* arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address): /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
@ 2024-06-08 5:37 kernel test robot
2024-06-08 8:42 ` Biju Das
0 siblings, 1 reply; 4+ messages in thread
From: kernel test robot @ 2024-06-08 5:37 UTC (permalink / raw)
To: Biju Das; +Cc: oe-kbuild-all, linux-kernel, Geert Uytterhoeven
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: dc772f8237f9b0c9ea3f34d0dc4a57d1f6a5070d
commit: 971c17f879352adc719ff215e0769f8e0a49d7c4 arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes
date: 4 months ago
compiler: aarch64-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240608/202406081329.snoMrZsJ-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406081329.snoMrZsJ-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
>> arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address): /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
>> arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:120.11-129.6: Warning (graph_child_address): /soc/csi2@10830400/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
vim +85 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
60
61 &soc {
62 interrupt-parent = <&gic>;
63
64 cru: video@10830000 {
65 compatible = "renesas,r9a07g043-cru", "renesas,rzg2l-cru";
66 reg = <0 0x10830000 0 0x400>;
67 clocks = <&cpg CPG_MOD R9A07G043_CRU_VCLK>,
68 <&cpg CPG_MOD R9A07G043_CRU_PCLK>,
69 <&cpg CPG_MOD R9A07G043_CRU_ACLK>;
70 clock-names = "video", "apb", "axi";
71 interrupts = <SOC_PERIPHERAL_IRQ(167) IRQ_TYPE_LEVEL_HIGH>,
72 <SOC_PERIPHERAL_IRQ(168) IRQ_TYPE_LEVEL_HIGH>,
73 <SOC_PERIPHERAL_IRQ(169) IRQ_TYPE_LEVEL_HIGH>;
74 interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
75 resets = <&cpg R9A07G043_CRU_PRESETN>,
76 <&cpg R9A07G043_CRU_ARESETN>;
77 reset-names = "presetn", "aresetn";
78 power-domains = <&cpg>;
79 status = "disabled";
80
81 ports {
82 #address-cells = <1>;
83 #size-cells = <0>;
84
> 85 port@1 {
86 #address-cells = <1>;
87 #size-cells = <0>;
88
89 reg = <1>;
90 crucsi2: endpoint@0 {
91 reg = <0>;
92 remote-endpoint = <&csi2cru>;
93 };
94 };
95 };
96 };
97
98 csi2: csi2@10830400 {
99 compatible = "renesas,r9a07g043-csi2", "renesas,rzg2l-csi2";
100 reg = <0 0x10830400 0 0xfc00>;
101 interrupts = <SOC_PERIPHERAL_IRQ(166) IRQ_TYPE_LEVEL_HIGH>;
102 clocks = <&cpg CPG_MOD R9A07G043_CRU_SYSCLK>,
103 <&cpg CPG_MOD R9A07G043_CRU_VCLK>,
104 <&cpg CPG_MOD R9A07G043_CRU_PCLK>;
105 clock-names = "system", "video", "apb";
106 resets = <&cpg R9A07G043_CRU_PRESETN>,
107 <&cpg R9A07G043_CRU_CMN_RSTB>;
108 reset-names = "presetn", "cmn-rstb";
109 power-domains = <&cpg>;
110 status = "disabled";
111
112 ports {
113 #address-cells = <1>;
114 #size-cells = <0>;
115
116 port@0 {
117 reg = <0>;
118 };
119
> 120 port@1 {
121 #address-cells = <1>;
122 #size-cells = <0>;
123 reg = <1>;
124
125 csi2cru: endpoint@0 {
126 reg = <0>;
127 remote-endpoint = <&crucsi2>;
128 };
129 };
130 };
131 };
132
133 irqc: interrupt-controller@110a0000 {
134 compatible = "renesas,r9a07g043u-irqc",
135 "renesas,rzg2l-irqc";
136 reg = <0 0x110a0000 0 0x10000>;
137 #interrupt-cells = <2>;
138 #address-cells = <0>;
139 interrupt-controller;
140 interrupts = <SOC_PERIPHERAL_IRQ(0) IRQ_TYPE_LEVEL_HIGH>,
141 <SOC_PERIPHERAL_IRQ(1) IRQ_TYPE_LEVEL_HIGH>,
142 <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>,
143 <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>,
144 <SOC_PERIPHERAL_IRQ(4) IRQ_TYPE_LEVEL_HIGH>,
145 <SOC_PERIPHERAL_IRQ(5) IRQ_TYPE_LEVEL_HIGH>,
146 <SOC_PERIPHERAL_IRQ(6) IRQ_TYPE_LEVEL_HIGH>,
147 <SOC_PERIPHERAL_IRQ(7) IRQ_TYPE_LEVEL_HIGH>,
148 <SOC_PERIPHERAL_IRQ(8) IRQ_TYPE_LEVEL_HIGH>,
149 <SOC_PERIPHERAL_IRQ(444) IRQ_TYPE_LEVEL_HIGH>,
150 <SOC_PERIPHERAL_IRQ(445) IRQ_TYPE_LEVEL_HIGH>,
151 <SOC_PERIPHERAL_IRQ(446) IRQ_TYPE_LEVEL_HIGH>,
152 <SOC_PERIPHERAL_IRQ(447) IRQ_TYPE_LEVEL_HIGH>,
153 <SOC_PERIPHERAL_IRQ(448) IRQ_TYPE_LEVEL_HIGH>,
154 <SOC_PERIPHERAL_IRQ(449) IRQ_TYPE_LEVEL_HIGH>,
155 <SOC_PERIPHERAL_IRQ(450) IRQ_TYPE_LEVEL_HIGH>,
156 <SOC_PERIPHERAL_IRQ(451) IRQ_TYPE_LEVEL_HIGH>,
157 <SOC_PERIPHERAL_IRQ(452) IRQ_TYPE_LEVEL_HIGH>,
158 <SOC_PERIPHERAL_IRQ(453) IRQ_TYPE_LEVEL_HIGH>,
159 <SOC_PERIPHERAL_IRQ(454) IRQ_TYPE_LEVEL_HIGH>,
160 <SOC_PERIPHERAL_IRQ(455) IRQ_TYPE_LEVEL_HIGH>,
161 <SOC_PERIPHERAL_IRQ(456) IRQ_TYPE_LEVEL_HIGH>,
162 <SOC_PERIPHERAL_IRQ(457) IRQ_TYPE_LEVEL_HIGH>,
163 <SOC_PERIPHERAL_IRQ(458) IRQ_TYPE_LEVEL_HIGH>,
164 <SOC_PERIPHERAL_IRQ(459) IRQ_TYPE_LEVEL_HIGH>,
165 <SOC_PERIPHERAL_IRQ(460) IRQ_TYPE_LEVEL_HIGH>,
166 <SOC_PERIPHERAL_IRQ(461) IRQ_TYPE_LEVEL_HIGH>,
167 <SOC_PERIPHERAL_IRQ(462) IRQ_TYPE_LEVEL_HIGH>,
168 <SOC_PERIPHERAL_IRQ(463) IRQ_TYPE_LEVEL_HIGH>,
169 <SOC_PERIPHERAL_IRQ(464) IRQ_TYPE_LEVEL_HIGH>,
170 <SOC_PERIPHERAL_IRQ(465) IRQ_TYPE_LEVEL_HIGH>,
171 <SOC_PERIPHERAL_IRQ(466) IRQ_TYPE_LEVEL_HIGH>,
172 <SOC_PERIPHERAL_IRQ(467) IRQ_TYPE_LEVEL_HIGH>,
173 <SOC_PERIPHERAL_IRQ(468) IRQ_TYPE_LEVEL_HIGH>,
174 <SOC_PERIPHERAL_IRQ(469) IRQ_TYPE_LEVEL_HIGH>,
175 <SOC_PERIPHERAL_IRQ(470) IRQ_TYPE_LEVEL_HIGH>,
176 <SOC_PERIPHERAL_IRQ(471) IRQ_TYPE_LEVEL_HIGH>,
177 <SOC_PERIPHERAL_IRQ(472) IRQ_TYPE_LEVEL_HIGH>,
178 <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>,
179 <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>,
180 <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>,
181 <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>;
182 interrupt-names = "nmi",
183 "irq0", "irq1", "irq2", "irq3",
184 "irq4", "irq5", "irq6", "irq7",
185 "tint0", "tint1", "tint2", "tint3",
186 "tint4", "tint5", "tint6", "tint7",
187 "tint8", "tint9", "tint10", "tint11",
188 "tint12", "tint13", "tint14", "tint15",
189 "tint16", "tint17", "tint18", "tint19",
190 "tint20", "tint21", "tint22", "tint23",
191 "tint24", "tint25", "tint26", "tint27",
192 "tint28", "tint29", "tint30", "tint31",
193 "bus-err";
194 clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>,
195 <&cpg CPG_MOD R9A07G043_IA55_PCLK>;
196 clock-names = "clk", "pclk";
197 power-domains = <&cpg>;
198 resets = <&cpg R9A07G043_IA55_RESETN>;
199 };
200
201 gic: interrupt-controller@11900000 {
202 compatible = "arm,gic-v3";
203 #interrupt-cells = <3>;
204 #address-cells = <0>;
205 interrupt-controller;
206 reg = <0x0 0x11900000 0 0x40000>,
207 <0x0 0x11940000 0 0x60000>;
208 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
209 };
210 };
211
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address): /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
2024-06-08 5:37 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address): /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary kernel test robot
@ 2024-06-08 8:42 ` Biju Das
2024-06-09 5:19 ` Philip Li
0 siblings, 1 reply; 4+ messages in thread
From: Biju Das @ 2024-06-08 8:42 UTC (permalink / raw)
To: kernel test robot; +Cc: oe-kbuild-all, linux-kernel, Geert Uytterhoeven
Hi All,
> -----Original Message-----
> From: kernel test robot <lkp@intel.com>
> Sent: Saturday, June 8, 2024 6:37 AM
> To: Biju Das <biju.das.jz@bp.renesas.com>
> Cc: oe-kbuild-all@lists.linux.dev; linux-kernel@vger.kernel.org; Geert Uytterhoeven
> <geert+renesas@glider.be>
> Subject: arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address):
> /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-
> cells/#size-cells are not necessary
>
> tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> head: dc772f8237f9b0c9ea3f34d0dc4a57d1f6a5070d
> commit: 971c17f879352adc719ff215e0769f8e0a49d7c4 arm64: dts: renesas: r9a07g043u: Add CSI and CRU
> nodes
> date: 4 months ago
> compiler: aarch64-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build):
> (https://download.01.org/0day-ci/archive/20240608/202406081329.snoMrZsJ-lkp@intel.com/reproduce)
As per this,
dasb@ree-du1sdd5:~/lkp-tests$ mkdir build_dir && cp config build_dir/.config
cp: cannot stat 'config': No such file or directory
So I have generated .config and copied as config
Than I got the the below issue,
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-13.2.0 ~/lkp-tests/kbuild/make.cross W=1 O=build_dir ARCH=arm64 olddefconfig
-bash: /data/dasb/lkp-tests/kbuild/make.cross: No such file or directory
Can you please provide the details how to get this tool chain?
So that I can reproduce and fix the issue in same environment.
Cheers,
Biju
>
> If you fix the issue in a separate patch/commit (i.e. not just a new version of the same
> patch/commit), kindly add following tags
> | Reported-by: kernel test robot <lkp@intel.com>
> | Closes:
> | https://lore.kernel.org/oe-kbuild-all/202406081329.snoMrZsJ-lkp@intel.
> | com/
>
> dtcheck warnings: (new ones prefixed by >>)
> >> arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning
> >> (graph_child_address): /soc/video@10830000/ports/port@1: graph node
> >> has single child node 'endpoint@0', #address-cells/#size-cells are
> >> not necessary
> >> arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:120.11-129.6: Warning
> >> (graph_child_address): /soc/csi2@10830400/ports/port@1: graph node
> >> has single child node 'endpoint@0', #address-cells/#size-cells are
> >> not necessary
>
> vim +85 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
>
> 60
> 61 &soc {
> 62 interrupt-parent = <&gic>;
> 63
> 64 cru: video@10830000 {
> 65 compatible = "renesas,r9a07g043-cru", "renesas,rzg2l-cru";
> 66 reg = <0 0x10830000 0 0x400>;
> 67 clocks = <&cpg CPG_MOD R9A07G043_CRU_VCLK>,
> 68 <&cpg CPG_MOD R9A07G043_CRU_PCLK>,
> 69 <&cpg CPG_MOD R9A07G043_CRU_ACLK>;
> 70 clock-names = "video", "apb", "axi";
> 71 interrupts = <SOC_PERIPHERAL_IRQ(167) IRQ_TYPE_LEVEL_HIGH>,
> 72 <SOC_PERIPHERAL_IRQ(168) IRQ_TYPE_LEVEL_HIGH>,
> 73 <SOC_PERIPHERAL_IRQ(169) IRQ_TYPE_LEVEL_HIGH>;
> 74 interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
> 75 resets = <&cpg R9A07G043_CRU_PRESETN>,
> 76 <&cpg R9A07G043_CRU_ARESETN>;
> 77 reset-names = "presetn", "aresetn";
> 78 power-domains = <&cpg>;
> 79 status = "disabled";
> 80
> 81 ports {
> 82 #address-cells = <1>;
> 83 #size-cells = <0>;
> 84
> > 85 port@1 {
> 86 #address-cells = <1>;
> 87 #size-cells = <0>;
> 88
> 89 reg = <1>;
> 90 crucsi2: endpoint@0 {
> 91 reg = <0>;
> 92 remote-endpoint = <&csi2cru>;
> 93 };
> 94 };
> 95 };
> 96 };
> 97
> 98 csi2: csi2@10830400 {
> 99 compatible = "renesas,r9a07g043-csi2", "renesas,rzg2l-csi2";
> 100 reg = <0 0x10830400 0 0xfc00>;
> 101 interrupts = <SOC_PERIPHERAL_IRQ(166) IRQ_TYPE_LEVEL_HIGH>;
> 102 clocks = <&cpg CPG_MOD R9A07G043_CRU_SYSCLK>,
> 103 <&cpg CPG_MOD R9A07G043_CRU_VCLK>,
> 104 <&cpg CPG_MOD R9A07G043_CRU_PCLK>;
> 105 clock-names = "system", "video", "apb";
> 106 resets = <&cpg R9A07G043_CRU_PRESETN>,
> 107 <&cpg R9A07G043_CRU_CMN_RSTB>;
> 108 reset-names = "presetn", "cmn-rstb";
> 109 power-domains = <&cpg>;
> 110 status = "disabled";
> 111
> 112 ports {
> 113 #address-cells = <1>;
> 114 #size-cells = <0>;
> 115
> 116 port@0 {
> 117 reg = <0>;
> 118 };
> 119
> > 120 port@1 {
> 121 #address-cells = <1>;
> 122 #size-cells = <0>;
> 123 reg = <1>;
> 124
> 125 csi2cru: endpoint@0 {
> 126 reg = <0>;
> 127 remote-endpoint = <&crucsi2>;
> 128 };
> 129 };
> 130 };
> 131 };
> 132
> 133 irqc: interrupt-controller@110a0000 {
> 134 compatible = "renesas,r9a07g043u-irqc",
> 135 "renesas,rzg2l-irqc";
> 136 reg = <0 0x110a0000 0 0x10000>;
> 137 #interrupt-cells = <2>;
> 138 #address-cells = <0>;
> 139 interrupt-controller;
> 140 interrupts = <SOC_PERIPHERAL_IRQ(0) IRQ_TYPE_LEVEL_HIGH>,
> 141 <SOC_PERIPHERAL_IRQ(1) IRQ_TYPE_LEVEL_HIGH>,
> 142 <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>,
> 143 <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>,
> 144 <SOC_PERIPHERAL_IRQ(4) IRQ_TYPE_LEVEL_HIGH>,
> 145 <SOC_PERIPHERAL_IRQ(5) IRQ_TYPE_LEVEL_HIGH>,
> 146 <SOC_PERIPHERAL_IRQ(6) IRQ_TYPE_LEVEL_HIGH>,
> 147 <SOC_PERIPHERAL_IRQ(7) IRQ_TYPE_LEVEL_HIGH>,
> 148 <SOC_PERIPHERAL_IRQ(8) IRQ_TYPE_LEVEL_HIGH>,
> 149 <SOC_PERIPHERAL_IRQ(444) IRQ_TYPE_LEVEL_HIGH>,
> 150 <SOC_PERIPHERAL_IRQ(445) IRQ_TYPE_LEVEL_HIGH>,
> 151 <SOC_PERIPHERAL_IRQ(446) IRQ_TYPE_LEVEL_HIGH>,
> 152 <SOC_PERIPHERAL_IRQ(447) IRQ_TYPE_LEVEL_HIGH>,
> 153 <SOC_PERIPHERAL_IRQ(448) IRQ_TYPE_LEVEL_HIGH>,
> 154 <SOC_PERIPHERAL_IRQ(449) IRQ_TYPE_LEVEL_HIGH>,
> 155 <SOC_PERIPHERAL_IRQ(450) IRQ_TYPE_LEVEL_HIGH>,
> 156 <SOC_PERIPHERAL_IRQ(451) IRQ_TYPE_LEVEL_HIGH>,
> 157 <SOC_PERIPHERAL_IRQ(452) IRQ_TYPE_LEVEL_HIGH>,
> 158 <SOC_PERIPHERAL_IRQ(453) IRQ_TYPE_LEVEL_HIGH>,
> 159 <SOC_PERIPHERAL_IRQ(454) IRQ_TYPE_LEVEL_HIGH>,
> 160 <SOC_PERIPHERAL_IRQ(455) IRQ_TYPE_LEVEL_HIGH>,
> 161 <SOC_PERIPHERAL_IRQ(456) IRQ_TYPE_LEVEL_HIGH>,
> 162 <SOC_PERIPHERAL_IRQ(457) IRQ_TYPE_LEVEL_HIGH>,
> 163 <SOC_PERIPHERAL_IRQ(458) IRQ_TYPE_LEVEL_HIGH>,
> 164 <SOC_PERIPHERAL_IRQ(459) IRQ_TYPE_LEVEL_HIGH>,
> 165 <SOC_PERIPHERAL_IRQ(460) IRQ_TYPE_LEVEL_HIGH>,
> 166 <SOC_PERIPHERAL_IRQ(461) IRQ_TYPE_LEVEL_HIGH>,
> 167 <SOC_PERIPHERAL_IRQ(462) IRQ_TYPE_LEVEL_HIGH>,
> 168 <SOC_PERIPHERAL_IRQ(463) IRQ_TYPE_LEVEL_HIGH>,
> 169 <SOC_PERIPHERAL_IRQ(464) IRQ_TYPE_LEVEL_HIGH>,
> 170 <SOC_PERIPHERAL_IRQ(465) IRQ_TYPE_LEVEL_HIGH>,
> 171 <SOC_PERIPHERAL_IRQ(466) IRQ_TYPE_LEVEL_HIGH>,
> 172 <SOC_PERIPHERAL_IRQ(467) IRQ_TYPE_LEVEL_HIGH>,
> 173 <SOC_PERIPHERAL_IRQ(468) IRQ_TYPE_LEVEL_HIGH>,
> 174 <SOC_PERIPHERAL_IRQ(469) IRQ_TYPE_LEVEL_HIGH>,
> 175 <SOC_PERIPHERAL_IRQ(470) IRQ_TYPE_LEVEL_HIGH>,
> 176 <SOC_PERIPHERAL_IRQ(471) IRQ_TYPE_LEVEL_HIGH>,
> 177 <SOC_PERIPHERAL_IRQ(472) IRQ_TYPE_LEVEL_HIGH>,
> 178 <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>,
> 179 <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>,
> 180 <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>,
> 181 <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>;
> 182 interrupt-names = "nmi",
> 183 "irq0", "irq1", "irq2", "irq3",
> 184 "irq4", "irq5", "irq6", "irq7",
> 185 "tint0", "tint1", "tint2", "tint3",
> 186 "tint4", "tint5", "tint6", "tint7",
> 187 "tint8", "tint9", "tint10", "tint11",
> 188 "tint12", "tint13", "tint14", "tint15",
> 189 "tint16", "tint17", "tint18", "tint19",
> 190 "tint20", "tint21", "tint22", "tint23",
> 191 "tint24", "tint25", "tint26", "tint27",
> 192 "tint28", "tint29", "tint30", "tint31",
> 193 "bus-err";
> 194 clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>,
> 195 <&cpg CPG_MOD R9A07G043_IA55_PCLK>;
> 196 clock-names = "clk", "pclk";
> 197 power-domains = <&cpg>;
> 198 resets = <&cpg R9A07G043_IA55_RESETN>;
> 199 };
> 200
> 201 gic: interrupt-controller@11900000 {
> 202 compatible = "arm,gic-v3";
> 203 #interrupt-cells = <3>;
> 204 #address-cells = <0>;
> 205 interrupt-controller;
> 206 reg = <0x0 0x11900000 0 0x40000>,
> 207 <0x0 0x11940000 0 0x60000>;
> 208 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> 209 };
> 210 };
> 211
>
> --
> 0-DAY CI Kernel Test Service
> https://github.com/intel/lkp-tests/wiki
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address): /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
2024-06-08 8:42 ` Biju Das
@ 2024-06-09 5:19 ` Philip Li
2024-06-09 9:16 ` Biju Das
0 siblings, 1 reply; 4+ messages in thread
From: Philip Li @ 2024-06-09 5:19 UTC (permalink / raw)
To: Biju Das
Cc: kernel test robot, oe-kbuild-all, linux-kernel, Geert Uytterhoeven
On Sat, Jun 08, 2024 at 08:42:56AM +0000, Biju Das wrote:
> Hi All,
>
> > -----Original Message-----
> > From: kernel test robot <lkp@intel.com>
> > Sent: Saturday, June 8, 2024 6:37 AM
> > To: Biju Das <biju.das.jz@bp.renesas.com>
> > Cc: oe-kbuild-all@lists.linux.dev; linux-kernel@vger.kernel.org; Geert Uytterhoeven
> > <geert+renesas@glider.be>
> > Subject: arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address):
> > /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-
> > cells/#size-cells are not necessary
> >
> > tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > head: dc772f8237f9b0c9ea3f34d0dc4a57d1f6a5070d
> > commit: 971c17f879352adc719ff215e0769f8e0a49d7c4 arm64: dts: renesas: r9a07g043u: Add CSI and CRU
> > nodes
> > date: 4 months ago
> > compiler: aarch64-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build):
> > (https://download.01.org/0day-ci/archive/20240608/202406081329.snoMrZsJ-lkp@intel.com/reproduce)
>
> As per this,
> dasb@ree-du1sdd5:~/lkp-tests$ mkdir build_dir && cp config build_dir/.config
> cp: cannot stat 'config': No such file or directory
sorry, looks this is confusing to "cp config build_dir/.config" as there's no .config
for this case. We will fix the reproduce step.
>
> So I have generated .config and copied as config
>
> Than I got the the below issue,
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-13.2.0 ~/lkp-tests/kbuild/make.cross W=1 O=build_dir ARCH=arm64 olddefconfig
> -bash: /data/dasb/lkp-tests/kbuild/make.cross: No such file or directory
Is it possible the lkp-tests is not up to date? the make.cross code was uploaded
recently.
>
> Can you please provide the details how to get this tool chain?
>
> So that I can reproduce and fix the issue in same environment.
You can try below steps (without the cp .config)
$ mkdir build_dir
$ COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-13.2.0 ~/lkp-tests/kbuild/make.cross W=1 O=build_dir ARCH=arm64 olddefconfig
$ COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-13.2.0 ~/lkp-tests/kbuild/make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash
Or you can ignore the full make, just do below after make olddefconfig
$ COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-13.2.0 ~/lkp-tests/kbuild/make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash dtbs_check
e.g.
$ COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-13.2.0 ~/upstream/lkp-tests/kbuild/make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash dtbs_check 2>&1 | grep 'arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6'
../arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address): /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
Thanks
>
> Cheers,
> Biju
>
> >
> > If you fix the issue in a separate patch/commit (i.e. not just a new version of the same
> > patch/commit), kindly add following tags
> > | Reported-by: kernel test robot <lkp@intel.com>
> > | Closes:
> > | https://lore.kernel.org/oe-kbuild-all/202406081329.snoMrZsJ-lkp@intel.
> > | com/
> >
> > dtcheck warnings: (new ones prefixed by >>)
> > >> arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning
> > >> (graph_child_address): /soc/video@10830000/ports/port@1: graph node
> > >> has single child node 'endpoint@0', #address-cells/#size-cells are
> > >> not necessary
> > >> arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:120.11-129.6: Warning
> > >> (graph_child_address): /soc/csi2@10830400/ports/port@1: graph node
> > >> has single child node 'endpoint@0', #address-cells/#size-cells are
> > >> not necessary
> >
> > vim +85 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
> >
> > 60
> > 61 &soc {
> > 62 interrupt-parent = <&gic>;
> > 63
> > 64 cru: video@10830000 {
> > 65 compatible = "renesas,r9a07g043-cru", "renesas,rzg2l-cru";
> > 66 reg = <0 0x10830000 0 0x400>;
> > 67 clocks = <&cpg CPG_MOD R9A07G043_CRU_VCLK>,
> > 68 <&cpg CPG_MOD R9A07G043_CRU_PCLK>,
> > 69 <&cpg CPG_MOD R9A07G043_CRU_ACLK>;
> > 70 clock-names = "video", "apb", "axi";
> > 71 interrupts = <SOC_PERIPHERAL_IRQ(167) IRQ_TYPE_LEVEL_HIGH>,
> > 72 <SOC_PERIPHERAL_IRQ(168) IRQ_TYPE_LEVEL_HIGH>,
> > 73 <SOC_PERIPHERAL_IRQ(169) IRQ_TYPE_LEVEL_HIGH>;
> > 74 interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
> > 75 resets = <&cpg R9A07G043_CRU_PRESETN>,
> > 76 <&cpg R9A07G043_CRU_ARESETN>;
> > 77 reset-names = "presetn", "aresetn";
> > 78 power-domains = <&cpg>;
> > 79 status = "disabled";
> > 80
> > 81 ports {
> > 82 #address-cells = <1>;
> > 83 #size-cells = <0>;
> > 84
> > > 85 port@1 {
> > 86 #address-cells = <1>;
> > 87 #size-cells = <0>;
> > 88
> > 89 reg = <1>;
> > 90 crucsi2: endpoint@0 {
> > 91 reg = <0>;
> > 92 remote-endpoint = <&csi2cru>;
> > 93 };
> > 94 };
> > 95 };
> > 96 };
> > 97
> > 98 csi2: csi2@10830400 {
> > 99 compatible = "renesas,r9a07g043-csi2", "renesas,rzg2l-csi2";
> > 100 reg = <0 0x10830400 0 0xfc00>;
> > 101 interrupts = <SOC_PERIPHERAL_IRQ(166) IRQ_TYPE_LEVEL_HIGH>;
> > 102 clocks = <&cpg CPG_MOD R9A07G043_CRU_SYSCLK>,
> > 103 <&cpg CPG_MOD R9A07G043_CRU_VCLK>,
> > 104 <&cpg CPG_MOD R9A07G043_CRU_PCLK>;
> > 105 clock-names = "system", "video", "apb";
> > 106 resets = <&cpg R9A07G043_CRU_PRESETN>,
> > 107 <&cpg R9A07G043_CRU_CMN_RSTB>;
> > 108 reset-names = "presetn", "cmn-rstb";
> > 109 power-domains = <&cpg>;
> > 110 status = "disabled";
> > 111
> > 112 ports {
> > 113 #address-cells = <1>;
> > 114 #size-cells = <0>;
> > 115
> > 116 port@0 {
> > 117 reg = <0>;
> > 118 };
> > 119
> > > 120 port@1 {
> > 121 #address-cells = <1>;
> > 122 #size-cells = <0>;
> > 123 reg = <1>;
> > 124
> > 125 csi2cru: endpoint@0 {
> > 126 reg = <0>;
> > 127 remote-endpoint = <&crucsi2>;
> > 128 };
> > 129 };
> > 130 };
> > 131 };
> > 132
> > 133 irqc: interrupt-controller@110a0000 {
> > 134 compatible = "renesas,r9a07g043u-irqc",
> > 135 "renesas,rzg2l-irqc";
> > 136 reg = <0 0x110a0000 0 0x10000>;
> > 137 #interrupt-cells = <2>;
> > 138 #address-cells = <0>;
> > 139 interrupt-controller;
> > 140 interrupts = <SOC_PERIPHERAL_IRQ(0) IRQ_TYPE_LEVEL_HIGH>,
> > 141 <SOC_PERIPHERAL_IRQ(1) IRQ_TYPE_LEVEL_HIGH>,
> > 142 <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>,
> > 143 <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>,
> > 144 <SOC_PERIPHERAL_IRQ(4) IRQ_TYPE_LEVEL_HIGH>,
> > 145 <SOC_PERIPHERAL_IRQ(5) IRQ_TYPE_LEVEL_HIGH>,
> > 146 <SOC_PERIPHERAL_IRQ(6) IRQ_TYPE_LEVEL_HIGH>,
> > 147 <SOC_PERIPHERAL_IRQ(7) IRQ_TYPE_LEVEL_HIGH>,
> > 148 <SOC_PERIPHERAL_IRQ(8) IRQ_TYPE_LEVEL_HIGH>,
> > 149 <SOC_PERIPHERAL_IRQ(444) IRQ_TYPE_LEVEL_HIGH>,
> > 150 <SOC_PERIPHERAL_IRQ(445) IRQ_TYPE_LEVEL_HIGH>,
> > 151 <SOC_PERIPHERAL_IRQ(446) IRQ_TYPE_LEVEL_HIGH>,
> > 152 <SOC_PERIPHERAL_IRQ(447) IRQ_TYPE_LEVEL_HIGH>,
> > 153 <SOC_PERIPHERAL_IRQ(448) IRQ_TYPE_LEVEL_HIGH>,
> > 154 <SOC_PERIPHERAL_IRQ(449) IRQ_TYPE_LEVEL_HIGH>,
> > 155 <SOC_PERIPHERAL_IRQ(450) IRQ_TYPE_LEVEL_HIGH>,
> > 156 <SOC_PERIPHERAL_IRQ(451) IRQ_TYPE_LEVEL_HIGH>,
> > 157 <SOC_PERIPHERAL_IRQ(452) IRQ_TYPE_LEVEL_HIGH>,
> > 158 <SOC_PERIPHERAL_IRQ(453) IRQ_TYPE_LEVEL_HIGH>,
> > 159 <SOC_PERIPHERAL_IRQ(454) IRQ_TYPE_LEVEL_HIGH>,
> > 160 <SOC_PERIPHERAL_IRQ(455) IRQ_TYPE_LEVEL_HIGH>,
> > 161 <SOC_PERIPHERAL_IRQ(456) IRQ_TYPE_LEVEL_HIGH>,
> > 162 <SOC_PERIPHERAL_IRQ(457) IRQ_TYPE_LEVEL_HIGH>,
> > 163 <SOC_PERIPHERAL_IRQ(458) IRQ_TYPE_LEVEL_HIGH>,
> > 164 <SOC_PERIPHERAL_IRQ(459) IRQ_TYPE_LEVEL_HIGH>,
> > 165 <SOC_PERIPHERAL_IRQ(460) IRQ_TYPE_LEVEL_HIGH>,
> > 166 <SOC_PERIPHERAL_IRQ(461) IRQ_TYPE_LEVEL_HIGH>,
> > 167 <SOC_PERIPHERAL_IRQ(462) IRQ_TYPE_LEVEL_HIGH>,
> > 168 <SOC_PERIPHERAL_IRQ(463) IRQ_TYPE_LEVEL_HIGH>,
> > 169 <SOC_PERIPHERAL_IRQ(464) IRQ_TYPE_LEVEL_HIGH>,
> > 170 <SOC_PERIPHERAL_IRQ(465) IRQ_TYPE_LEVEL_HIGH>,
> > 171 <SOC_PERIPHERAL_IRQ(466) IRQ_TYPE_LEVEL_HIGH>,
> > 172 <SOC_PERIPHERAL_IRQ(467) IRQ_TYPE_LEVEL_HIGH>,
> > 173 <SOC_PERIPHERAL_IRQ(468) IRQ_TYPE_LEVEL_HIGH>,
> > 174 <SOC_PERIPHERAL_IRQ(469) IRQ_TYPE_LEVEL_HIGH>,
> > 175 <SOC_PERIPHERAL_IRQ(470) IRQ_TYPE_LEVEL_HIGH>,
> > 176 <SOC_PERIPHERAL_IRQ(471) IRQ_TYPE_LEVEL_HIGH>,
> > 177 <SOC_PERIPHERAL_IRQ(472) IRQ_TYPE_LEVEL_HIGH>,
> > 178 <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>,
> > 179 <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>,
> > 180 <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>,
> > 181 <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>;
> > 182 interrupt-names = "nmi",
> > 183 "irq0", "irq1", "irq2", "irq3",
> > 184 "irq4", "irq5", "irq6", "irq7",
> > 185 "tint0", "tint1", "tint2", "tint3",
> > 186 "tint4", "tint5", "tint6", "tint7",
> > 187 "tint8", "tint9", "tint10", "tint11",
> > 188 "tint12", "tint13", "tint14", "tint15",
> > 189 "tint16", "tint17", "tint18", "tint19",
> > 190 "tint20", "tint21", "tint22", "tint23",
> > 191 "tint24", "tint25", "tint26", "tint27",
> > 192 "tint28", "tint29", "tint30", "tint31",
> > 193 "bus-err";
> > 194 clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>,
> > 195 <&cpg CPG_MOD R9A07G043_IA55_PCLK>;
> > 196 clock-names = "clk", "pclk";
> > 197 power-domains = <&cpg>;
> > 198 resets = <&cpg R9A07G043_IA55_RESETN>;
> > 199 };
> > 200
> > 201 gic: interrupt-controller@11900000 {
> > 202 compatible = "arm,gic-v3";
> > 203 #interrupt-cells = <3>;
> > 204 #address-cells = <0>;
> > 205 interrupt-controller;
> > 206 reg = <0x0 0x11900000 0 0x40000>,
> > 207 <0x0 0x11940000 0 0x60000>;
> > 208 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> > 209 };
> > 210 };
> > 211
> >
> > --
> > 0-DAY CI Kernel Test Service
> > https://github.com/intel/lkp-tests/wiki
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address): /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
2024-06-09 5:19 ` Philip Li
@ 2024-06-09 9:16 ` Biju Das
0 siblings, 0 replies; 4+ messages in thread
From: Biju Das @ 2024-06-09 9:16 UTC (permalink / raw)
To: Philip Li
Cc: kernel test robot, oe-kbuild-all, linux-kernel, Geert Uytterhoeven
Hi Philip Li,
Thanks for the feedback.
> -----Original Message-----
> From: Philip Li <philip.li@intel.com>
> Sent: Sunday, June 9, 2024 6:20 AM
> Subject: Re: arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address):
> /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-
> cells/#size-cells are not necessary
>
> On Sat, Jun 08, 2024 at 08:42:56AM +0000, Biju Das wrote:
> > Hi All,
> >
> > > -----Original Message-----
> > > From: kernel test robot <lkp@intel.com>
> > > Sent: Saturday, June 8, 2024 6:37 AM
> > > To: Biju Das <biju.das.jz@bp.renesas.com>
> > > Cc: oe-kbuild-all@lists.linux.dev; linux-kernel@vger.kernel.org;
> > > Geert Uytterhoeven <geert+renesas@glider.be>
> > > Subject: arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address):
> > > /soc/video@10830000/ports/port@1: graph node has single child node
> > > 'endpoint@0', #address- cells/#size-cells are not necessary
> > >
> > > tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > > head: dc772f8237f9b0c9ea3f34d0dc4a57d1f6a5070d
> > > commit: 971c17f879352adc719ff215e0769f8e0a49d7c4 arm64: dts:
> > > renesas: r9a07g043u: Add CSI and CRU nodes
> > > date: 4 months ago
> > > compiler: aarch64-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build):
> > > (https://download.01.org/0day-ci/archive/20240608/202406081329.snoMr
> > > ZsJ-lkp@intel.com/reproduce)
> >
> > As per this,
> > dasb@ree-du1sdd5:~/lkp-tests$ mkdir build_dir && cp config
> > build_dir/.config
> > cp: cannot stat 'config': No such file or directory
>
> sorry, looks this is confusing to "cp config build_dir/.config" as there's no .config for this
> case. We will fix the reproduce step.
OK.
>
> >
> > So I have generated .config and copied as config
> >
> > Than I got the the below issue,
> > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-13.2.0
> > ~/lkp-tests/kbuild/make.cross W=1 O=build_dir ARCH=arm64 olddefconfig
> > -bash: /data/dasb/lkp-tests/kbuild/make.cross: No such file or
> > directory
>
> Is it possible the lkp-tests is not up to date? the make.cross code was uploaded recently.
Yes, lkp-tests are not up to date with the master branch with respect to branch created using steps to reproduce
instruction.
So manually copied the below files from master branch.
cp ~/lkp-tests/kbuild/make.cross_bk ~/lkp-tests/kbuild/make.cross
cp /data/dasb/lkp-tests/kbuild/kbuild.sh_bk /data/dasb/lkp-tests/kbuild/kbuild.shs
cp -rf /data/dasb/lkp-tests/kbuild-bk/etc/ /data/dasb/lkp-tests/kbuild/
>
> >
> > Can you please provide the details how to get this tool chain?
> >
> > So that I can reproduce and fix the issue in same environment.
>
> You can try below steps (without the cp .config)
>
> $ mkdir build_dir
> $ COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-13.2.0 ~/lkp-tests/kbuild/make.cross W=1
> O=build_dir ARCH=arm64 olddefconfig $ COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-13.2.0 ~/lkp-
> tests/kbuild/make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash
I can reproduce the issue now with lkp-tests environment
../arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address): /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
../arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:120.11-129.6: Warning (graph_child_address): /soc/csi2@10830400/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
Cheers,
Biju
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-06-09 9:16 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-06-08 5:37 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi:85.11-94.6: Warning (graph_child_address): /soc/video@10830000/ports/port@1: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary kernel test robot
2024-06-08 8:42 ` Biju Das
2024-06-09 5:19 ` Philip Li
2024-06-09 9:16 ` Biju Das
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®