From: Andrew Davis <afd@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Andrew Davis <afd@ti.com>
Subject: [PATCH] arm64: dts: ti: k3-am642-sk: Add power supply temperature sensors
Date: Wed, 12 Jun 2024 13:38:26 -0500 [thread overview]
Message-ID: <20240612183826.121856-1-afd@ti.com> (raw)
The SK-AM64 board has two TMP100 temperature sensors, add these here.
Signed-off-by: Andrew Davis <afd@ti.com>
---
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 5b028b3a3192f..44ecbcf1c8447 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -430,6 +430,18 @@ exp2: gpio@60 {
#gpio-cells = <2>;
gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
};
+
+ /* SoC power supply temperature */
+ tmp100@48 {
+ compatible = "ti,tmp100";
+ reg = <0x48>;
+ };
+
+ /* DDR power supply temperature */
+ tmp100@49 {
+ compatible = "ti,tmp100";
+ reg = <0x49>;
+ };
};
/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
--
2.39.2
next reply other threads:[~2024-06-12 18:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-12 18:38 Andrew Davis [this message]
2024-06-21 15:14 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240612183826.121856-1-afd@ti.com \
--to=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®