mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <patches@opensource.cirrus.com>,
	"Richard Fitzgerald" <rf@opensource.cirrus.com>
Subject: [PATCH 10/11] regmap: kunit: Add cache-drop test with multiple cache blocks
Date: Mon, 8 Apr 2024 15:45:59 +0100	[thread overview]
Message-ID: <20240408144600.230848-11-rf@opensource.cirrus.com> (raw)
In-Reply-To: <20240408144600.230848-1-rf@opensource.cirrus.com>

Add a test case for dropping only some cache blocks and leaving others
unchanged.

The regmap is divided into 8 register ranges, and only 4 of these are
written with values. This creates 4 non-contiguous ranges of registers
with cached values.

One whole range is then dropped, and part of another range. A cache
sync is then performed to check that the correct registers were written,
and the correct values were written to these registers.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
 drivers/base/regmap/regmap-kunit.c | 103 +++++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)

diff --git a/drivers/base/regmap/regmap-kunit.c b/drivers/base/regmap/regmap-kunit.c
index 4c29d2db4d20..6e469609c82c 100644
--- a/drivers/base/regmap/regmap-kunit.c
+++ b/drivers/base/regmap/regmap-kunit.c
@@ -1007,6 +1007,108 @@ static void cache_drop(struct kunit *test)
 	KUNIT_EXPECT_MEMEQ(test, &data->vals[param->from_reg], rval, sizeof(rval));
 }
 
+static void cache_drop_with_non_contiguous_ranges(struct kunit *test)
+{
+	const struct regmap_test_param *param = test->param_value;
+	struct regmap *map;
+	struct regmap_config config;
+	struct regmap_ram_data *data;
+	unsigned int val[4][BLOCK_TEST_SIZE];
+	unsigned int reg;
+	const int num_ranges = ARRAY_SIZE(val) * 2;
+	int rangeidx, i;
+
+	static_assert(ARRAY_SIZE(val) == 4);
+
+	config = test_regmap_config;
+	config.max_register = param->from_reg + (num_ranges * BLOCK_TEST_SIZE);
+
+	map = gen_regmap(test, &config, &data);
+	KUNIT_ASSERT_FALSE(test, IS_ERR(map));
+	if (IS_ERR(map))
+		return;
+
+	for (i = 0; i < config.max_register + 1; i++)
+		data->written[i] = false;
+
+	/* Create non-contiguous cache blocks by writing every other range */
+	get_random_bytes(&val, sizeof(val));
+	for (rangeidx = 0; rangeidx < num_ranges; rangeidx += 2) {
+		reg = param->from_reg + (rangeidx * BLOCK_TEST_SIZE);
+		KUNIT_EXPECT_EQ(test, 0, regmap_bulk_write(map, reg,
+							   &val[rangeidx / 2],
+							   BLOCK_TEST_SIZE));
+		KUNIT_EXPECT_MEMEQ(test, &data->vals[reg],
+				   &val[rangeidx / 2], sizeof(val[rangeidx / 2]));
+	}
+
+	/* Check that odd ranges weren't written */
+	for (rangeidx = 1; rangeidx < num_ranges; rangeidx += 2) {
+		reg = param->from_reg + (rangeidx * BLOCK_TEST_SIZE);
+		for (i = 0; i < BLOCK_TEST_SIZE; i++)
+			KUNIT_EXPECT_FALSE(test, data->written[reg + i]);
+	}
+
+	/* Drop range 2 */
+	reg = param->from_reg + (2 * BLOCK_TEST_SIZE);
+	KUNIT_EXPECT_EQ(test, 0, regcache_drop_region(map, reg, reg + BLOCK_TEST_SIZE - 1));
+
+	/* Drop part of range 4 */
+	reg = param->from_reg + (4 * BLOCK_TEST_SIZE);
+	KUNIT_EXPECT_EQ(test, 0, regcache_drop_region(map, reg + 3, reg + 5));
+
+	/* Mark dirty and reset mock registers to 0 */
+	regcache_mark_dirty(map);
+	for (i = 0; i < config.max_register + 1; i++) {
+		data->vals[i] = 0;
+		data->written[i] = false;
+	}
+
+	/* The registers that were dropped from range 4 should now remain at 0 */
+	val[4 / 2][3] = 0;
+	val[4 / 2][4] = 0;
+	val[4 / 2][5] = 0;
+
+	/* Sync and check that the expected register ranges were written */
+	KUNIT_EXPECT_EQ(test, 0, regcache_sync(map));
+
+	/* Check that odd ranges weren't written */
+	for (rangeidx = 1; rangeidx < num_ranges; rangeidx += 2) {
+		reg = param->from_reg + (rangeidx * BLOCK_TEST_SIZE);
+		for (i = 0; i < BLOCK_TEST_SIZE; i++)
+			KUNIT_EXPECT_FALSE(test, data->written[reg + i]);
+	}
+
+	/* Check that even ranges (except 2 and 4) were written */
+	for (rangeidx = 0; rangeidx < num_ranges; rangeidx += 2) {
+		if ((rangeidx == 2) || (rangeidx == 4))
+			continue;
+
+		reg = param->from_reg + (rangeidx * BLOCK_TEST_SIZE);
+		for (i = 0; i < BLOCK_TEST_SIZE; i++)
+			KUNIT_EXPECT_TRUE(test, data->written[reg + i]);
+
+		KUNIT_EXPECT_MEMEQ(test, &data->vals[reg],
+				   &val[rangeidx / 2], sizeof(val[rangeidx / 2]));
+	}
+
+	/* Check that range 2 wasn't written */
+	reg = param->from_reg + (2 * BLOCK_TEST_SIZE);
+	for (i = 0; i < BLOCK_TEST_SIZE; i++)
+		KUNIT_EXPECT_FALSE(test, data->written[reg + i]);
+
+	/* Check that range 4 was partially written */
+	reg = param->from_reg + (4 * BLOCK_TEST_SIZE);
+	for (i = 0; i < BLOCK_TEST_SIZE; i++)
+		KUNIT_EXPECT_EQ(test, data->written[reg + i], i < 3 || i > 5);
+
+	KUNIT_EXPECT_MEMEQ(test, &data->vals[reg], &val[4 / 2], sizeof(val[4 / 2]));
+
+	/* Nothing before param->from_reg should have been written */
+	for (i = 0; i < param->from_reg; i++)
+		KUNIT_EXPECT_FALSE(test, data->written[i]);
+}
+
 static void cache_drop_all_and_sync_marked_dirty(struct kunit *test)
 {
 	const struct regmap_test_param *param = test->param_value;
@@ -1663,6 +1765,7 @@ static struct kunit_case regmap_test_cases[] = {
 	KUNIT_CASE_PARAM(cache_sync_readonly, real_cache_types_gen_params),
 	KUNIT_CASE_PARAM(cache_sync_patch, real_cache_types_gen_params),
 	KUNIT_CASE_PARAM(cache_drop, sparse_cache_types_gen_params),
+	KUNIT_CASE_PARAM(cache_drop_with_non_contiguous_ranges, sparse_cache_types_gen_params),
 	KUNIT_CASE_PARAM(cache_drop_all_and_sync_marked_dirty, sparse_cache_types_gen_params),
 	KUNIT_CASE_PARAM(cache_drop_all_and_sync_no_defaults, sparse_cache_types_gen_params),
 	KUNIT_CASE_PARAM(cache_drop_all_and_sync_has_defaults, sparse_cache_types_gen_params),
-- 
2.39.2


  parent reply	other threads:[~2024-04-08 14:46 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-08 14:45 [PATCH 00/11] regmap: kunit: Add some test cases and a few small improvements Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 01/11] regmap: kunit: Fix warnings of implicit casts to __le16 and __be16 Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 02/11] regmap: kunit: Create a struct device for the regmap Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 03/11] regmap: kunit: Introduce struct for test case parameters Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 04/11] regmap: kunit: Run sparse cache tests at non-zero register addresses Richard Fitzgerald
2024-05-16 19:53   ` Guenter Roeck
2024-05-17 11:28     ` Mark Brown
2024-05-17 15:19       ` Guenter Roeck
2024-05-17 11:58     ` Richard Fitzgerald
2024-05-17 13:10     ` Richard Fitzgerald
2024-05-17 15:44     ` Richard Fitzgerald
2024-05-17 15:57       ` Guenter Roeck
2024-04-08 14:45 ` [PATCH 05/11] regmap: kunit: Run non-sparse " Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 06/11] regmap: kunit: Add more cache-drop tests Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 07/11] regmap: kunit: Add more cache-sync tests Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 08/11] regmap: kunit: Use a KUnit action to call regmap_exit() Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 09/11] regmap: kunit: Replace a kmalloc/kfree() pair with KUnit-managed alloc Richard Fitzgerald
2024-04-08 14:45 ` Richard Fitzgerald [this message]
2024-04-08 14:46 ` [PATCH 11/11] regmap: kunit: Add test cases for regmap_read_bypassed() Richard Fitzgerald
2024-04-09 23:34 ` [PATCH 00/11] regmap: kunit: Add some test cases and a few small improvements Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240408144600.230848-11-rf@opensource.cirrus.com \
    --to=rf@opensource.cirrus.com \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®