mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 1/3] arm64: dts: ti: k3-am62-phycore-som: Add M4F remoteproc nodes
@ 2024-09-11 12:42 Wadim Egorov
  2024-09-11 12:42 ` [PATCH 2/3] arm64: dts: ti: k3-am64-phycore-som: " Wadim Egorov
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Wadim Egorov @ 2024-09-11 12:42 UTC (permalink / raw)
  To: linux-arm-kernel, devicetree, linux-kernel, upstream
  Cc: d.schultz, nm, vigneshr, kristo, robh, krzk+dt, conor+dt

The AM62x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed. The first region is used
as a DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.

The current carveout addresses and sizes are defined statically for
each rproc device. The M4F processor does not have an MMU, and as such
requires the exact memory used by the firmware to be set-aside.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 .../boot/dts/ti/k3-am62-phycore-som.dtsi      | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 43488cc8bcb1..bbf99938c187 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -45,6 +45,18 @@ ramoops@9ca00000 {
 			pmsg-size = <0x8000>;
 		};
 
+		mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9cb00000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_m4fss_memory_region: m4f-memory@9cc00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9cc00000 0x00 0xe00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -196,6 +208,13 @@ cpsw3g_phy1: ethernet-phy@1 {
 	};
 };
 
+&mailbox0_cluster0 {
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -295,6 +314,13 @@ i2c_som_rtc: rtc@52 {
 	};
 };
 
+&mcu_m4fss {
+	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
+	memory-region = <&mcu_m4fss_dma_memory_region>,
+			<&mcu_m4fss_memory_region>;
+	status = "okay";
+};
+
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
-- 
2.34.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2024-10-30  4:50 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-09-11 12:42 [PATCH 1/3] arm64: dts: ti: k3-am62-phycore-som: Add M4F remoteproc nodes Wadim Egorov
2024-09-11 12:42 ` [PATCH 2/3] arm64: dts: ti: k3-am64-phycore-som: " Wadim Egorov
2024-09-11 12:42 ` [PATCH 3/3] arm: arm64: dts: ti: k3-am642-phyboard-electra-rdk: Enable trickle charger Wadim Egorov
2024-10-30  4:50 ` [PATCH 1/3] arm64: dts: ti: k3-am62-phycore-som: Add M4F remoteproc nodes Vignesh Raghavendra

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®