Re: [PATCH v2 3/5] memory: stm32-fmc2-ebi: add MP25 support

[Christophe Kerello <christophe.kerello@foss.st.com>]

Hi Krzysztof,

On 2/21/24 09:32, Krzysztof Kozlowski wrote:
> On 19/02/2024 15:02, Christophe Kerello wrote:
>> Add the support of the revision 2 of FMC2 IP.
>>       - PCSCNTR register has been removed,
>>       - CFGR register has been added,
>>       - the bit used to enable the IP has moved from BCR1 to CFGR,
>>       - the timeout for CEx deassertion has moved from PCSCNTR to BCRx,
>>       - the continuous clock enable has moved from BCR1 to CFGR,
>>       - the clk divide ratio has moved from BCR1 to CFGR.
>>
>> The MP1 SoCs have only one signal to manage all the controllers (NWAIT).
>> The MP25 SOC has one RNB signal for the NAND controller and one NWAIT
>> signal for the memory controller.
>>
>> Let's use a platform data structure for parameters that will differ
>> between MP1 and MP25.
> 
> 
> ...
> 
>> +
>>   	ebi->regmap = device_node_to_regmap(dev->of_node);
>>   	if (IS_ERR(ebi->regmap))
>>   		return PTR_ERR(ebi->regmap);
>> @@ -1190,9 +1502,11 @@ static int stm32_fmc2_ebi_probe(struct platform_device *pdev)
>>   	if (ret)
>>   		goto err_release;
>>   
>> -	ret = stm32_fmc2_ebi_save_setup(ebi);
>> -	if (ret)
>> -		goto err_release;
>> +	if (ebi->data->save_setup) {
> 
> This cannot be NULL.

Ok, it will be done in V3.

Regards,
Christophe Kerello.

> 
>> +		ret = ebi->data->save_setup(ebi);
>> +		if (ret)
>> +			goto err_release;
>> +	}
>>   
>>   	platform_set_drvdata(pdev, ebi);
>>   
>> @@ -1238,7 +1552,9 @@ static int __maybe_unused stm32_fmc2_ebi_resume(struct device *dev)
>>   	if (ret)
>>   		return ret;
>>   
>> -	stm32_fmc2_ebi_set_setup(ebi);
>> +	if (ebi->data->set_setup)
> 
> This cannot be NULL.
> 
> 
> 
> Best regards,
> Krzysztof
>