIT(20)
+#define FMC2_CFGR_FMC2EN BIT(31)
+
#define FMC2_MAX_EBI_CE 4
#define FMC2_MAX_BANKS 5
@@ -74,6 +81,11 @@
#define FMC2_BCR_MTYP_PSRAM 0x1
#define FMC2_BCR_MTYP_NOR 0x2
+#define FMC2_BCR_CSCOUNT_0 0x0
+#define FMC2_BCR_CSCOUNT_1 0x1
+#define FMC2_BCR_CSCOUNT_64 0x2
+#define FMC2_BCR_CSCOUNT_256 0x3
+
#define FMC2_BXTR_EXTMOD_A 0x0
#define FMC2_BXTR_EXTMOD_B 0x1
#define FMC2_BXTR_EXTMOD_C 0x2
@@ -88,6 +100,7 @@
#define FMC2_BTR_CLKDIV_MAX 0xf
#define FMC2_BTR_DATLAT_MAX 0xf
#define FMC2_PCSCNTR_CSCOUNT_MAX 0xff
+#define FMC2_CFGR_CLKDIV_MAX 0xf
enum stm32_fmc2_ebi_bank {
FMC2_EBI1 = 0,
@@ -101,7 +114,8 @@ enum stm32_fmc2_ebi_register_type {
FMC2_REG_BCR = 1,
FMC2_REG_BTR,
FMC2_REG_BWTR,
- FMC2_REG_PCSCNTR
+ FMC2_REG_PCSCNTR,
+ FMC2_REG_CFGR
};
enum stm32_fmc2_ebi_transaction_type {
@@ -132,16 +146,37 @@ enum stm32_fmc2_ebi_cpsize {
FMC2_CPSIZE_1024 = 1024
};
+enum stm32_fmc2_ebi_cscount {
+ FMC2_CSCOUNT_0 = 0,
+ FMC2_CSCOUNT_1 = 1,
+ FMC2_CSCOUNT_64 = 64,
+ FMC2_CSCOUNT_256 = 256
+};
+
+struct stm32_fmc2_ebi;
+
+struct stm32_fmc2_ebi_data {
+ const struct stm32_fmc2_prop *child_props;
+ unsigned int nb_child_props;
+ u32 fmc2_enable_reg;
+ u32 fmc2_enable_bit;
+ int (*nwait_used_by_ctrls)(struct stm32_fmc2_ebi *ebi);
+ void (*set_setup)(struct stm32_fmc2_ebi *ebi);
+ int (*save_setup)(struct stm32_fmc2_ebi *ebi);
+};
+
struct stm32_fmc2_ebi {
struct device *dev;
struct clk *clk;
struct regmap *regmap;
+ const struct stm32_fmc2_ebi_data *data;
u8 bank_assigned;
u32 bcr[FMC2_MAX_EBI_CE];
u32 btr[FMC2_MAX_EBI_CE];
u32 bwtr[FMC2_MAX_EBI_CE];
u32 pcscntr;
+ u32 cfgr;
};
/*
@@ -353,6 +388,30 @@ static u32 stm32_fmc2_ebi_ns_to_clk_period(struct stm32_fmc2_ebi *ebi,
return DIV_ROUND_UP(nb_clk_cycles, clk_period);
}
+static u32 stm32_fmc2_ebi_mp25_ns_to_clk_period(struct stm32_fmc2_ebi *ebi,
+ int cs, u32 setup)
+{
+ u32 nb_clk_cycles = stm32_fmc2_ebi_ns_to_clock_cycles(ebi, cs, setup);
+ u32 cfgr, btr, clk_period;
+ int ret;
+
+ ret = regmap_read(ebi->regmap, FMC2_CFGR, &cfgr);
+ if (ret)
+ return ret;
+
+ if (cfgr & FMC2_CFGR_CCLKEN) {
+ clk_period = FIELD_GET(FMC2_CFGR_CLKDIV, cfgr) + 1;
+ } else {
+ ret = regmap_read(ebi->regmap, FMC2_BTR(cs), &btr);
+ if (ret)
+ return ret;
+
+ clk_period = FIELD_GET(FMC2_BTR_CLKDIV, btr) + 1;
+ }
+
+ return DIV_ROUND_UP(nb_clk_cycles, clk_period);
+}
+
static int stm32_fmc2_ebi_get_reg(int reg_type, int cs, u32 *reg)
{
switch (reg_type) {
@@ -368,6 +427,9 @@ static int stm32_fmc2_ebi_get_reg(int reg_type, int cs, u32 *reg)
case FMC2_REG_PCSCNTR:
*reg = FMC2_PCSCNTR;
break;
+ case FMC2_REG_CFGR:
+ *reg = FMC2_CFGR;
+ break;
default:
return -EINVAL;
}
@@ -714,6 +776,30 @@ static int stm32_fmc2_ebi_set_clk_period(struct stm32_fmc2_ebi *ebi,
return 0;
}
+static int stm32_fmc2_ebi_mp25_set_clk_period(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val, cfgr;
+ int ret;
+
+ ret = regmap_read(ebi->regmap, FMC2_CFGR, &cfgr);
+ if (ret)
+ return ret;
+
+ if (cfgr & FMC2_CFGR_CCLKEN) {
+ val = setup ? clamp_val(setup - 1, 1, FMC2_CFGR_CLKDIV_MAX) : 1;
+ val = FIELD_PREP(FMC2_CFGR_CLKDIV, val);
+ regmap_update_bits(ebi->regmap, FMC2_CFGR, FMC2_CFGR_CLKDIV, val);
+ } else {
+ val = setup ? clamp_val(setup - 1, 1, FMC2_BTR_CLKDIV_MAX) : 1;
+ val = FIELD_PREP(FMC2_BTR_CLKDIV, val);
+ regmap_update_bits(ebi->regmap, FMC2_BTR(cs), FMC2_BTR_CLKDIV, val);
+ }
+
+ return 0;
+}
+
static int stm32_fmc2_ebi_set_data_latency(struct stm32_fmc2_ebi *ebi,
const struct stm32_fmc2_prop *prop,
int cs, u32 setup)
@@ -759,6 +845,27 @@ static int stm32_fmc2_ebi_set_max_low_pulse(struct stm32_fmc2_ebi *ebi,
return 0;
}
+static int stm32_fmc2_ebi_mp25_set_max_low_pulse(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ if (setup == FMC2_CSCOUNT_0)
+ val = FIELD_PREP(FMC2_BCR_CSCOUNT, FMC2_BCR_CSCOUNT_0);
+ else if (setup == FMC2_CSCOUNT_1)
+ val = FIELD_PREP(FMC2_BCR_CSCOUNT, FMC2_BCR_CSCOUNT_1);
+ else if (setup <= FMC2_CSCOUNT_64)
+ val = FIELD_PREP(FMC2_BCR_CSCOUNT, FMC2_BCR_CSCOUNT_64);
+ else
+ val = FIELD_PREP(FMC2_BCR_CSCOUNT, FMC2_BCR_CSCOUNT_256);
+
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs),
+ FMC2_BCR_CSCOUNT, val);
+
+ return 0;
+}
+
static const struct stm32_fmc2_prop stm32_fmc2_child_props[] = {
/* st,fmc2-ebi-cs-trans-type must be the first property */
{
@@ -924,6 +1031,171 @@ static const struct stm32_fmc2_prop stm32_fmc2_child_props[] = {
},
};
+static const struct stm32_fmc2_prop stm32_fmc2_mp25_child_props[] = {
+ /* st,fmc2-ebi-cs-trans-type must be the first property */
+ {
+ .name = "st,fmc2-ebi-cs-transaction-type",
+ .mprop = true,
+ .set = stm32_fmc2_ebi_set_trans_type,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-cclk-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_CFGR,
+ .reg_mask = FMC2_CFGR_CCLKEN,
+ .check = stm32_fmc2_ebi_check_sync_trans,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-mux-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_MUXEN,
+ .check = stm32_fmc2_ebi_check_mux,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-buswidth",
+ .reset_val = FMC2_BUSWIDTH_16,
+ .set = stm32_fmc2_ebi_set_buswidth,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-waitpol-high",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_WAITPOL,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-waitcfg-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_WAITCFG,
+ .check = stm32_fmc2_ebi_check_waitcfg,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-wait-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_WAITEN,
+ .check = stm32_fmc2_ebi_check_sync_trans,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-asyncwait-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_ASYNCWAIT,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-cpsize",
+ .check = stm32_fmc2_ebi_check_cpsize,
+ .set = stm32_fmc2_ebi_set_cpsize,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-byte-lane-setup-ns",
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_bl_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-address-setup-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_ADDSET_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-address-hold-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_ADDHLD_MAX,
+ .check = stm32_fmc2_ebi_check_address_hold,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-data-setup-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_DATAST_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-bus-turnaround-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_BUSTURN_MAX + 1,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_bus_turnaround,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-data-hold-ns",
+ .reg_type = FMC2_REG_BTR,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-clk-period-ns",
+ .reset_val = FMC2_CFGR_CLKDIV_MAX + 1,
+ .check = stm32_fmc2_ebi_check_sync_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_mp25_set_clk_period,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-data-latency-ns",
+ .check = stm32_fmc2_ebi_check_sync_trans,
+ .calculate = stm32_fmc2_ebi_mp25_ns_to_clk_period,
+ .set = stm32_fmc2_ebi_set_data_latency,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-address-setup-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_ADDSET_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-address-hold-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_ADDHLD_MAX,
+ .check = stm32_fmc2_ebi_check_address_hold,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-data-setup-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_DATAST_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-bus-turnaround-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_BUSTURN_MAX + 1,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_bus_turnaround,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-data-hold-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-max-low-pulse-ns",
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_mp25_set_max_low_pulse,
+ },
+};
+
static int stm32_fmc2_ebi_parse_prop(struct stm32_fmc2_ebi *ebi,
struct device_node *dev_node,
const struct stm32_fmc2_prop *prop,
@@ -1005,9 +1277,31 @@ static int stm32_fmc2_ebi_save_setup(struct stm32_fmc2_ebi *ebi)
return ret;
}
+ return 0;
+}
+
+static int stm32_fmc2_ebi_mp1_save_setup(struct stm32_fmc2_ebi *ebi)
+{
+ int ret;
+
+ ret = stm32_fmc2_ebi_save_setup(ebi);
+ if (ret)
+ return ret;
+
return regmap_read(ebi->regmap, FMC2_PCSCNTR, &ebi->pcscntr);
}
+static int stm32_fmc2_ebi_mp25_save_setup(struct stm32_fmc2_ebi *ebi)
+{
+ int ret;
+
+ ret = stm32_fmc2_ebi_save_setup(ebi);
+ if (ret)
+ return ret;
+
+ return regmap_read(ebi->regmap, FMC2_CFGR, &ebi->cfgr);
+}
+
static void stm32_fmc2_ebi_set_setup(struct stm32_fmc2_ebi *ebi)
{
unsigned int cs;
@@ -1017,10 +1311,20 @@ static void stm32_fmc2_ebi_set_setup(struct stm32_fmc2_ebi *ebi)
regmap_write(ebi->regmap, FMC2_BTR(cs), ebi->btr[cs]);
regmap_write(ebi->regmap, FMC2_BWTR(cs), ebi->bwtr[cs]);
}
+}
+static void stm32_fmc2_ebi_mp1_set_setup(struct stm32_fmc2_ebi *ebi)
+{
+ stm32_fmc2_ebi_set_setup(ebi);
regmap_write(ebi->regmap, FMC2_PCSCNTR, ebi->pcscntr);
}
+static void stm32_fmc2_ebi_mp25_set_setup(struct stm32_fmc2_ebi *ebi)
+{
+ stm32_fmc2_ebi_set_setup(ebi);
+ regmap_write(ebi->regmap, FMC2_CFGR, ebi->cfgr);
+}
+
static void stm32_fmc2_ebi_disable_banks(struct stm32_fmc2_ebi *ebi)
{
unsigned int cs;
@@ -1061,13 +1365,15 @@ static int stm32_fmc2_ebi_nwait_used_by_ctrls(struct stm32_fmc2_ebi *ebi)
static void stm32_fmc2_ebi_enable(struct stm32_fmc2_ebi *ebi)
{
- regmap_update_bits(ebi->regmap, FMC2_BCR1,
- FMC2_BCR1_FMC2EN, FMC2_BCR1_FMC2EN);
+ regmap_update_bits(ebi->regmap, ebi->data->fmc2_enable_reg,
+ ebi->data->fmc2_enable_bit,
+ ebi->data->fmc2_enable_bit);
}
static void stm32_fmc2_ebi_disable(struct stm32_fmc2_ebi *ebi)
{
- regmap_update_bits(ebi->regmap, FMC2_BCR1, FMC2_BCR1_FMC2EN, 0);
+ regmap_update_bits(ebi->regmap, ebi->data->fmc2_enable_reg,
+ ebi->data->fmc2_enable_bit, 0);
}
static int stm32_fmc2_ebi_setup_cs(struct stm32_fmc2_ebi *ebi,
@@ -1079,8 +1385,8 @@ static int stm32_fmc2_ebi_setup_cs(struct stm32_fmc2_ebi *ebi,
stm32_fmc2_ebi_disable_bank(ebi, cs);
- for (i = 0; i < ARRAY_SIZE(stm32_fmc2_child_props); i++) {
- const struct stm32_fmc2_prop *p = &stm32_fmc2_child_props[i];
+ for (i = 0; i < ebi->data->nb_child_props; i++) {
+ const struct stm32_fmc2_prop *p = &ebi->data->child_props[i];
ret = stm32_fmc2_ebi_parse_prop(ebi, dev_node, p, cs);
if (ret) {
@@ -1143,9 +1449,11 @@ static int stm32_fmc2_ebi_parse_dt(struct stm32_fmc2_ebi *ebi)
return -ENODEV;
}
- ret = stm32_fmc2_ebi_nwait_used_by_ctrls(ebi);
- if (ret)
- return ret;
+ if (ebi->data->nwait_used_by_ctrls) {
+ ret = ebi->data->nwait_used_by_ctrls(ebi);
+ if (ret)
+ return ret;
+ }
stm32_fmc2_ebi_enable(ebi);
@@ -1165,6 +1473,10 @@ static int stm32_fmc2_ebi_probe(struct platform_device *pdev)
ebi->dev = dev;
+ ebi->data = of_device_get_match_data(dev);
+ if (!ebi->data)
+ return -EINVAL;
+
ebi->regmap = device_node_to_regmap(dev->of_node);
if (IS_ERR(ebi->regmap))
return PTR_ERR(ebi->regmap);
@@ -1190,9 +1502,11 @@ static int stm32_fmc2_ebi_probe(struct platform_device *pdev)
if (ret)
goto err_release;
- ret = stm32_fmc2_ebi_save_setup(ebi);
- if (ret)
- goto err_release;
+ if (ebi->data->save_setup) {
+ ret = ebi->data->save_setup(ebi);
+ if (ret)
+ goto err_release;
+ }
platform_set_drvdata(pdev, ebi);
@@ -1238,7 +1552,9 @@ static int __maybe_unused stm32_fmc2_ebi_resume(struct device *dev)
if (ret)
return ret;
- stm32_fmc2_ebi_set_setup(ebi);
+ if (ebi->data->set_setup)
+ ebi->data->set_setup(ebi);
+
stm32_fmc2_ebi_enable(ebi);
return 0;
@@ -1247,8 +1563,34 @@ static int __maybe_unused stm32_fmc2_ebi_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(stm32_fmc2_ebi_pm_ops, stm32_fmc2_ebi_suspend,
stm32_fmc2_ebi_resume);
+static const struct stm32_fmc2_ebi_data stm32_fmc2_ebi_mp1_data = {
+ .child_props = stm32_fmc2_child_props,
+ .nb_child_props = ARRAY_SIZE(stm32_fmc2_child_props),
+ .fmc2_enable_reg = FMC2_BCR1,
+ .fmc2_enable_bit = FMC2_BCR1_FMC2EN,
+ .nwait_used_by_ctrls = stm32_fmc2_ebi_nwait_used_by_ctrls,
+ .set_setup = stm32_fmc2_ebi_mp1_set_setup,
+ .save_setup = stm32_fmc2_ebi_mp1_save_setup,
+};
+
+static const struct stm32_fmc2_ebi_data stm32_fmc2_ebi_mp25_data = {
+ .child_props = stm32_fmc2_mp25_child_props,
+ .nb_child_props = ARRAY_SIZE(stm32_fmc2_mp25_child_props),
+ .fmc2_enable_reg = FMC2_CFGR,
+ .fmc2_enable_bit = FMC2_CFGR_FMC2EN,
+ .set_setup = stm32_fmc2_ebi_mp25_set_setup,
+ .save_setup = stm32_fmc2_ebi_mp25_save_setup,
+};
+
static const struct of_device_id stm32_fmc2_ebi_match[] = {
- {.compatible = "st,stm32mp1-fmc2-ebi"},
+ {
+ .compatible = "st,stm32mp1-fmc2-ebi",
+ .data = &stm32_fmc2_ebi_mp1_data,
+ },
+ {
+ .compatible = "st,stm32mp25-fmc2-ebi",
+ .data = &stm32_fmc2_ebi_mp25_data,
+ },
{}
};
MODULE_DEVICE_TABLE(of, stm32_fmc2_ebi_match);
--
2.25.1
next prev parent reply other threads:[~2024-02-19 14:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-19 14:01 [PATCH v2 0/5] memory: stm32-fmc2-ebi: Add MP25 FMC2 support Christophe Kerello
2024-02-19 14:01 ` [PATCH v2 1/5] dt-bindings: memory-controller: st,stm32: add MP25 support Christophe Kerello
2024-02-20 9:56 ` Krzysztof Kozlowski
2024-02-21 8:27 ` Krzysztof Kozlowski
2024-02-19 14:01 ` [PATCH v2 2/5] memory: stm32-fmc2-ebi: check regmap_read return value Christophe Kerello
2024-02-21 8:29 ` Krzysztof Kozlowski
2024-02-26 8:25 ` Christophe Kerello
2024-02-19 14:02 ` Christophe Kerello [this message]
2024-02-21 8:32 ` [PATCH v2 3/5] memory: stm32-fmc2-ebi: add MP25 support Krzysztof Kozlowski
2024-02-26 8:26 ` Christophe Kerello
2024-02-19 14:02 ` [PATCH v2 4/5] memory: stm32-fmc2-ebi: add MP25 RIF support Christophe Kerello
2024-02-19 14:02 ` [PATCH v2 5/5] memory: stm32-fmc2-ebi: keep power domain on Christophe Kerello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240219140202.85680-4-christophe.kerello@foss.st.com \
--to=christophe.kerello@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®