mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Diogo Ivo <diogo.ivo@siemens.com>
To: MD Danish Anwar <danishanwar@ti.com>,
	Roger Quadros <rogerq@kernel.org>,
	 "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	 Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,
	 Richard Cochran <richardcochran@gmail.com>,
	Nishanth Menon <nm@ti.com>,
	 Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>,  Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Jan Kiszka <jan.kiszka@siemens.com>,
	 Jacob Keller <jacob.e.keller@intel.com>,
	Simon Horman <horms@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
	 linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	 Diogo Ivo <diogo.ivo@siemens.com>
Subject: [PATCH net-next v2 2/3] net: ti: icss-iep: Enable compare events
Date: Tue, 04 Jun 2024 14:15:11 +0100	[thread overview]
Message-ID: <20240604-iep-v2-2-ea8e1c0a5686@siemens.com> (raw)
In-Reply-To: <20240604-iep-v2-0-ea8e1c0a5686@siemens.com>

The IEP module supports compare events, in which a value is written to a
hardware register and when the IEP counter reaches the written value an
interrupt is generated. Add handling for this interrupt in order to
support PPS events.

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
---
 drivers/net/ethernet/ti/icssg/icss_iep.c | 74 ++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.c b/drivers/net/ethernet/ti/icssg/icss_iep.c
index 3025e9c18970..b076be9c527c 100644
--- a/drivers/net/ethernet/ti/icssg/icss_iep.c
+++ b/drivers/net/ethernet/ti/icssg/icss_iep.c
@@ -17,6 +17,7 @@
 #include <linux/timekeeping.h>
 #include <linux/interrupt.h>
 #include <linux/of_irq.h>
+#include <linux/workqueue.h>
 
 #include "icss_iep.h"
 
@@ -122,6 +123,7 @@ struct icss_iep {
 	int cap_cmp_irq;
 	u64 period;
 	u32 latch_enable;
+	struct work_struct work;
 };
 
 /**
@@ -571,6 +573,57 @@ static int icss_iep_perout_enable(struct icss_iep *iep,
 	return ret;
 }
 
+static void icss_iep_cap_cmp_work(struct work_struct *work)
+{
+	struct icss_iep *iep = container_of(work, struct icss_iep, work);
+	const u32 *reg_offs = iep->plat_data->reg_offs;
+	struct ptp_clock_event pevent;
+	unsigned int val;
+	u64 ns, ns_next;
+
+	spin_lock(&iep->irq_lock);
+
+	ns = readl(iep->base + reg_offs[ICSS_IEP_CMP1_REG0]);
+	if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) {
+		val = readl(iep->base + reg_offs[ICSS_IEP_CMP1_REG1]);
+		ns |= (u64)val << 32;
+	}
+	/* set next event */
+	ns_next = ns + iep->period;
+	writel(lower_32_bits(ns_next),
+	       iep->base + reg_offs[ICSS_IEP_CMP1_REG0]);
+	if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT)
+		writel(upper_32_bits(ns_next),
+		       iep->base + reg_offs[ICSS_IEP_CMP1_REG1]);
+
+	pevent.pps_times.ts_real = ns_to_timespec64(ns);
+	pevent.type = PTP_CLOCK_PPSUSR;
+	pevent.index = 0;
+	ptp_clock_event(iep->ptp_clock, &pevent);
+	dev_dbg(iep->dev, "IEP:pps ts: %llu next:%llu:\n", ns, ns_next);
+
+	spin_unlock(&iep->irq_lock);
+}
+
+static irqreturn_t icss_iep_cap_cmp_irq(int irq, void *dev_id)
+{
+	struct icss_iep *iep = (struct icss_iep *)dev_id;
+	const u32 *reg_offs = iep->plat_data->reg_offs;
+	unsigned int val;
+
+	val = readl(iep->base + reg_offs[ICSS_IEP_CMP_STAT_REG]);
+	/* The driver only enables CMP1 */
+	if (val & BIT(1)) {
+		/* Clear the event */
+		writel(BIT(1), iep->base + reg_offs[ICSS_IEP_CMP_STAT_REG]);
+		if (iep->pps_enabled || iep->perout_enabled)
+			schedule_work(&iep->work);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
 static int icss_iep_pps_enable(struct icss_iep *iep, int on)
 {
 	struct ptp_clock_request rq;
@@ -602,6 +655,8 @@ static int icss_iep_pps_enable(struct icss_iep *iep, int on)
 		ret = icss_iep_perout_enable_hw(iep, &rq.perout, on);
 	} else {
 		ret = icss_iep_perout_enable_hw(iep, &rq.perout, on);
+		if (iep->cap_cmp_irq)
+			cancel_work_sync(&iep->work);
 	}
 
 	if (!ret)
@@ -777,6 +832,8 @@ int icss_iep_init(struct icss_iep *iep, const struct icss_iep_clockops *clkops,
 	if (iep->ops && iep->ops->perout_enable) {
 		iep->ptp_info.n_per_out = 1;
 		iep->ptp_info.pps = 1;
+	} else if (iep->cap_cmp_irq) {
+		iep->ptp_info.pps = 1;
 	}
 
 	if (iep->ops && iep->ops->extts_enable)
@@ -817,6 +874,7 @@ static int icss_iep_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct icss_iep *iep;
 	struct clk *iep_clk;
+	int ret, irq;
 
 	iep = devm_kzalloc(dev, sizeof(*iep), GFP_KERNEL);
 	if (!iep)
@@ -827,6 +885,22 @@ static int icss_iep_probe(struct platform_device *pdev)
 	if (IS_ERR(iep->base))
 		return -ENODEV;
 
+	irq = platform_get_irq_byname_optional(pdev, "iep_cap_cmp");
+	if (irq == -EPROBE_DEFER)
+		return irq;
+
+	if (irq > 0) {
+		ret = devm_request_irq(dev, irq, icss_iep_cap_cmp_irq,
+				       IRQF_TRIGGER_HIGH, "iep_cap_cmp", iep);
+		if (ret) {
+			dev_info(iep->dev, "cap_cmp irq request failed: %x\n",
+				 ret);
+		} else {
+			iep->cap_cmp_irq = irq;
+			INIT_WORK(&iep->work, icss_iep_cap_cmp_work);
+		}
+	}
+
 	iep_clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(iep_clk))
 		return PTR_ERR(iep_clk);

-- 
2.45.2


  parent reply	other threads:[~2024-06-04 13:15 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-04 13:15 [PATCH net-next v2 0/3] Enable PTP timestamping/PPS for AM65x SR1.0 devices Diogo Ivo
2024-06-04 13:15 ` [PATCH net-next v2 1/3] net: ti: icssg-prueth: Enable PTP timestamping support for " Diogo Ivo
2024-06-04 14:19   ` Wojciech Drewek
2024-06-04 13:15 ` Diogo Ivo [this message]
2024-06-04 14:23   ` [PATCH net-next v2 2/3] net: ti: icss-iep: Enable compare events Wojciech Drewek
2024-06-06 10:32   ` Paolo Abeni
2024-06-06 13:28     ` Diogo Ivo
2024-06-06 13:49       ` Paolo Abeni
2024-06-06 15:43         ` Diogo Ivo
2024-06-04 13:15 ` [PATCH net-next v2 3/3] arm64: dts: ti: iot2050: Add IEP interrupts for SR1.0 devices Diogo Ivo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240604-iep-v2-2-ea8e1c0a5686@siemens.com \
    --to=diogo.ivo@siemens.com \
    --cc=conor+dt@kernel.org \
    --cc=danishanwar@ti.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=jacob.e.keller@intel.com \
    --cc=jan.kiszka@siemens.com \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=rogerq@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®