* [PATCH v2 0/2] Add device tree for Ampere's Mt. Jefferson BMC
@ 2024-10-21 8:37 Chanh Nguyen
2024-10-21 8:37 ` [PATCH v2 1/2] dt-bindings: arm: aspeed: add Mt. Jefferson board Chanh Nguyen
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Chanh Nguyen @ 2024-10-21 8:37 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, OpenBMC Maillist, Open Source Submission
Cc: Phong Vo, Thang Nguyen, Quan Nguyen, Khanh Pham, Chanh Nguyen
The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson
hardware reference platform with AmpereOne(TM)M processor.
These patches add a device-tree and binding for the Ampere's Mt. Jefferson
BMC board.
Changes in v2:
- Document Mt. Jefferson board compatible [Krzysztof]
- Remove the PSU node with pmbus compatible [Andrew]
- Remove clock-names property in mac3 node [Andrew]
Chanh Nguyen (2):
dt-bindings: arm: aspeed: add Mt. Jefferson board
ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC
.../bindings/arm/aspeed/aspeed.yaml | 1 +
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 622 ++++++++++++++++++
3 files changed, 624 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v2 1/2] dt-bindings: arm: aspeed: add Mt. Jefferson board 2024-10-21 8:37 [PATCH v2 0/2] Add device tree for Ampere's Mt. Jefferson BMC Chanh Nguyen @ 2024-10-21 8:37 ` Chanh Nguyen 2024-10-21 19:50 ` Rob Herring (Arm) 2024-10-21 8:37 ` [PATCH v2 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC Chanh Nguyen ` (2 subsequent siblings) 3 siblings, 1 reply; 6+ messages in thread From: Chanh Nguyen @ 2024-10-21 8:37 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, OpenBMC Maillist, Open Source Submission Cc: Phong Vo, Thang Nguyen, Quan Nguyen, Khanh Pham, Chanh Nguyen Document Ampere's Mt. Jefferson BMC board compatible. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> --- Changes in v2: - Document Mt. Jefferson board compatible [Krzysztof] --- Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index 2f92b8ab08fa..65bf8a161348 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -74,6 +74,7 @@ properties: - description: AST2600 based boards items: - enum: + - ampere,mtjefferson-bmc - ampere,mtmitchell-bmc - aspeed,ast2600-evb - aspeed,ast2600-evb-a1 -- 2.43.0 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm: aspeed: add Mt. Jefferson board 2024-10-21 8:37 ` [PATCH v2 1/2] dt-bindings: arm: aspeed: add Mt. Jefferson board Chanh Nguyen @ 2024-10-21 19:50 ` Rob Herring (Arm) 0 siblings, 0 replies; 6+ messages in thread From: Rob Herring (Arm) @ 2024-10-21 19:50 UTC (permalink / raw) To: Chanh Nguyen Cc: OpenBMC Maillist, linux-kernel, Joel Stanley, linux-arm-kernel, Quan Nguyen, Open Source Submission, Phong Vo, Conor Dooley, Krzysztof Kozlowski, devicetree, Thang Nguyen, Andrew Jeffery, Khanh Pham, linux-aspeed On Mon, 21 Oct 2024 08:37:01 +0000, Chanh Nguyen wrote: > Document Ampere's Mt. Jefferson BMC board compatible. > > Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> > --- > Changes in v2: > - Document Mt. Jefferson board compatible [Krzysztof] > --- > Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + > 1 file changed, 1 insertion(+) > Acked-by: Rob Herring (Arm) <robh@kernel.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC 2024-10-21 8:37 [PATCH v2 0/2] Add device tree for Ampere's Mt. Jefferson BMC Chanh Nguyen 2024-10-21 8:37 ` [PATCH v2 1/2] dt-bindings: arm: aspeed: add Mt. Jefferson board Chanh Nguyen @ 2024-10-21 8:37 ` Chanh Nguyen 2024-10-21 17:58 ` [PATCH v2 0/2] " Rob Herring (Arm) 2024-10-21 23:08 ` Andrew Jeffery 3 siblings, 0 replies; 6+ messages in thread From: Chanh Nguyen @ 2024-10-21 8:37 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, OpenBMC Maillist, Open Source Submission Cc: Phong Vo, Thang Nguyen, Quan Nguyen, Khanh Pham, Chanh Nguyen The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson hardware reference platform with AmpereOne(TM)M processor. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> --- Changes in v2: - Remove the PSU node with pmbus compatible [Andrew] - Remove clock-names property in mac3 node [Andrew] --- arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 622 ++++++++++++++++++ 2 files changed, 623 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index c4f064e4b073..b1fb0853a789 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-amd-daytonax.dtb \ aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-ampere-mtjade.dtb \ + aspeed-bmc-ampere-mtjefferson.dtb \ aspeed-bmc-ampere-mtmitchell.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-asrock-e3c246d4i.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts new file mode 100644 index 000000000000..c435359a4bd9 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts @@ -0,0 +1,622 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright 2024 Ampere Computing LLC. + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Ampere Mt. Jefferson BMC"; + compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600"; + + aliases { + i2c20 = &i2c4_bus70_chn0; + i2c22 = &i2c4_bus70_chn2; + + /* + * I2C OCP alias port + */ + i2c30 = &ocpslot; + + /* + * I2C NVMe alias port + */ + i2c48 = &nvmeslot_0; + i2c49 = &nvmeslot_1; + i2c50 = &nvmeslot_2; + i2c51 = &nvmeslot_3; + i2c52 = &nvmeslot_4; + i2c53 = &nvmeslot_5; + i2c54 = &nvmeslot_6; + i2c55 = &nvmeslot_7; + i2c56 = &nvmeslot_8; + i2c57 = &nvmeslot_9; + i2c58 = &nvmeslot_10; + i2c59 = &nvmeslot_11; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; + + voltage_mon_reg: voltage-mon-regulator { + compatible = "regulator-fixed"; + regulator-name = "ltc2497_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + led-bmc-ready { + gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>; + }; + + led-sw-heartbeat { + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>; + }; + + led-identify { + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>; + }; + + led-fault { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, + <&adc_i2c_2 0>, <&adc_i2c_2 1>, + <&adc_i2c_2 2>, <&adc_i2c_2 3>, + <&adc_i2c_2 4>, <&adc_i2c_2 5>, + <&adc_i2c_2 6>, <&adc_i2c_2 7>, + <&adc_i2c_2 8>, <&adc_i2c_2 9>, + <&adc_i2c_2 10>, <&adc_i2c_2 11>, + <&adc_i2c_2 12>, <&adc_i2c_2 13>, + <&adc_i2c_2 14>, <&adc_i2c_2 15>, + <&adc_i2c_0 0>, <&adc_i2c_0 1>, + <&adc_i2c_0 2>, <&adc_i2c_0 3>, + <&adc_i2c_0 4>, <&adc_i2c_0 5>, + <&adc_i2c_0 6>, <&adc_i2c_0 7>, + <&adc_i2c_0 8>, <&adc_i2c_0 9>, + <&adc_i2c_0 10>, <&adc_i2c_0 11>, + <&adc_i2c_0 12>; + }; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + use-ncsi; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <20000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + bus-frequency = <1000000>; + multi-master; + mctp-controller; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; +}; + +&i2c4 { + status = "okay"; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c4_bus70_chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + pagesize = <32>; + }; + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + temperature-sensor@4a{ + compatible = "ti,tmp75"; + reg = <0x4a>; + }; + temperature-sensor@4b { + compatible = "ti,tmp464"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + status = "disabled"; + }; + channel@1 { + reg = <0x1>; + status = "disabled"; + }; + channel@2 { + reg = <0x2>; + status = "disabled"; + }; + channel@3 { + reg = <0x3>; + status = "disabled"; + }; + channel@4 { + reg = <0x4>; + }; + }; + temperature-sensor@4d { + compatible = "ti,tmp75"; + reg = <0x4d>; + }; + temperature-sensor@4e { + compatible = "ti,tmp75"; + reg = <0x4e>; + }; + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + temperature-sensor@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + + #address-cells = <1>; + #size-cells = <0>; + channel@1 { /* RTD1 */ + reg = <1>; + sensor-type = "temperature"; + temperature-mode = "thermistor"; + }; + }; + adc_i2c_0: adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&voltage_mon_reg>; + #io-channel-cells = <1>; + }; + }; + + i2c4_bus70_chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + adc_i2c_2: adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&voltage_mon_reg>; + #io-channel-cells = <1>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + i2c-mux@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + nvmeslot_8: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + nvmeslot_9: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + nvmeslot_10: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + nvmeslot_11: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + nvmeslot_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + nvmeslot_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + nvmeslot_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + nvmeslot_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; + + i2c-mux@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c-mux-idle-disconnect; + + ocpslot: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + status = "disabled"; + }; + channel@1 { + reg = <0x1>; + }; + }; + }; + + nvmeslot_0: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + nvmeslot_1: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + nvmeslot_2: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + nvmeslot_3: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; +}; + +&i2c8 { + status = "okay"; + + fan-controller@5c { + compatible = "onnn,adt7462"; + reg = <0x5c>; + }; +}; + +&i2c9 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + temperature-sensor@18 { + compatible = "jedec,jc-42.4-temp"; + reg = <0x18>; + }; + + temperature-sensor@1a { + compatible = "jedec,jc-42.4-temp"; + reg = <0x1a>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c14 { + status = "okay"; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + bmc_ast2600_cpu: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; +}; + +&i2c15 { + status = "okay"; + gpio_expander1: gpio-expander@22 { + compatible = "nxp,pca9535"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "presence-ocp1","presence-ocp2", + "","", + "","", + "","", + "","", + "","", + "","", + "",""; + }; +}; + +&adc0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default>; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n", + /*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete", + "chassis-id-sel", + /*C0-C7*/ "s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel", + "spd-sel", + /*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n", + "","","","", + /*E0-E7*/ "eth-phy-rst-n","eth-phy-int-n","","","","","","", + /*F0-F7*/ "s0-pcp-oc-warn-n","","power-chassis-control", + "cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","", + /*G0-G7*/ "","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr", + "led-fp-sta-amb", + /*H0-H7*/ "jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","", + "","", + /*I0-I7*/ "","","","","","","power-button","rtc-battery-voltage-read-enable", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","reset-button","","","", + /*M0-M7*/ "nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock", + "","","", + /*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb", + "jtag-dbgr-prsnt-n","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n", + "led-bmc-hb", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","identify-button","led-identify","","spi-nor-access","host0-ready","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", + "host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n", + "host0-shd-ack-n","s0-overtemp-n", + /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", + "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","vrd-prg-en-n","","","","host0-special-boot", + /*Z0-Z7*/ "","ps0-pgood","ps1-pgood","","","","",""; + + ocp-aux-pwren-hog { + gpio-hog; + gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ocp-aux-pwren"; + }; + +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel", + /*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1", + "","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","",""; +}; -- 2.43.0 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 0/2] Add device tree for Ampere's Mt. Jefferson BMC 2024-10-21 8:37 [PATCH v2 0/2] Add device tree for Ampere's Mt. Jefferson BMC Chanh Nguyen 2024-10-21 8:37 ` [PATCH v2 1/2] dt-bindings: arm: aspeed: add Mt. Jefferson board Chanh Nguyen 2024-10-21 8:37 ` [PATCH v2 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC Chanh Nguyen @ 2024-10-21 17:58 ` Rob Herring (Arm) 2024-10-21 23:08 ` Andrew Jeffery 3 siblings, 0 replies; 6+ messages in thread From: Rob Herring (Arm) @ 2024-10-21 17:58 UTC (permalink / raw) To: Chanh Nguyen Cc: OpenBMC Maillist, linux-arm-kernel, Conor Dooley, Khanh Pham, Quan Nguyen, linux-kernel, Phong Vo, Joel Stanley, Andrew Jeffery, linux-aspeed, Open Source Submission, devicetree, Krzysztof Kozlowski, Thang Nguyen On Mon, 21 Oct 2024 08:37:00 +0000, Chanh Nguyen wrote: > The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson > hardware reference platform with AmpereOne(TM)M processor. > > These patches add a device-tree and binding for the Ampere's Mt. Jefferson > BMC board. > > Changes in v2: > - Document Mt. Jefferson board compatible [Krzysztof] > - Remove the PSU node with pmbus compatible [Andrew] > - Remove clock-names property in mac3 node [Andrew] > > Chanh Nguyen (2): > dt-bindings: arm: aspeed: add Mt. Jefferson board > ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC > > .../bindings/arm/aspeed/aspeed.yaml | 1 + > arch/arm/boot/dts/aspeed/Makefile | 1 + > .../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 622 ++++++++++++++++++ > 3 files changed, 624 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > > -- > 2.43.0 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ampere-mtjefferson.dtb' for 20241021083702.9734-1-chanh@os.amperecomputing.com: arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb@1e6e0000/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: gpio@1e780000: 'ocp-aux-pwren-hog' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb@1e780000/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: lpc@1e789000: reg-io-width: 4 is not of type 'object' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb@1e780000/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb@1e780000/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb@1e790000/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb@1e790000/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dtb: /ahb/apb@1e790000/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma'] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 0/2] Add device tree for Ampere's Mt. Jefferson BMC 2024-10-21 8:37 [PATCH v2 0/2] Add device tree for Ampere's Mt. Jefferson BMC Chanh Nguyen ` (2 preceding siblings ...) 2024-10-21 17:58 ` [PATCH v2 0/2] " Rob Herring (Arm) @ 2024-10-21 23:08 ` Andrew Jeffery 3 siblings, 0 replies; 6+ messages in thread From: Andrew Jeffery @ 2024-10-21 23:08 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel, OpenBMC Maillist, Open Source Submission, Chanh Nguyen Cc: Phong Vo, Thang Nguyen, Quan Nguyen, Khanh Pham On Mon, 21 Oct 2024 08:37:00 +0000, Chanh Nguyen wrote: > The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson > hardware reference platform with AmpereOne(TM)M processor. > > These patches add a device-tree and binding for the Ampere's Mt. Jefferson > BMC board. > > Changes in v2: > - Document Mt. Jefferson board compatible [Krzysztof] > - Remove the PSU node with pmbus compatible [Andrew] > - Remove clock-names property in mac3 node [Andrew] > > [...] Thanks, I've applied this to be picked up through the BMC tree. -- Andrew Jeffery <andrew@codeconstruct.com.au> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2024-10-21 23:08 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2024-10-21 8:37 [PATCH v2 0/2] Add device tree for Ampere's Mt. Jefferson BMC Chanh Nguyen 2024-10-21 8:37 ` [PATCH v2 1/2] dt-bindings: arm: aspeed: add Mt. Jefferson board Chanh Nguyen 2024-10-21 19:50 ` Rob Herring (Arm) 2024-10-21 8:37 ` [PATCH v2 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC Chanh Nguyen 2024-10-21 17:58 ` [PATCH v2 0/2] " Rob Herring (Arm) 2024-10-21 23:08 ` Andrew Jeffery
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®