[PATCH] module: create weak dependecies

[PATCH] module: create weak dependecies

[Jose Ignacio Tornos Martinez]

It has been seen that for some network mac drivers (i.e. lan78xx) the
related module for the phy is loaded dynamically depending on the current
hardware. In this case, the associated phy is read using mdio bus and then
the associated phy module is loaded during runtime (kernel function
phy_request_driver_module). However, no software dependency is defined, so
the user tools will no be able to get this dependency. For example, if
dracut is used and the hardware is present, lan78xx will be included but no
phy module will be added, and in the next restart the device will not work
from boot because no related phy will be found during initramfs stage.

In order to solve this, we could define a normal 'pre' software dependency
in lan78xx module with all the possible phy modules (there may be some),
but proceeding in that way, all the possible phy modules would be loaded
while only one is necessary.

The idea is to create a new type of dependency, that we are going to call
'weak' to be used only by the user tools that need to detect this situation.
In that way, for example, dracut could check the 'weak' dependency of the
modules involved in order to install these dependencies in initramfs too.
That is, for the commented lan78xx module, defining the 'weak' dependency
with the possible phy modules list, only the necessary phy would be loaded
on demand keeping the same behavior, but all the possible phy modules would
be available from initramfs.

Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
---
 include/linux/module.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/linux/module.h b/include/linux/module.h
index 1153b0d99a80..231e710d8736 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -173,6 +173,11 @@ extern void cleanup_module(void);
  */
 #define MODULE_SOFTDEP(_softdep) MODULE_INFO(softdep, _softdep)
 
+/* Weak module dependencies. See man modprobe.d for details.
+ * Example: MODULE_WEAKDEP("module-foo")
+ */
+#define MODULE_WEAKDEP(_weakdep) MODULE_INFO(weakdep, _weakdep)
+
 /*
  * MODULE_FILE is used for generating modules.builtin
  * So, make it no-op when this is being built as a module
-- 
2.44.0