From: Danila Tikhonov <danila@jiaxyga.com>
To: robdclark@gmail.com, quic_abhinavk@quicinc.com,
dmitry.baryshkov@linaro.org, sean@poorly.run,
marijn.suijten@somainline.org, maarten.lankhorst@linux.intel.com,
mripard@kernel.org, tzimmermann@suse.de, airlied@gmail.com,
daniel@ffwll.ch, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, quic_rmccann@quicinc.com,
konrad.dybcio@linaro.org, neil.armstrong@linaro.org,
jonathan@marek.ca, swboyd@chromium.org, quic_khsieh@quicinc.com,
quic_jesszhan@quicinc.com
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Danila Tikhonov <danila@jiaxyga.com>
Subject: [PATCH 4/4] drm/msm/dpu: Add SM7150 support
Date: Wed, 12 Jun 2024 01:37:43 +0300 [thread overview]
Message-ID: <20240611223743.113223-5-danila@jiaxyga.com> (raw)
In-Reply-To: <20240611223743.113223-1-danila@jiaxyga.com>
Add definitions for the display hardware used on the Qualcomm SM7150
platform.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
---
.../msm/disp/dpu1/catalog/dpu_5_2_sm7150.h | 349 ++++++++++++++++++
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 1 +
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
4 files changed, 352 insertions(+)
create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_2_sm7150.h
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_2_sm7150.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_2_sm7150.h
new file mode 100644
index 0000000000000..4d50814edcffd
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_2_sm7150.h
@@ -0,0 +1,349 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com>
+ */
+
+#ifndef _DPU_5_2_SM7150_H
+#define _DPU_5_2_SM7150_H
+
+static const struct dpu_caps sm7150_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0xb,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .has_3d_merge = true,
+ .max_linewidth = 2880,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+ .max_hdeci_exp = MAX_HORZ_DECIMATION,
+ .max_vdeci_exp = MAX_VERT_DECIMATION,
+};
+
+static const struct dpu_mdp_cfg sm7150_mdp = {
+ .name = "top_0",
+ .base = 0x0, .len = 0x45c,
+ .features = BIT(DPU_MDP_AUDIO_SELECT),
+ .clk_ctrls = {
+ [DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
+ [DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
+ [DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
+ [DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
+ [DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2bc, .bit_off = 8 },
+ [DPU_CLK_CTRL_WB2] = { .reg_off = 0x2bc, .bit_off = 16 },
+ },
+};
+
+static const struct dpu_ctl_cfg sm7150_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x1000, .len = 0x1e0,
+ .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+ }, {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x1200, .len = 0x1e0,
+ .features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_SPLIT_DISPLAY),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+ }, {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x1400, .len = 0x1e0,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+ }, {
+ .name = "ctl_3", .id = CTL_3,
+ .base = 0x1600, .len = 0x1e0,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+ }, {
+ .name = "ctl_4", .id = CTL_4,
+ .base = 0x1800, .len = 0x1e0,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+ }, {
+ .name = "ctl_5", .id = CTL_5,
+ .base = 0x1a00, .len = 0x1e0,
+ .features = BIT(DPU_CTL_ACTIVE_CFG),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+ },
+};
+
+static const struct dpu_sspp_cfg sm7150_sspp[] = {
+ {
+ .name = "sspp_0", .id = SSPP_VIG0,
+ .base = 0x4000, .len = 0x1f0,
+ .features = VIG_SDM845_MASK,
+ .sblk = &dpu_vig_sblk_qseed3_1_4,
+ .xin_id = 0,
+ .type = SSPP_TYPE_VIG,
+ .clk_ctrl = DPU_CLK_CTRL_VIG0,
+ }, {
+ .name = "sspp_1", .id = SSPP_VIG1,
+ .base = 0x6000, .len = 0x1f0,
+ .features = VIG_SDM845_MASK,
+ .sblk = &dpu_vig_sblk_qseed3_1_4,
+ .xin_id = 4,
+ .type = SSPP_TYPE_VIG,
+ .clk_ctrl = DPU_CLK_CTRL_VIG1,
+ }, {
+ .name = "sspp_2", .id = SSPP_DMA0,
+ .base = 0x24000, .len = 0x1f0,
+ .features = DMA_SDM845_MASK,
+ .sblk = &dpu_dma_sblk,
+ .xin_id = 1,
+ .type = SSPP_TYPE_DMA,
+ .clk_ctrl = DPU_CLK_CTRL_DMA0,
+ }, {
+ .name = "sspp_9", .id = SSPP_DMA1,
+ .base = 0x26000, .len = 0x1f0,
+ .features = DMA_SDM845_MASK,
+ .sblk = &dpu_dma_sblk,
+ .xin_id = 5,
+ .type = SSPP_TYPE_DMA,
+ .clk_ctrl = DPU_CLK_CTRL_DMA1,
+ }, {
+ .name = "sspp_10", .id = SSPP_DMA2,
+ .base = 0x28000, .len = 0x1f0,
+ .features = DMA_CURSOR_SDM845_MASK,
+ .sblk = &dpu_dma_sblk,
+ .xin_id = 9,
+ .type = SSPP_TYPE_DMA,
+ .clk_ctrl = DPU_CLK_CTRL_DMA2,
+ },
+};
+
+static const struct dpu_lm_cfg sm7150_lm[] = {
+ {
+ .name = "lm_0", .id = LM_0,
+ .base = 0x44000, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = LM_1,
+ .pingpong = PINGPONG_0,
+ .dspp = DSPP_0,
+ }, {
+ .name = "lm_1", .id = LM_1,
+ .base = 0x45000, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = LM_0,
+ .pingpong = PINGPONG_1,
+ .dspp = DSPP_1,
+ }, {
+ .name = "lm_2", .id = LM_2,
+ .base = 0x46000, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = LM_3,
+ .pingpong = PINGPONG_2,
+ }, {
+ .name = "lm_3", .id = LM_3,
+ .base = 0x47000, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = LM_2,
+ .pingpong = PINGPONG_3,
+ }, {
+ .name = "lm_4", .id = LM_4,
+ .base = 0x0, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = 0,
+ .pingpong = PINGPONG_4,
+ }, {
+ .name = "lm_5", .id = LM_5,
+ .base = 0x0, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = 0,
+ .pingpong = PINGPONG_5,
+ },
+};
+
+static const struct dpu_dspp_cfg sm7150_dspp[] = {
+ {
+ .name = "dspp_0", .id = DSPP_0,
+ .base = 0x54000, .len = 0x1800,
+ .features = DSPP_SC7180_MASK,
+ .sblk = &sdm845_dspp_sblk,
+ }, {
+ .name = "dspp_1", .id = DSPP_1,
+ .base = 0x56000, .len = 0x1800,
+ .features = DSPP_SC7180_MASK,
+ .sblk = &sdm845_dspp_sblk,
+ },
+};
+
+static const struct dpu_pingpong_cfg sm7150_pp[] = {
+ {
+ .name = "pingpong_0", .id = PINGPONG_0,
+ .base = 0x70000, .len = 0xd4,
+ .features = PINGPONG_SM8150_MASK,
+ .sblk = &sdm845_pp_sblk,
+ .merge_3d = MERGE_3D_0,
+ .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+ }, {
+ .name = "pingpong_1", .id = PINGPONG_1,
+ .base = 0x70800, .len = 0xd4,
+ .features = PINGPONG_SM8150_MASK,
+ .sblk = &sdm845_pp_sblk,
+ .merge_3d = MERGE_3D_0,
+ .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+ }, {
+ .name = "pingpong_2", .id = PINGPONG_2,
+ .base = 0x71000, .len = 0xd4,
+ .features = PINGPONG_SM8150_MASK,
+ .sblk = &sdm845_pp_sblk,
+ .merge_3d = MERGE_3D_1,
+ .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
+ }, {
+ .name = "pingpong_3", .id = PINGPONG_3,
+ .base = 0x71800, .len = 0xd4,
+ .features = PINGPONG_SM8150_MASK,
+ .sblk = &sdm845_pp_sblk,
+ .merge_3d = MERGE_3D_1,
+ .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
+ },
+};
+
+static const struct dpu_merge_3d_cfg sm7150_merge_3d[] = {
+ {
+ .name = "merge_3d_0", .id = MERGE_3D_0,
+ .base = 0x83000, .len = 0x8,
+ }, {
+ .name = "merge_3d_1", .id = MERGE_3D_1,
+ .base = 0x83100, .len = 0x8,
+ },
+};
+
+static const struct dpu_dsc_cfg sm7150_dsc[] = {
+ {
+ .name = "dsc_0", .id = DSC_0,
+ .base = 0x80000, .len = 0x140,
+ .features = BIT(DPU_DSC_OUTPUT_CTRL),
+ }, {
+ .name = "dsc_1", .id = DSC_1,
+ .base = 0x80400, .len = 0x140,
+ .features = BIT(DPU_DSC_OUTPUT_CTRL),
+ },
+};
+
+static const struct dpu_intf_cfg sm7150_intf[] = {
+ {
+ .name = "intf_0", .id = INTF_0,
+ .base = 0x6a000, .len = 0x280,
+ .features = INTF_SC7180_MASK,
+ .type = INTF_DP,
+ .controller_id = MSM_DP_CONTROLLER_0,
+ .prog_fetch_lines_worst_case = 24,
+ .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+ .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25),
+ }, {
+ .name = "intf_1", .id = INTF_1,
+ .base = 0x6a800, .len = 0x2bc,
+ .features = INTF_SC7180_MASK,
+ .type = INTF_DSI,
+ .controller_id = MSM_DSI_CONTROLLER_0,
+ .prog_fetch_lines_worst_case = 24,
+ .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
+ .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
+ .intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2),
+ }, {
+ .name = "intf_2", .id = INTF_2,
+ .base = 0x6b000, .len = 0x2bc,
+ .features = INTF_SC7180_MASK,
+ .type = INTF_DSI,
+ .controller_id = MSM_DSI_CONTROLLER_1,
+ .prog_fetch_lines_worst_case = 24,
+ .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 28),
+ .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 29),
+ .intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF2_TEAR_INTR, 2),
+ }, {
+ .name = "intf_3", .id = INTF_3,
+ .base = 0x6b800, .len = 0x280,
+ .features = INTF_SC7180_MASK,
+ .type = INTF_DP,
+ .controller_id = MSM_DP_CONTROLLER_1,
+ .prog_fetch_lines_worst_case = 24,
+ .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 30),
+ .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 31),
+ },
+};
+
+static const struct dpu_wb_cfg sm7150_wb[] = {
+ {
+ .name = "wb_2", .id = WB_2,
+ .base = 0x65000, .len = 0x2c8,
+ .features = WB_SM8250_MASK,
+ .format_list = wb2_formats_rgb,
+ .num_formats = ARRAY_SIZE(wb2_formats_rgb),
+ .clk_ctrl = DPU_CLK_CTRL_WB2,
+ .xin_id = 6,
+ .vbif_idx = VBIF_RT,
+ .maxlinewidth = 4096,
+ .intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4),
+ },
+};
+
+static const struct dpu_perf_cfg sm7150_perf_data = {
+ .max_bw_low = 7100000,
+ .max_bw_high = 7100000,
+ .min_core_ib = 2400000,
+ .min_llcc_ib = 800000,
+ .min_dram_ib = 800000,
+ .min_prefill_lines = 24,
+ .danger_lut_tbl = {0xf, 0xffff, 0x0},
+ .safe_lut_tbl = {0xfff8, 0xf000, 0xffff},
+ .qos_lut_tbl = {
+ {
+ .nentry = ARRAY_SIZE(sm8150_qos_linear),
+ .entries = sm8150_qos_linear
+ }, {
+ .nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+ .entries = sc7180_qos_macrotile
+ }, {
+ .nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+ .clk_inefficiency_factor = 105,
+ .bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_mdss_version sm7150_mdss_ver = {
+ .core_major_ver = 5,
+ .core_minor_ver = 2,
+};
+
+const struct dpu_mdss_cfg dpu_sm7150_cfg = {
+ .mdss_ver = &sm7150_mdss_ver,
+ .caps = &sm7150_dpu_caps,
+ .mdp = &sm7150_mdp,
+ .ctl_count = ARRAY_SIZE(sm7150_ctl),
+ .ctl = sm7150_ctl,
+ .sspp_count = ARRAY_SIZE(sm7150_sspp),
+ .sspp = sm7150_sspp,
+ .mixer_count = ARRAY_SIZE(sm7150_lm),
+ .mixer = sm7150_lm,
+ .dspp_count = ARRAY_SIZE(sm7150_dspp),
+ .dspp = sm7150_dspp,
+ .pingpong_count = ARRAY_SIZE(sm7150_pp),
+ .pingpong = sm7150_pp,
+ .merge_3d_count = ARRAY_SIZE(sm7150_merge_3d),
+ .merge_3d = sm7150_merge_3d,
+ .dsc_count = ARRAY_SIZE(sm7150_dsc),
+ .dsc = sm7150_dsc,
+ .intf_count = ARRAY_SIZE(sm7150_intf),
+ .intf = sm7150_intf,
+ .wb_count = ARRAY_SIZE(sm7150_wb),
+ .wb = sm7150_wb,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .perf = &sm7150_perf_data,
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index f2b6eac7601dd..a488af935bfa8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -688,6 +688,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
#include "catalog/dpu_5_0_sm8150.h"
#include "catalog/dpu_5_1_sc8180x.h"
+#include "catalog/dpu_5_2_sm7150.h"
#include "catalog/dpu_5_4_sm6125.h"
#include "catalog/dpu_6_0_sm8250.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index d1aef778340be..37e18e820a20a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -838,6 +838,7 @@ extern const struct dpu_mdss_cfg dpu_sdm845_cfg;
extern const struct dpu_mdss_cfg dpu_sdm670_cfg;
extern const struct dpu_mdss_cfg dpu_sm8150_cfg;
extern const struct dpu_mdss_cfg dpu_sc8180x_cfg;
+extern const struct dpu_mdss_cfg dpu_sm7150_cfg;
extern const struct dpu_mdss_cfg dpu_sm8250_cfg;
extern const struct dpu_mdss_cfg dpu_sc7180_cfg;
extern const struct dpu_mdss_cfg dpu_sm6115_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 1955848b1b781..291af6b406b2a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1405,6 +1405,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sm6125-dpu", .data = &dpu_sm6125_cfg, },
{ .compatible = "qcom,sm6350-dpu", .data = &dpu_sm6350_cfg, },
{ .compatible = "qcom,sm6375-dpu", .data = &dpu_sm6375_cfg, },
+ { .compatible = "qcom,sm7150-dpu", .data = &dpu_sm7150_cfg, },
{ .compatible = "qcom,sm8150-dpu", .data = &dpu_sm8150_cfg, },
{ .compatible = "qcom,sm8250-dpu", .data = &dpu_sm8250_cfg, },
{ .compatible = "qcom,sm8350-dpu", .data = &dpu_sm8350_cfg, },
--
2.45.2
prev parent reply other threads:[~2024-06-11 22:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-11 22:37 [PATCH 0/4] Add MDSS and DPU support for QCOM SM7150 SoC Danila Tikhonov
2024-06-11 22:37 ` [PATCH 1/4] dt-bindings: display/msm: Add SM7150 MDSS Danila Tikhonov
2024-06-12 0:34 ` Rob Herring (Arm)
2024-06-12 6:19 ` Danila Tikhonov
2024-06-12 13:20 ` Rob Herring
2024-06-12 13:21 ` Dmitry Baryshkov
2024-06-11 22:37 ` [PATCH 2/4] drm/msm: mdss: Add SM7150 support Danila Tikhonov
2024-06-11 22:37 ` [PATCH 3/4] dt-bindings: display/msm: Add SM7150 DPU Danila Tikhonov
2024-06-11 23:33 ` Rob Herring (Arm)
2024-06-11 22:37 ` Danila Tikhonov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240611223743.113223-5-danila@jiaxyga.com \
--to=danila@jiaxyga.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=marijn.suijten@somainline.org \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_jesszhan@quicinc.com \
--cc=quic_khsieh@quicinc.com \
--cc=quic_rmccann@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh@kernel.org \
--cc=sean@poorly.run \
--cc=swboyd@chromium.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®