From: Ye Zhang <ye.zhang@rock-chips.com>
To: linus.walleij@linaro.org, brgl@bgdev.pl, heiko@sntech.de,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
mika.westerberg@linux.intel.com,
andriy.shevchenko@linux.intel.com, tao.huang@rock-chips.com,
finley.xiao@rock-chips.com, tim.chen@rock-chips.com,
elaine.zhang@rock-chips.com, Ye Zhang <ye.zhang@rock-chips.com>
Subject: [PATCH v2] gpio: rockchip: support new version gpio
Date: Fri, 23 Aug 2024 11:43:11 +0800 [thread overview]
Message-ID: <20240823034314.62305-9-ye.zhang@rock-chips.com> (raw)
In-Reply-To: <20240823034314.62305-1-ye.zhang@rock-chips.com>
The next version gpio controller on SoCs like rk3576 which support four
OS operation and four interrupts
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
---
drivers/gpio/gpio-rockchip.c | 40 ++++++++++++++++++++++++------------
1 file changed, 27 insertions(+), 13 deletions(-)
diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
index 25ddf6a82c09..5289c94d5c60 100644
--- a/drivers/gpio/gpio-rockchip.c
+++ b/drivers/gpio/gpio-rockchip.c
@@ -29,6 +29,7 @@
#define GPIO_TYPE_V1 (0) /* GPIO Version ID reserved */
#define GPIO_TYPE_V2 (0x01000C2B) /* GPIO Version ID 0x01000C2B */
#define GPIO_TYPE_V2_1 (0x0101157C) /* GPIO Version ID 0x0101157C */
+#define GPIO_TYPE_V2_2 (0x010219C8) /* GPIO Version ID 0x010219C8 */
static const struct rockchip_gpio_regs gpio_regs_v1 = {
.port_dr = 0x00,
@@ -78,7 +79,7 @@ static inline void rockchip_gpio_writel(struct rockchip_pin_bank *bank,
{
void __iomem *reg = bank->reg_base + offset;
- if (bank->gpio_type == GPIO_TYPE_V2)
+ if (bank->gpio_type >= GPIO_TYPE_V2)
gpio_writel_v2(value, reg);
else
writel(value, reg);
@@ -90,7 +91,7 @@ static inline u32 rockchip_gpio_readl(struct rockchip_pin_bank *bank,
void __iomem *reg = bank->reg_base + offset;
u32 value;
- if (bank->gpio_type == GPIO_TYPE_V2)
+ if (bank->gpio_type >= GPIO_TYPE_V2)
value = gpio_readl_v2(reg);
else
value = readl(reg);
@@ -105,7 +106,7 @@ static inline void rockchip_gpio_writel_bit(struct rockchip_pin_bank *bank,
void __iomem *reg = bank->reg_base + offset;
u32 data;
- if (bank->gpio_type == GPIO_TYPE_V2) {
+ if (bank->gpio_type >= GPIO_TYPE_V2) {
if (value)
data = BIT(bit % 16) | BIT(bit % 16 + 16);
else
@@ -126,7 +127,7 @@ static inline u32 rockchip_gpio_readl_bit(struct rockchip_pin_bank *bank,
void __iomem *reg = bank->reg_base + offset;
u32 data;
- if (bank->gpio_type == GPIO_TYPE_V2) {
+ if (bank->gpio_type >= GPIO_TYPE_V2) {
data = readl(bit >= 16 ? reg + 0x4 : reg);
data >>= bit % 16;
} else {
@@ -204,18 +205,24 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc,
unsigned int cur_div_reg;
u64 div;
- div_debounce_support = (bank->gpio_type == GPIO_TYPE_V2) && !IS_ERR(bank->db_clk);
+ div_debounce_support = (bank->gpio_type >= GPIO_TYPE_V2) && !IS_ERR(bank->db_clk);
if (debounce && div_debounce_support) {
freq = clk_get_rate(bank->db_clk);
if (!freq)
return -EINVAL;
div = (u64)(GENMASK(23, 0) + 1) * 1000000;
- max_debounce = DIV_ROUND_CLOSEST_ULL(div, freq);
+ if (bank->gpio_type == GPIO_TYPE_V2)
+ max_debounce = DIV_ROUND_CLOSEST_ULL(div, freq);
+ else
+ max_debounce = DIV_ROUND_CLOSEST_ULL(div, 2 * freq);
if (debounce > max_debounce)
return -EINVAL;
div = (u64)debounce * freq;
- div_reg = DIV_ROUND_CLOSEST_ULL(div, USEC_PER_SEC) - 1;
+ if (bank->gpio_type == GPIO_TYPE_V2)
+ div_reg = DIV_ROUND_CLOSEST_ULL(div, USEC_PER_SEC) - 1;
+ else
+ div_reg = DIV_ROUND_CLOSEST_ULL(div, USEC_PER_SEC / 2) - 1;
}
raw_spin_lock_irqsave(&bank->slock, flags);
@@ -401,7 +408,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
polarity = rockchip_gpio_readl(bank, bank->gpio_regs->int_polarity);
if (type == IRQ_TYPE_EDGE_BOTH) {
- if (bank->gpio_type == GPIO_TYPE_V2) {
+ if (bank->gpio_type >= GPIO_TYPE_V2) {
rockchip_gpio_writel_bit(bank, d->hwirq, 1,
bank->gpio_regs->int_bothedge);
goto out;
@@ -420,7 +427,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
polarity |= mask;
}
} else {
- if (bank->gpio_type == GPIO_TYPE_V2) {
+ if (bank->gpio_type >= GPIO_TYPE_V2) {
rockchip_gpio_writel_bit(bank, d->hwirq, 0,
bank->gpio_regs->int_bothedge);
} else {
@@ -526,7 +533,7 @@ static int rockchip_interrupts_register(struct rockchip_pin_bank *bank)
}
gc = irq_get_domain_generic_chip(bank->domain, 0);
- if (bank->gpio_type == GPIO_TYPE_V2) {
+ if (bank->gpio_type >= GPIO_TYPE_V2) {
gc->reg_writel = gpio_writel_v2;
gc->reg_readl = gpio_readl_v2;
}
@@ -648,13 +655,20 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
id = readl(bank->reg_base + gpio_regs_v2.version_id);
- /* If not gpio v2, that is default to v1. */
- if (id == GPIO_TYPE_V2 || id == GPIO_TYPE_V2_1) {
+ switch (id) {
+ case GPIO_TYPE_V2:
+ case GPIO_TYPE_V2_1:
bank->gpio_regs = &gpio_regs_v2;
bank->gpio_type = GPIO_TYPE_V2;
- } else {
+ break;
+ case GPIO_TYPE_V2_2:
+ bank->gpio_regs = &gpio_regs_v2;
+ bank->gpio_type = GPIO_TYPE_V2_2;
+ break;
+ default:
bank->gpio_regs = &gpio_regs_v1;
bank->gpio_type = GPIO_TYPE_V1;
+ pr_info("Note: Use default GPIO_TYPE_V1!\n");
}
return 0;
--
2.34.1
next prev parent reply other threads:[~2024-08-23 9:42 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-23 3:43 [PATCH v2] gpio: rockchip: Update the GPIO driver Ye Zhang
2024-08-23 3:43 ` [PATCH v2] gpio: rockchip: avoid division by zero Ye Zhang
2024-08-23 9:27 ` Heiko Stübner
2024-08-23 14:45 ` Andy Shevchenko
2024-08-23 3:43 ` [PATCH v2] gpio: rockchip: release reference to device node Ye Zhang
2024-08-23 9:28 ` Heiko Stübner
2024-08-23 10:52 ` Shawn Lin
2024-08-23 3:43 ` [PATCH v2] gpio: rockchip: resolve overflow issues Ye Zhang
2024-08-23 9:34 ` Heiko Stübner
2024-08-23 10:59 ` Shawn Lin
2024-08-23 14:49 ` Andy Shevchenko
2024-08-23 14:48 ` Andy Shevchenko
2024-08-23 3:43 ` [PATCH v2] gpio: rockchip: resolve underflow issue Ye Zhang
2024-08-23 14:51 ` Andy Shevchenko
2024-08-23 3:43 ` [PATCH v2] gpio: rockchip: fix debounce calculate Ye Zhang
2024-08-23 3:43 ` [PATCH v2] gpio: rockchip: Update debounce config function Ye Zhang
2024-08-23 3:43 ` [PATCH v2] gpio: rockchip: support 'clock-names' from dt nodes Ye Zhang
2024-08-23 14:56 ` Andy Shevchenko
2024-08-23 3:43 ` Ye Zhang [this message]
2024-08-23 13:32 ` [PATCH v2] gpio: rockchip: support new version gpio Sebastian Reichel
2024-08-23 15:05 ` Andy Shevchenko
2024-08-23 3:43 ` [PATCH v2] gpio: rockchip: Set input direction when request irq Ye Zhang
2024-08-23 14:59 ` Andy Shevchenko
2024-08-23 3:43 ` [PATCH v2] gpio: rockchip: support ACPI Ye Zhang
2024-08-23 5:27 ` Mika Westerberg
2024-08-23 7:03 ` [PATCH v2] gpio: rockchip: Update the GPIO driver Bartosz Golaszewski
2024-08-23 7:06 ` Dragan Simic
2024-08-23 15:07 ` Andy Shevchenko
2024-08-23 9:33 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240823034314.62305-9-ye.zhang@rock-chips.com \
--to=ye.zhang@rock-chips.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=brgl@bgdev.pl \
--cc=elaine.zhang@rock-chips.com \
--cc=finley.xiao@rock-chips.com \
--cc=heiko@sntech.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mika.westerberg@linux.intel.com \
--cc=tao.huang@rock-chips.com \
--cc=tim.chen@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®