* [PATCH] hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
@ 2024-09-19 17:34 Peter Colberg
2024-09-20 5:45 ` Guenter Roeck
0 siblings, 1 reply; 2+ messages in thread
From: Peter Colberg @ 2024-09-19 17:34 UTC (permalink / raw)
To: Xu Yilun, Tom Rix, Jean Delvare, Guenter Roeck, Tianfei zhang,
linux-hwmon, linux-kernel
Cc: Russ Weight, Marco Pagani, Matthew Gerlach, Peter Colberg, Michael Adler
Consistently use CVL instead of Columbiaville, since CVL is already
being used in all other sensor labels for the Intel N6000 card.
Fixes: e1983220ae14 ("hwmon: intel-m10-bmc-hwmon: Add N6000 sensors")
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Michael Adler <michael.adler@intel.com>
---
drivers/hwmon/intel-m10-bmc-hwmon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/intel-m10-bmc-hwmon.c b/drivers/hwmon/intel-m10-bmc-hwmon.c
index ca2dff158925..96397ae6ff18 100644
--- a/drivers/hwmon/intel-m10-bmc-hwmon.c
+++ b/drivers/hwmon/intel-m10-bmc-hwmon.c
@@ -358,7 +358,7 @@ static const struct m10bmc_sdata n6000bmc_temp_tbl[] = {
{ 0x4f0, 0x4f4, 0x4f8, 0x52c, 0x0, 500, "Board Top Near FPGA Temperature" },
{ 0x4fc, 0x500, 0x504, 0x52c, 0x0, 500, "Board Bottom Near CVL Temperature" },
{ 0x508, 0x50c, 0x510, 0x52c, 0x0, 500, "Board Top East Near VRs Temperature" },
- { 0x514, 0x518, 0x51c, 0x52c, 0x0, 500, "Columbiaville Die Temperature" },
+ { 0x514, 0x518, 0x51c, 0x52c, 0x0, 500, "CVL Die Temperature" },
{ 0x520, 0x524, 0x528, 0x52c, 0x0, 500, "Board Rear Side Temperature" },
{ 0x530, 0x534, 0x538, 0x52c, 0x0, 500, "Board Front Side Temperature" },
{ 0x53c, 0x540, 0x544, 0x0, 0x0, 500, "QSFP1 Case Temperature" },
--
2.46.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
2024-09-19 17:34 [PATCH] hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature Peter Colberg
@ 2024-09-20 5:45 ` Guenter Roeck
0 siblings, 0 replies; 2+ messages in thread
From: Guenter Roeck @ 2024-09-20 5:45 UTC (permalink / raw)
To: Peter Colberg
Cc: Xu Yilun, Tom Rix, Jean Delvare, Tianfei zhang, linux-hwmon,
linux-kernel, Russ Weight, Marco Pagani, Matthew Gerlach,
Michael Adler
On Thu, Sep 19, 2024 at 01:34:17PM -0400, Peter Colberg wrote:
> Consistently use CVL instead of Columbiaville, since CVL is already
> being used in all other sensor labels for the Intel N6000 card.
>
> Fixes: e1983220ae14 ("hwmon: intel-m10-bmc-hwmon: Add N6000 sensors")
> Signed-off-by: Peter Colberg <peter.colberg@intel.com>
> Reviewed-by: Michael Adler <michael.adler@intel.com>
Applied.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-09-20 5:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-09-19 17:34 [PATCH] hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature Peter Colberg
2024-09-20 5:45 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®