* [PATCH] usb: typec: tcpm: support sink port for debounce
@ 2024-03-12 1:13 Michael Wu
2024-03-12 11:07 ` Heikki Krogerus
0 siblings, 1 reply; 2+ messages in thread
From: Michael Wu @ 2024-03-12 1:13 UTC (permalink / raw)
To: heikki.krogerus, gregkh, linux, badhri, kyletso, frank.wang,
rdbabiera, xu.yang_2
Cc: linux-usb, linux-kernel
When both CC1 and CC2 pins are simultaneously pulled up, it often leads
to the double Rp to Vbus cable being stuck in the SNK_ATTACH_WAIT state.
And the state machine fails to transition to the SNK_ATTACHED state.
Therefore, it is recommended to focus on transitioning the sink port to
the SNK_DEBOUNCED state instead. By doing so, the desired outcome can be
achieved more effectively.
[ 134.525750] VBUS on
[ 134.713240] CC1: 0 -> 3, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected]
[ 134.713249] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
Signed-off-by: Michael Wu <michael@allwinnertech.com>
---
drivers/usb/typec/tcpm/tcpm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 0965972310275..9228dbd78bf2b 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -4197,6 +4197,8 @@ static void run_state_machine(struct tcpm_port *port)
else if (tcpm_port_is_disconnected(port))
tcpm_set_state(port, SNK_UNATTACHED,
PD_T_PD_DEBOUNCE);
+ else if (tcpm_port_is_sink(port))
+ tcpm_set_state(port, SNK_DEBOUNCED, 0);
break;
case SNK_DEBOUNCED:
if (tcpm_port_is_disconnected(port))
--
2.29.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] usb: typec: tcpm: support sink port for debounce
2024-03-12 1:13 [PATCH] usb: typec: tcpm: support sink port for debounce Michael Wu
@ 2024-03-12 11:07 ` Heikki Krogerus
0 siblings, 0 replies; 2+ messages in thread
From: Heikki Krogerus @ 2024-03-12 11:07 UTC (permalink / raw)
To: Michael Wu
Cc: gregkh, linux, badhri, kyletso, frank.wang, rdbabiera, xu.yang_2,
linux-usb, linux-kernel
On Tue, Mar 12, 2024 at 09:13:00AM +0800, Michael Wu wrote:
> When both CC1 and CC2 pins are simultaneously pulled up, it often leads
> to the double Rp to Vbus cable being stuck in the SNK_ATTACH_WAIT state.
> And the state machine fails to transition to the SNK_ATTACHED state.
>
> Therefore, it is recommended to focus on transitioning the sink port to
> the SNK_DEBOUNCED state instead. By doing so, the desired outcome can be
> achieved more effectively.
Recommended by whom (or what)?
> [ 134.525750] VBUS on
> [ 134.713240] CC1: 0 -> 3, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected]
> [ 134.713249] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
>
> Signed-off-by: Michael Wu <michael@allwinnertech.com>
> ---
> drivers/usb/typec/tcpm/tcpm.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 0965972310275..9228dbd78bf2b 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -4197,6 +4197,8 @@ static void run_state_machine(struct tcpm_port *port)
> else if (tcpm_port_is_disconnected(port))
> tcpm_set_state(port, SNK_UNATTACHED,
> PD_T_PD_DEBOUNCE);
> + else if (tcpm_port_is_sink(port))
> + tcpm_set_state(port, SNK_DEBOUNCED, 0);
> break;
> case SNK_DEBOUNCED:
> if (tcpm_port_is_disconnected(port))
> --
> 2.29.0
--
heikki
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-03-12 11:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-03-12 1:13 [PATCH] usb: typec: tcpm: support sink port for debounce Michael Wu
2024-03-12 11:07 ` Heikki Krogerus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®