mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2] selftests/seccomp: Try to fit runtime of benchmark into timeout
@ 2024-03-25 16:57 Mark Brown
  2024-03-26 19:39 ` Shuah Khan
  0 siblings, 1 reply; 2+ messages in thread
From: Mark Brown @ 2024-03-25 16:57 UTC (permalink / raw)
  To: Kees Cook, Andy Lutomirski, Will Drewry, Shuah Khan
  Cc: linux-kselftest, linux-kernel, Mark Brown

The seccomp benchmark runs five scenarios, one calibration run with no
seccomp filters enabled then four further runs each adding a filter. The
calibration run times itself for 15s and then each additional run executes
for the same number of times.

Currently the seccomp tests, including the benchmark, run with an extended
120s timeout but this is not sufficient to robustly run the tests on a lot
of platforms. Sample timings from some recent runs:

   Platform          Run 1  Run 2  Run 3  Run 4
   ---------         -----  -----  -----  -----
   PowerEdge R200    16.6s  16.6s  31.6s  37.4s
   BBB (arm)         20.4s  20.4s  54.5s
   Synquacer (arm64) 20.7s  23.7s  40.3s

The x86 runs from the PowerEdge are quite marginal and routinely fail, for
the successful run reported here the timed portions of the run are at
117.2s leaving less than 3s of margin which is frequently breached. The
added overhead of adding filters on the other platforms is such that there
is no prospect of their runs fitting into the 120s timeout, especially
on 32 bit arm where there is no BPF JIT.

While we could lower the time we calibrate for I'm also already seeing the
currently completing runs reporting issues with the per filter overheads
not matching expectations:

Let's instead raise the timeout to 180s which is only a 50% increase on the
current timeout which is itself not *too* large given that there's only two
tests in this suite.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
Changes in v2:
- Rebase onto v6.9-rc1.
- Link to v1: https://lore.kernel.org/r/20231219-b4-kselftest-seccomp-benchmark-timeout-v1-1-8515c73015b9@kernel.org
---
 tools/testing/selftests/seccomp/settings | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/seccomp/settings b/tools/testing/selftests/seccomp/settings
index 6091b45d226b..a953c96aa16e 100644
--- a/tools/testing/selftests/seccomp/settings
+++ b/tools/testing/selftests/seccomp/settings
@@ -1 +1 @@
-timeout=120
+timeout=180

---
base-commit: 4cece764965020c22cff7665b18a012006359095
change-id: 20231219-b4-kselftest-seccomp-benchmark-timeout-05b66e7d29d1

Best regards,
-- 
Mark Brown <broonie@kernel.org>


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH v2] selftests/seccomp: Try to fit runtime of benchmark into timeout
  2024-03-25 16:57 [PATCH v2] selftests/seccomp: Try to fit runtime of benchmark into timeout Mark Brown
@ 2024-03-26 19:39 ` Shuah Khan
  0 siblings, 0 replies; 2+ messages in thread
From: Shuah Khan @ 2024-03-26 19:39 UTC (permalink / raw)
  To: Mark Brown, Kees Cook, Andy Lutomirski, Will Drewry, Shuah Khan
  Cc: linux-kselftest, linux-kernel, Shuah Khan

On 3/25/24 10:57, Mark Brown wrote:
> The seccomp benchmark runs five scenarios, one calibration run with no
> seccomp filters enabled then four further runs each adding a filter. The
> calibration run times itself for 15s and then each additional run executes
> for the same number of times.
> 
> Currently the seccomp tests, including the benchmark, run with an extended
> 120s timeout but this is not sufficient to robustly run the tests on a lot
> of platforms. Sample timings from some recent runs:
> 
>     Platform          Run 1  Run 2  Run 3  Run 4
>     ---------         -----  -----  -----  -----
>     PowerEdge R200    16.6s  16.6s  31.6s  37.4s
>     BBB (arm)         20.4s  20.4s  54.5s
>     Synquacer (arm64) 20.7s  23.7s  40.3s
> 
> The x86 runs from the PowerEdge are quite marginal and routinely fail, for
> the successful run reported here the timed portions of the run are at
> 117.2s leaving less than 3s of margin which is frequently breached. The
> added overhead of adding filters on the other platforms is such that there
> is no prospect of their runs fitting into the 120s timeout, especially
> on 32 bit arm where there is no BPF JIT.
> 
> While we could lower the time we calibrate for I'm also already seeing the
> currently completing runs reporting issues with the per filter overheads
> not matching expectations:
> 
> Let's instead raise the timeout to 180s which is only a 50% increase on the
> current timeout which is itself not *too* large given that there's only two
> tests in this suite.
> 
> Signed-off-by: Mark Brown <broonie@kernel.org>
> ---
> Changes in v2:
> - Rebase onto v6.9-rc1.
> - Link to v1: https://lore.kernel.org/r/20231219-b4-kselftest-seccomp-benchmark-timeout-v1-1-8515c73015b9@kernel.org

Applied to linux-kselftest fixes for next rc.

thanks,
-- Shuah


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2024-03-26 19:39 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-03-25 16:57 [PATCH v2] selftests/seccomp: Try to fit runtime of benchmark into timeout Mark Brown
2024-03-26 19:39 ` Shuah Khan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®