[PATCH 2/2] drivers: thermal: fix zero weighted request power

[PATCH 2/2] drivers: thermal: fix zero weighted request power

[Chia-Hao Liu]

When the product of weight and req_power is less than 1024,
the `frac_to_int()` macro causes the weighted_req_power to
become zero, it will cause granted_power to be zero.
To address issue, I add a check:
If the weight is less than 1024, frac_to_int() is not applied
to avoid setting the weighted_req_power to zero.

Signed-off-by: Chia-Hao Liu <a0921444212@gmail.com>
---
 drivers/thermal/gov_power_allocator.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 336b48745..c878cbb62 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -434,10 +434,10 @@ static void allocate_power(struct thermal_zone_device *tz, int control_temp)
 		else
 			weight = instance->weight;
         
-        if (weight < 1024) 
-		    pa->weighted_req_power = weight * pa->req_power;
+		if (weight < 1024)
+			pa->weighted_req_power = weight * pa->req_power;
 		else
-            pa->weighted_req_power = frac_to_int(weight * pa->req_power);
+			pa->weighted_req_power = frac_to_int(weight * pa->req_power);
 
 		ret = cdev->ops->state2power(cdev, instance->lower,
 					     &pa->max_power);
-- 
2.34.1