* [PATCH v1] dt-bindings: leds: pca955x: Convert text bindings to YAML
@ 2024-10-16 5:29 Delphine CC Chiu
2024-10-16 7:30 ` Krzysztof Kozlowski
0 siblings, 1 reply; 3+ messages in thread
From: Delphine CC Chiu @ 2024-10-16 5:29 UTC (permalink / raw)
To: patrick, Pavel Machek, Lee Jones, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Nate Case
Cc: Ricky CX Wu, Delphine CC Chiu, linux-leds, devicetree, linux-kernel
From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Convert the text bindings of pca955x to YAML so it could be used to
validate the DTS.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../devicetree/bindings/leds/leds-pca955x.txt | 89 ----------
.../devicetree/bindings/leds/nxp,pca955x.yaml | 161 ++++++++++++++++++
2 files changed, 161 insertions(+), 89 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/leds-pca955x.txt
create mode 100644 Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt
deleted file mode 100644
index 817f460f3a72..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pca955x.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-* NXP - pca955x LED driver
-
-The PCA955x family of chips are I2C LED blinkers whose pins not used
-to control LEDs can be used as general purpose I/Os. The GPIO pins can
-be input or output, and output pins can also be pulse-width controlled.
-
-Required properties:
-- compatible : should be one of :
- "nxp,pca9550"
- "nxp,pca9551"
- "nxp,pca9552"
- "ibm,pca9552"
- "nxp,pca9553"
-- #address-cells: must be 1
-- #size-cells: must be 0
-- reg: I2C slave address. depends on the model.
-
-Optional properties:
-- gpio-controller: allows pins to be used as GPIOs.
-- #gpio-cells: must be 2.
-- gpio-line-names: define the names of the GPIO lines
-
-LED sub-node properties:
-- reg : number of LED line.
- from 0 to 1 for the pca9550
- from 0 to 7 for the pca9551
- from 0 to 15 for the pca9552
- from 0 to 3 for the pca9553
-- type: (optional) either
- PCA955X_TYPE_NONE
- PCA955X_TYPE_LED
- PCA955X_TYPE_GPIO
- see dt-bindings/leds/leds-pca955x.h (default to LED)
-- label : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-
-Examples:
-
-pca9552: pca9552@60 {
- compatible = "nxp,pca9552";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x60>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15";
-
- gpio@12 {
- reg = <12>;
- type = <PCA955X_TYPE_GPIO>;
- };
- gpio@13 {
- reg = <13>;
- type = <PCA955X_TYPE_GPIO>;
- };
- gpio@14 {
- reg = <14>;
- type = <PCA955X_TYPE_GPIO>;
- };
- gpio@15 {
- reg = <15>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- led@0 {
- label = "red:power";
- linux,default-trigger = "default-on";
- reg = <0>;
- type = <PCA955X_TYPE_LED>;
- };
- led@1 {
- label = "green:power";
- reg = <1>;
- type = <PCA955X_TYPE_LED>;
- };
- led@2 {
- label = "pca9552:yellow";
- reg = <2>;
- type = <PCA955X_TYPE_LED>;
- };
- led@3 {
- label = "pca9552:white";
- reg = <3>;
- type = <PCA955X_TYPE_LED>;
- };
-};
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
new file mode 100644
index 000000000000..70f8c1dfa75a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA955X LED controllers
+
+maintainers:
+ - Nate Case <ncase@xes-inc.com>
+
+description: |
+ The PCA955x family of chips are I2C LED blinkers whose pins not used
+ to control LEDs can be used as general purpose I/Os. The GPIO pins can
+ be input or output, and output pins can also be pulse-width controlled.
+
+ For more product information please see the link below:
+ - https://www.nxp.com/docs/en/data-sheet/PCA9552.pdf
+
+properties:
+ compatible:
+ enum:
+ - nxp,pca9550
+ - nxp,pca9551
+ - nxp,pca9552
+ - ibm,pca9552
+ - nxp,pca9553
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ gpio-controller: true
+
+ gpio-line-names:
+ minItems: 1
+ maxItems: 16
+
+ '#gpio-cells':
+ const: 2
+
+patternProperties:
+ "^led@[0-9a-f]+$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+ type:
+ description: |
+ Output configuration, see include/dt-bindings/leds/leds-pca955x.h
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+ minimum: 0
+ maximum: 4
+
+ required:
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nxp,pca9550
+ then:
+ patternProperties:
+ "^led@[0-9a-f]+$":
+ properties:
+ reg:
+ maximum: 1
+ else:
+ if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nxp,pca9551
+ then:
+ patternProperties:
+ "^led@[0-9a-f]+$":
+ properties:
+ reg:
+ maximum: 7
+ else:
+ if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nxp,pca9552
+ - ibm,pca9552
+ then:
+ patternProperties:
+ "^led@[0-9a-f]+$":
+ properties:
+ reg:
+ maximum: 15
+ else:
+ if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nxp,pca9553
+ then:
+ patternProperties:
+ "^led@[0-9a-f]+$":
+ properties:
+ reg:
+ maximum: 3
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/leds-pca955x.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "red:power";
+ linux,default-trigger = "default-on";
+ type = <PCA955X_TYPE_LED>;
+ };
+ led@1 {
+ reg = <1>;
+ label = "green:power";
+ type = <PCA955X_TYPE_LED>;
+ };
+ led@2 {
+ reg = <2>;
+ label = "pca9552:yellow";
+ type = <PCA955X_TYPE_LED>;
+ };
+ led@3 {
+ reg = <3>;
+ label = "pca9552:white";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+...
--
2.25.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v1] dt-bindings: leds: pca955x: Convert text bindings to YAML
2024-10-16 5:29 [PATCH v1] dt-bindings: leds: pca955x: Convert text bindings to YAML Delphine CC Chiu
@ 2024-10-16 7:30 ` Krzysztof Kozlowski
2024-10-16 9:38 ` Delphine_CC_Chiu/WYHQ/Wiwynn
0 siblings, 1 reply; 3+ messages in thread
From: Krzysztof Kozlowski @ 2024-10-16 7:30 UTC (permalink / raw)
To: Delphine CC Chiu
Cc: patrick, Pavel Machek, Lee Jones, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Nate Case, Ricky CX Wu,
linux-leds, devicetree, linux-kernel
On Wed, Oct 16, 2024 at 01:29:38PM +0800, Delphine CC Chiu wrote:
> From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
>
> Convert the text bindings of pca955x to YAML so it could be used to
> validate the DTS.
>
> Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
> ---
> .../devicetree/bindings/leds/leds-pca955x.txt | 89 ----------
> .../devicetree/bindings/leds/nxp,pca955x.yaml | 161 ++++++++++++++++++
> 2 files changed, 161 insertions(+), 89 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/leds/leds-pca955x.txt
> create mode 100644 Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt
> deleted file mode 100644
> index 817f460f3a72..000000000000
> --- a/Documentation/devicetree/bindings/leds/leds-pca955x.txt
> +++ /dev/null
> @@ -1,89 +0,0 @@
> -* NXP - pca955x LED driver
> -
> -The PCA955x family of chips are I2C LED blinkers whose pins not used
> -to control LEDs can be used as general purpose I/Os. The GPIO pins can
> -be input or output, and output pins can also be pulse-width controlled.
> -
> -Required properties:
> -- compatible : should be one of :
> - "nxp,pca9550"
> - "nxp,pca9551"
> - "nxp,pca9552"
> - "ibm,pca9552"
> - "nxp,pca9553"
> -- #address-cells: must be 1
> -- #size-cells: must be 0
> -- reg: I2C slave address. depends on the model.
> -
> -Optional properties:
> -- gpio-controller: allows pins to be used as GPIOs.
> -- #gpio-cells: must be 2.
> -- gpio-line-names: define the names of the GPIO lines
> -
> -LED sub-node properties:
> -- reg : number of LED line.
> - from 0 to 1 for the pca9550
> - from 0 to 7 for the pca9551
> - from 0 to 15 for the pca9552
> - from 0 to 3 for the pca9553
> -- type: (optional) either
> - PCA955X_TYPE_NONE
> - PCA955X_TYPE_LED
> - PCA955X_TYPE_GPIO
> - see dt-bindings/leds/leds-pca955x.h (default to LED)
> -- label : (optional)
> - see Documentation/devicetree/bindings/leds/common.txt
> -- linux,default-trigger : (optional)
> - see Documentation/devicetree/bindings/leds/common.txt
> -
> -Examples:
> -
> -pca9552: pca9552@60 {
> - compatible = "nxp,pca9552";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0x60>;
> -
> - gpio-controller;
> - #gpio-cells = <2>;
> - gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15";
> -
> - gpio@12 {
> - reg = <12>;
> - type = <PCA955X_TYPE_GPIO>;
> - };
> - gpio@13 {
> - reg = <13>;
> - type = <PCA955X_TYPE_GPIO>;
> - };
> - gpio@14 {
> - reg = <14>;
> - type = <PCA955X_TYPE_GPIO>;
> - };
> - gpio@15 {
> - reg = <15>;
> - type = <PCA955X_TYPE_GPIO>;
> - };
> -
> - led@0 {
> - label = "red:power";
> - linux,default-trigger = "default-on";
> - reg = <0>;
> - type = <PCA955X_TYPE_LED>;
> - };
> - led@1 {
> - label = "green:power";
> - reg = <1>;
> - type = <PCA955X_TYPE_LED>;
> - };
> - led@2 {
> - label = "pca9552:yellow";
> - reg = <2>;
> - type = <PCA955X_TYPE_LED>;
> - };
> - led@3 {
> - label = "pca9552:white";
> - reg = <3>;
> - type = <PCA955X_TYPE_LED>;
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
> new file mode 100644
> index 000000000000..70f8c1dfa75a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
> @@ -0,0 +1,161 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP PCA955X LED controllers
> +
> +maintainers:
> + - Nate Case <ncase@xes-inc.com>
> +
> +description: |
> + The PCA955x family of chips are I2C LED blinkers whose pins not used
> + to control LEDs can be used as general purpose I/Os. The GPIO pins can
> + be input or output, and output pins can also be pulse-width controlled.
> +
> + For more product information please see the link below:
> + - https://www.nxp.com/docs/en/data-sheet/PCA9552.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - nxp,pca9550
> + - nxp,pca9551
> + - nxp,pca9552
> + - ibm,pca9552
> + - nxp,pca9553
> +
> + reg:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + gpio-controller: true
> +
> + gpio-line-names:
> + minItems: 1
> + maxItems: 16
> +
> + '#gpio-cells':
Keep consistent quotes: " or '
> + const: 2
> +
> +patternProperties:
> + "^led@[0-9a-f]+$":
max is 15 leds, so f, thus '+' is not needed. Same in other places.
> + type: object
> + $ref: common.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + reg:
> + minimum: 0
drop minimum, but instead maxItems: 1
> + type:
> + description: |
> + Output configuration, see include/dt-bindings/leds/leds-pca955x.h
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 0
> + minimum: 0
> + maximum: 4
I see defines up to 2, not 4. Any changes in binding should be explained
in commit msg.
> +
> + required:
> + - reg
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - nxp,pca9550
> + then:
> + patternProperties:
> + "^led@[0-9a-f]+$":
> + properties:
> + reg:
> + maximum: 1
> + else:
> + if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - nxp,pca9551
> + then:
> + patternProperties:
> + "^led@[0-9a-f]+$":
> + properties:
> + reg:
> + maximum: 7
> + else:
> + if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - nxp,pca9552
> + - ibm,pca9552
> + then:
> + patternProperties:
> + "^led@[0-9a-f]+$":
> + properties:
> + reg:
> + maximum: 15
> + else:
> + if:
Do not nest else:if. It's not manageable. See other bindings...
> + properties:
> + compatible:
> + contains:
> + enum:
> + - nxp,pca9553
> + then:
> + patternProperties:
> + "^led@[0-9a-f]+$":
> + properties:
> + reg:
> + maximum: 3
> +
> +additionalProperties: false
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 3+ messages in thread* RE: [PATCH v1] dt-bindings: leds: pca955x: Convert text bindings to YAML
2024-10-16 7:30 ` Krzysztof Kozlowski
@ 2024-10-16 9:38 ` Delphine_CC_Chiu/WYHQ/Wiwynn
0 siblings, 0 replies; 3+ messages in thread
From: Delphine_CC_Chiu/WYHQ/Wiwynn @ 2024-10-16 9:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, Delphine_CC_Chiu/WYHQ/Wiwynn
Cc: patrick, Pavel Machek, Lee Jones, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Nate Case, Ricky CX Wu,
linux-leds, devicetree, linux-kernel
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: Wednesday, October 16, 2024 3:31 PM
> To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>
> Cc: patrick@stwcx.xyz; Pavel Machek <pavel@ucw.cz>; Lee Jones
> <lee@kernel.org>; Rob Herring <robh@kernel.org>; Krzysztof Kozlowski
> <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; Nate Case
> <ncase@xes-inc.com>; Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>;
> linux-leds@vger.kernel.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v1] dt-bindings: leds: pca955x: Convert text bindings to
> YAML
>
> [External Sender]
>
> [External Sender]
>
> On Wed, Oct 16, 2024 at 01:29:38PM +0800, Delphine CC Chiu wrote:
> > From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
> >
> > Convert the text bindings of pca955x to YAML so it could be used to
> > validate the DTS.
> >
> > Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
> > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
> > ---
> > .../devicetree/bindings/leds/leds-pca955x.txt | 89 ----------
> > .../devicetree/bindings/leds/nxp,pca955x.yaml | 161 ++++++++++++++++++
> > 2 files changed, 161 insertions(+), 89 deletions(-) delete mode
> > 100644 Documentation/devicetree/bindings/leds/leds-pca955x.txt
> > create mode 100644
> > Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt
> > b/Documentation/devicetree/bindings/leds/leds-pca955x.txt
> > deleted file mode 100644
> > index 817f460f3a72..000000000000
> > --- a/Documentation/devicetree/bindings/leds/leds-pca955x.txt
> > +++ /dev/null
> > @@ -1,89 +0,0 @@
> > -* NXP - pca955x LED driver
> > -
> > -The PCA955x family of chips are I2C LED blinkers whose pins not used
> > -to control LEDs can be used as general purpose I/Os. The GPIO pins
> > can -be input or output, and output pins can also be pulse-width controlled.
> > -
> > -Required properties:
> > -- compatible : should be one of :
> > - "nxp,pca9550"
> > - "nxp,pca9551"
> > - "nxp,pca9552"
> > - "ibm,pca9552"
> > - "nxp,pca9553"
> > -- #address-cells: must be 1
> > -- #size-cells: must be 0
> > -- reg: I2C slave address. depends on the model.
> > -
> > -Optional properties:
> > -- gpio-controller: allows pins to be used as GPIOs.
> > -- #gpio-cells: must be 2.
> > -- gpio-line-names: define the names of the GPIO lines
> > -
> > -LED sub-node properties:
> > -- reg : number of LED line.
> > - from 0 to 1 for the pca9550
> > - from 0 to 7 for the pca9551
> > - from 0 to 15 for the pca9552
> > - from 0 to 3 for the pca9553
> > -- type: (optional) either
> > - PCA955X_TYPE_NONE
> > - PCA955X_TYPE_LED
> > - PCA955X_TYPE_GPIO
> > - see dt-bindings/leds/leds-pca955x.h (default to LED)
> > -- label : (optional)
> > - see Documentation/devicetree/bindings/leds/common.txt
> > -- linux,default-trigger : (optional)
> > - see Documentation/devicetree/bindings/leds/common.txt
> > -
> > -Examples:
> > -
> > -pca9552: pca9552@60 {
> > - compatible = "nxp,pca9552";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - reg = <0x60>;
> > -
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > - gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15";
> > -
> > - gpio@12 {
> > - reg = <12>;
> > - type = <PCA955X_TYPE_GPIO>;
> > - };
> > - gpio@13 {
> > - reg = <13>;
> > - type = <PCA955X_TYPE_GPIO>;
> > - };
> > - gpio@14 {
> > - reg = <14>;
> > - type = <PCA955X_TYPE_GPIO>;
> > - };
> > - gpio@15 {
> > - reg = <15>;
> > - type = <PCA955X_TYPE_GPIO>;
> > - };
> > -
> > - led@0 {
> > - label = "red:power";
> > - linux,default-trigger = "default-on";
> > - reg = <0>;
> > - type = <PCA955X_TYPE_LED>;
> > - };
> > - led@1 {
> > - label = "green:power";
> > - reg = <1>;
> > - type = <PCA955X_TYPE_LED>;
> > - };
> > - led@2 {
> > - label = "pca9552:yellow";
> > - reg = <2>;
> > - type = <PCA955X_TYPE_LED>;
> > - };
> > - led@3 {
> > - label = "pca9552:white";
> > - reg = <3>;
> > - type = <PCA955X_TYPE_LED>;
> > - };
> > -};
> > diff --git a/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
> > b/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
> > new file mode 100644
> > index 000000000000..70f8c1dfa75a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
> > @@ -0,0 +1,161 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2
> > +---
> > +$id:
> > +https://urldefense.com/v3/__http://devicetree.org/schemas/leds/nxp,pc
> >
> +a955x.yaml*__;Iw!!J63qqgXj!PIbrsq8E67aNk4sJHGvfkCqhXd5PNeLXGzE4uXNe
> V5
> > +8pCETmSSk3Dxy1prR7fHmTRgTTAKMXAxas54MARw$
> > +$schema:
> > +https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.y
> >
> +aml*__;Iw!!J63qqgXj!PIbrsq8E67aNk4sJHGvfkCqhXd5PNeLXGzE4uXNeV58pCE
> TmS
> > +Sk3Dxy1prR7fHmTRgTTAKMXAxagMegPKw$
> > +
> > +title: NXP PCA955X LED controllers
> > +
> > +maintainers:
> > + - Nate Case <ncase@xes-inc.com>
> > +
> > +description: |
> > + The PCA955x family of chips are I2C LED blinkers whose pins not
> > +used
> > + to control LEDs can be used as general purpose I/Os. The GPIO pins
> > +can
> > + be input or output, and output pins can also be pulse-width controlled.
> > +
> > + For more product information please see the link below:
> > + -
> > + https://urldefense.com/v3/__https://www.nxp.com/docs/en/data-sheet/P
> > +
> CA9552.pdf__;!!J63qqgXj!PIbrsq8E67aNk4sJHGvfkCqhXd5PNeLXGzE4uXNeV58p
> > + CETmSSk3Dxy1prR7fHmTRgTTAKMXAxbzCK6mRw$
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - nxp,pca9550
> > + - nxp,pca9551
> > + - nxp,pca9552
> > + - ibm,pca9552
> > + - nxp,pca9553
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + gpio-controller: true
> > +
> > + gpio-line-names:
> > + minItems: 1
> > + maxItems: 16
> > +
> > + '#gpio-cells':
>
> Keep consistent quotes: " or '
>
Updated in v2.
> > + const: 2
> > +
> > +patternProperties:
> > + "^led@[0-9a-f]+$":
>
> max is 15 leds, so f, thus '+' is not needed. Same in other places.
>
Updated in v2.
> > + type: object
> > + $ref: common.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + reg:
> > + minimum: 0
>
> drop minimum, but instead maxItems: 1
>
Updated in v2.
>
> > + type:
> > + description: |
> > + Output configuration, see
> include/dt-bindings/leds/leds-pca955x.h
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + default: 0
> > + minimum: 0
> > + maximum: 4
>
> I see defines up to 2, not 4. Any changes in binding should be explained in
> commit msg.
Checked the leds-pca955x.h and set it to 2 in v2.
>
>
> > +
> > + required:
> > + - reg
> > +
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - nxp,pca9550
> > + then:
> > + patternProperties:
> > + "^led@[0-9a-f]+$":
> > + properties:
> > + reg:
> > + maximum: 1
> > + else:
> > + if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - nxp,pca9551
> > + then:
> > + patternProperties:
> > + "^led@[0-9a-f]+$":
> > + properties:
> > + reg:
> > + maximum: 7
> > + else:
> > + if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - nxp,pca9552
> > + - ibm,pca9552
> > + then:
> > + patternProperties:
> > + "^led@[0-9a-f]+$":
> > + properties:
> > + reg:
> > + maximum: 15
> > + else:
> > + if:
>
> Do not nest else:if. It's not manageable. See other bindings...
>
Updated in v2, Thanks.
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - nxp,pca9553
> > + then:
> > + patternProperties:
> > + "^led@[0-9a-f]+$":
> > + properties:
> > + reg:
> > + maximum: 3
> > +
> > +additionalProperties: false
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-10-16 9:38 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-10-16 5:29 [PATCH v1] dt-bindings: leds: pca955x: Convert text bindings to YAML Delphine CC Chiu
2024-10-16 7:30 ` Krzysztof Kozlowski
2024-10-16 9:38 ` Delphine_CC_Chiu/WYHQ/Wiwynn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®