From: Jonas Karlman <jonas@kwiboo.se>
To: Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Christian Hewitt <christianshewitt@gmail.com>,
Diederik de Haas <didi.debian@cknow.org>,
Christopher Obbard <chris.obbard@collabora.com>,
dri-devel@lists.freedesktop.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 03/10] drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable
Date: Sun, 8 Sep 2024 13:28:05 +0000 [thread overview]
Message-ID: <20240908132823.3308029-4-jonas@kwiboo.se> (raw)
In-Reply-To: <20240908132823.3308029-1-jonas@kwiboo.se>
Change to only call poweron/poweroff from atomic_enable/atomic_disable
ops instead of trying to be clever by keeping a bridge_is_on state and
poweron/off in the hotplug irq handler.
The bridge is already enabled/disabled depending on connection state
with the call to drm_helper_hpd_irq_event() in hotplug irq handler.
A benefit of this is that drm mode_config mutex is always held at
poweron/off, something that may reduce the need for our own mutex.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v2: Update commit message
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 33 ++---------------------
1 file changed, 2 insertions(+), 31 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 055fc9848df4..5b67640b1d0a 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -169,7 +169,6 @@ struct dw_hdmi {
enum drm_connector_force force; /* mutex-protected force state */
struct drm_connector *curr_conn;/* current connector (only valid when !disabled) */
bool disabled; /* DRM has disabled our bridge */
- bool bridge_is_on; /* indicates the bridge is on */
bool rxsense; /* rxsense state */
u8 phy_mask; /* desired phy int mask settings */
u8 mc_clkdis; /* clock disable register */
@@ -2382,8 +2381,6 @@ static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi)
static void dw_hdmi_poweron(struct dw_hdmi *hdmi)
{
- hdmi->bridge_is_on = true;
-
/*
* The curr_conn field is guaranteed to be valid here, as this function
* is only be called when !hdmi->disabled.
@@ -2397,30 +2394,6 @@ static void dw_hdmi_poweroff(struct dw_hdmi *hdmi)
hdmi->phy.ops->disable(hdmi, hdmi->phy.data);
hdmi->phy.enabled = false;
}
-
- hdmi->bridge_is_on = false;
-}
-
-static void dw_hdmi_update_power(struct dw_hdmi *hdmi)
-{
- int force = hdmi->force;
-
- if (hdmi->disabled) {
- force = DRM_FORCE_OFF;
- } else if (force == DRM_FORCE_UNSPECIFIED) {
- if (hdmi->rxsense)
- force = DRM_FORCE_ON;
- else
- force = DRM_FORCE_OFF;
- }
-
- if (force == DRM_FORCE_OFF) {
- if (hdmi->bridge_is_on)
- dw_hdmi_poweroff(hdmi);
- } else {
- if (!hdmi->bridge_is_on)
- dw_hdmi_poweron(hdmi);
- }
}
/*
@@ -2545,7 +2518,6 @@ static void dw_hdmi_connector_force(struct drm_connector *connector)
mutex_lock(&hdmi->mutex);
hdmi->force = connector->force;
- dw_hdmi_update_power(hdmi);
dw_hdmi_update_phy_mask(hdmi);
mutex_unlock(&hdmi->mutex);
}
@@ -2954,7 +2926,7 @@ static void dw_hdmi_bridge_atomic_disable(struct drm_bridge *bridge,
mutex_lock(&hdmi->mutex);
hdmi->disabled = true;
hdmi->curr_conn = NULL;
- dw_hdmi_update_power(hdmi);
+ dw_hdmi_poweroff(hdmi);
dw_hdmi_update_phy_mask(hdmi);
handle_plugged_change(hdmi, false);
mutex_unlock(&hdmi->mutex);
@@ -2973,7 +2945,7 @@ static void dw_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
mutex_lock(&hdmi->mutex);
hdmi->disabled = false;
hdmi->curr_conn = connector;
- dw_hdmi_update_power(hdmi);
+ dw_hdmi_poweron(hdmi);
dw_hdmi_update_phy_mask(hdmi);
handle_plugged_change(hdmi, true);
mutex_unlock(&hdmi->mutex);
@@ -3072,7 +3044,6 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
if (hpd)
hdmi->rxsense = true;
- dw_hdmi_update_power(hdmi);
dw_hdmi_update_phy_mask(hdmi);
}
mutex_unlock(&hdmi->mutex);
--
2.46.0
next prev parent reply other threads:[~2024-09-08 13:29 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-08 13:28 [PATCH v2 00/10] drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup Jonas Karlman
2024-09-08 13:28 ` [PATCH v2 01/10] drm: bridge: dw_hdmi: Disable scrambler feature when not supported Jonas Karlman
2024-09-09 13:15 ` Neil Armstrong
2024-09-08 13:28 ` [PATCH v2 02/10] drm: bridge: dw_hdmi: Only notify connected status on HPD interrupt Jonas Karlman
2024-09-09 13:16 ` Neil Armstrong
2024-09-09 15:12 ` Jonas Karlman
2024-09-08 13:28 ` Jonas Karlman [this message]
2024-09-13 8:05 ` [PATCH v2 03/10] drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable Neil Armstrong
2024-09-08 13:28 ` [PATCH v2 04/10] drm: bridge: dw_hdmi: Use passed mode instead of stored previous_mode Jonas Karlman
2024-09-13 8:04 ` Neil Armstrong
2024-09-08 13:28 ` [PATCH v2 05/10] drm: bridge: dw_hdmi: Fold poweron and setup functions Jonas Karlman
2024-09-13 8:06 ` Neil Armstrong
2024-09-08 13:28 ` [PATCH v2 06/10] drm: bridge: dw_hdmi: Remove previous_mode and mode_set Jonas Karlman
2024-09-13 8:03 ` Neil Armstrong
2024-09-08 13:28 ` [PATCH v2 07/10] drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect Jonas Karlman
2024-09-08 13:28 ` [PATCH v2 08/10] drm: bridge: dw_hdmi: Remove cec_notifier_mutex Jonas Karlman
2024-09-08 13:28 ` [PATCH v2 09/10] drm: bridge: dw_hdmi: Update EDID during hotplug processing Jonas Karlman
2024-09-13 8:02 ` Neil Armstrong
2024-09-19 20:34 ` Jonas Karlman
2024-09-20 7:04 ` neil.armstrong
2024-09-20 11:51 ` Jonas Karlman
2024-09-08 13:28 ` [PATCH v2 10/10] drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio Jonas Karlman
2024-09-13 17:30 ` [PATCH v2 00/10] drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup Diederik de Haas
2024-10-02 19:38 ` Diederik de Haas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240908132823.3308029-4-jonas@kwiboo.se \
--to=jonas@kwiboo.se \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=chris.obbard@collabora.com \
--cc=christianshewitt@gmail.com \
--cc=didi.debian@cknow.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®