[PATCH] arm64: dts: ti: k3-am642-sk: Add power supply temperature sensors

[PATCH] arm64: dts: ti: k3-am642-sk: Add power supply temperature sensors

[Andrew Davis]

The SK-AM64 board has two TMP100 temperature sensors, add these here.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am642-sk.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 5b028b3a3192f..44ecbcf1c8447 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -430,6 +430,18 @@ exp2: gpio@60 {
 		#gpio-cells = <2>;
 		gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
 	};
+
+	/* SoC power supply temperature */
+	tmp100@48 {
+		compatible = "ti,tmp100";
+		reg = <0x48>;
+	};
+
+	/* DDR power supply temperature */
+	tmp100@49 {
+		compatible = "ti,tmp100";
+		reg = <0x49>;
+	};
 };
 
 /* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
-- 
2.39.2

Re: [PATCH] arm64: dts: ti: k3-am642-sk: Add power supply temperature sensors

[Vignesh Raghavendra]

Hi Andrew Davis,

On Wed, 12 Jun 2024 13:38:26 -0500, Andrew Davis wrote:
> The SK-AM64 board has two TMP100 temperature sensors, add these here.
> 
> 

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-am642-sk: Add power supply temperature sensors
      commit: b82feb3a56e25919d6729b98c8152d950045fc5b

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh