[PATCH v3 05/12] PCI: brcmstb: Use swinit reset if available

[Jim Quinlan <james.quinlan@broadcom.com>]

[-- Attachment #1: Type: text/plain, Size: 1569 bytes --]

The 7712 SOC adds a software init reset device for the PCIe HW.
If found in the DT node, use it.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 92816d8d215a..4dc2ff7f3167 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -266,6 +266,7 @@ struct brcm_pcie {
 	struct reset_control	*rescal;
 	struct reset_control	*perst_reset;
 	struct reset_control	*bridge;
+	struct reset_control	*swinit;
 	int			num_memc;
 	u64			memc_size[PCIE_BRCM_MAX_MEMC];
 	u32			hw_rev;
@@ -1633,12 +1634,27 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	if (IS_ERR(pcie->bridge))
 		return PTR_ERR(pcie->bridge);
 
+	pcie->swinit = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit");
+	if (IS_ERR(pcie->swinit))
+		return PTR_ERR(pcie->swinit);
+
 	ret = clk_prepare_enable(pcie->clk);
 	if (ret) {
 		dev_err(&pdev->dev, "could not enable clock\n");
 		return ret;
 	}
 
+	ret = reset_control_assert(pcie->swinit);
+	if (ret) {
+		dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n");
+		goto clk_out;
+	}
+	ret = reset_control_deassert(pcie->swinit);
+	if (ret) {
+		dev_err(&pdev->dev, "could not de-assert reset 'swinit' after asserting\n");
+		goto clk_out;
+	}
+
 	ret = reset_control_reset(pcie->rescal);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
-- 
2.17.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4210 bytes --]