From: Vikram Sharma <quic_vikramsa@quicinc.com>
To: <rfoss@kernel.org>, <todor.too@gmail.com>,
<bryan.odonoghue@linaro.org>, <mchehab@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<akapatra@quicinc.com>, <hariramp@quicinc.com>,
<andersson@kernel.org>, <konradybcio@kernel.org>,
<hverkuil-cisco@xs4all.nl>, <cros-qcom-dts-watchers@chromium.org>,
<catalin.marinas@arm.com>, <will@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<quic_vikramsa@quicinc.com>, <linux-media@vger.kernel.org>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <kernel@quicinc.com>
Subject: [PATCH v4 5/6] arm64: dts: qcom: sc7280: Add support for camss
Date: Wed, 30 Oct 2024 16:23:46 +0530 [thread overview]
Message-ID: <20241030105347.2117034-6-quic_vikramsa@quicinc.com> (raw)
In-Reply-To: <20241030105347.2117034-1-quic_vikramsa@quicinc.com>
Add changes to support the camera subsystem on the SC7280.
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 175 +++++++++++++++++++++++++++
1 file changed, 175 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 55db1c83ef55..690051708dec 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4426,6 +4426,181 @@ cci1_i2c1: i2c-bus@1 {
};
};
+ camss: camss@acaf000 {
+ compatible = "qcom,sc7280-camss";
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&camcc CAM_CC_IFE_2_CSID_CLK>,
+ <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_2_AXI_CLK>,
+ <&camcc CAM_CC_IFE_2_CLK>,
+ <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_0_CLK>,
+ <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_1_CLK>,
+ <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>;
+
+ clock-names = "camnoc_axi",
+ "csi0",
+ "csi1",
+ "csi2",
+ "csi3",
+ "csi4",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "gcc_camera_ahb",
+ "gcc_camera_axi",
+ "soc_ahb",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe2_axi",
+ "vfe2",
+ "vfe2_cphy_rx",
+ "vfe0_lite",
+ "vfe0_lite_cphy_rx",
+ "vfe1_lite",
+ "vfe1_lite_cphy_rx";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_CAMERA_CFG 0>,
+ <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>;
+
+ interconnect-names = "ahb", "hf_0";
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ iommus = <&apps_smmu 0x800 0x4e0>;
+
+ power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+ <&camcc CAM_CC_IFE_1_GDSC>,
+ <&camcc CAM_CC_IFE_2_GDSC>,
+ <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ power-domains-names = "ife0", "ife1", "ife2", "top";
+
+ reg = <0x0 0x0acb3000 0x0 0x1000>,
+ <0x0 0x0acba000 0x0 0x1000>,
+ <0x0 0x0acc1000 0x0 0x1000>,
+ <0x0 0x0acc8000 0x0 0x1000>,
+ <0x0 0x0accf000 0x0 0x1000>,
+ <0x0 0x0ace0000 0x0 0x2000>,
+ <0x0 0x0ace2000 0x0 0x2000>,
+ <0x0 0x0ace4000 0x0 0x2000>,
+ <0x0 0x0ace6000 0x0 0x2000>,
+ <0x0 0x0ace8000 0x0 0x2000>,
+ <0x0 0x0acaf000 0x0 0x4000>,
+ <0x0 0x0acb6000 0x0 0x4000>,
+ <0x0 0x0acbd000 0x0 0x4000>,
+ <0x0 0x0acc4000 0x0 0x4000>,
+ <0x0 0x0accb000 0x0 0x4000>;
+
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ };
+ };
+ };
+
camcc: clock-controller@ad00000 {
compatible = "qcom,sc7280-camcc";
reg = <0 0x0ad00000 0 0x10000>;
--
2.25.1
next prev parent reply other threads:[~2024-10-30 10:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-30 10:53 [PATCH v4 0/6] media: qcom: camss: Add sc7280 support Vikram Sharma
2024-10-30 10:53 ` [PATCH v4 1/6] media: dt-bindings: media: camss: Add qcom,sc7280-camss binding Vikram Sharma
2024-10-30 11:10 ` Vladimir Zapolskiy
2024-11-01 10:09 ` Krzysztof Kozlowski
2024-10-30 10:53 ` [PATCH v4 2/6] media: qcom: camss: Sort CAMSS version enums and compatible strings Vikram Sharma
2024-10-30 10:53 ` [PATCH v4 3/6] media: qcom: camss: Add support for camss driver on SC7280 Vikram Sharma
2024-10-30 11:15 ` Vladimir Zapolskiy
2024-10-31 17:58 ` Bryan O'Donoghue
2024-10-30 10:53 ` [PATCH v4 4/6] media: qcom: camss: Restructure camss_link_entities Vikram Sharma
2024-10-30 11:17 ` Vladimir Zapolskiy
2024-10-30 10:53 ` Vikram Sharma [this message]
2024-10-31 18:09 ` [PATCH v4 5/6] arm64: dts: qcom: sc7280: Add support for camss Bryan O'Donoghue
2024-10-30 10:53 ` [PATCH v4 6/6] arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision mezzanine Vikram Sharma
2024-10-30 11:29 ` Vladimir Zapolskiy
2024-11-01 15:27 ` [PATCH v4 0/6] media: qcom: camss: Add sc7280 support Luca Weiss
[not found] ` <1f173036-279d-4802-bf04-cfa2d8066e68@quicinc.com>
2024-11-05 12:40 ` Luca Weiss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241030105347.2117034-6-quic_vikramsa@quicinc.com \
--to=quic_vikramsa@quicinc.com \
--cc=akapatra@quicinc.com \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=hariramp@quicinc.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=kernel@quicinc.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=todor.too@gmail.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®