Re: [PATCH v2 09/10] drm: bridge: dw_hdmi: Update EDID during hotplug processing

[Neil Armstrong <neil.armstrong@linaro.org>]

On 08/09/2024 15:28, Jonas Karlman wrote:
> Update successfully read EDID during hotplug processing to ensure the
> connector diplay_info is always up-to-date.
> 
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> ---
> v2: No change
> ---
>   drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 12 ++++++++++++
>   1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index c19307120909..7bd9f895f03f 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2457,6 +2457,18 @@ dw_hdmi_connector_detect(struct drm_connector *connector, bool force)
>   
>   	status = dw_hdmi_detect(hdmi);
>   
> +	/* Update EDID during hotplug processing (force=false) */
> +	if (status == connector_status_connected && !force) {
> +		const struct drm_edid *drm_edid;
> +
> +		drm_edid = dw_hdmi_edid_read(hdmi, connector);
> +		if (drm_edid)
> +			drm_edid_connector_update(connector, drm_edid);
> +		cec_notifier_set_phys_addr(hdmi->cec_notifier,
> +			connector->display_info.source_physical_address);
> +		drm_edid_free(drm_edid);
> +	}
> +
>   	if (status == connector_status_disconnected)
>   		cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
>   

I wonder why we should read edid at each dw_hdmi_connector_detect() call,
AFAIK it should only be when we have HPD pulses

Neil