From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>,
Frederic Weisbecker <frederic@kernel.org>,
John Stultz <jstultz@google.com>,
Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Eric Biederman <ebiederm@xmission.com>,
Oleg Nesterov <oleg@redhat.com>
Subject: [patch v6 01/20] posix-timers: Make signal delivery consistent
Date: Thu, 31 Oct 2024 16:46:24 +0100 (CET) [thread overview]
Message-ID: <20241031154424.613821401@linutronix.de> (raw)
In-Reply-To: <20241031151625.361697424@linutronix.de>
From: Thomas Gleixner <tglx@linutronix.de>
Signals of timers which are reprogammed, disarmed or deleted can deliver
signals related to the past. The POSIX spec is blury about this:
- "The effect of disarming or resetting a timer with pending expiration
notifications is unspecified."
- "The disposition of pending signals for the deleted timer is
unspecified."
In both cases it is reasonable to expect that pending signals are
discarded. Especially in the reprogramming case it does not make sense to
account for previous overruns or to deliver a signal for a timer which has
been disarmed. This makes the behaviour consistent and understandable.
Remove the si_sys_private check from the signal delivery code and invoke
posix_timer_deliver_signal() unconditionally for posix timer related
signals.
Change posix_timer_deliver_signal() so it controls the actual signal
delivery via the return value. It now instructs the signal code to drop the
signal when:
1) The timer does not longer exist in the hash table
2) The timer signal_seq value is not the same as the si_sys_private value
which was set when the signal was queued.
This is also a preparatory change to embed the sigqueue into the k_itimer
structure, which in turn allows to remove the si_sys_private magic.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
V6: Remove the sequence increment from delivery and turn the requeue
pending check into a WARN_ON_ONCE() (Frederic)
Move the sequence increment into the delete hook so that the exit
cleanup path is covered too
---
include/linux/posix-timers.h | 2 --
kernel/signal.c | 6 ++----
kernel/time/posix-cpu-timers.c | 2 +-
kernel/time/posix-timers.c | 28 ++++++++++++++++------------
4 files changed, 19 insertions(+), 19 deletions(-)
---
--- a/include/linux/posix-timers.h
+++ b/include/linux/posix-timers.h
@@ -137,8 +137,6 @@ static inline void clear_posix_cputimers
static inline void posix_cputimers_init_work(void) { }
#endif
-#define REQUEUE_PENDING 1
-
/**
* struct k_itimer - POSIX.1b interval timer structure.
* @list: List head for binding the timer to signals->posix_timers
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -550,10 +550,8 @@ static void collect_signal(int sig, stru
list_del_init(&first->list);
copy_siginfo(info, &first->info);
- *resched_timer =
- (first->flags & SIGQUEUE_PREALLOC) &&
- (info->si_code == SI_TIMER) &&
- (info->si_sys_private);
+ *resched_timer = (first->flags & SIGQUEUE_PREALLOC) &&
+ (info->si_code == SI_TIMER);
__sigqueue_free(first);
} else {
--- a/kernel/time/posix-cpu-timers.c
+++ b/kernel/time/posix-cpu-timers.c
@@ -746,7 +746,7 @@ static void __posix_cpu_timer_get(struct
* - Timers which expired, but the signal has not yet been
* delivered
*/
- if (iv && ((timer->it_signal_seq & REQUEUE_PENDING) || sigev_none))
+ if (iv && timer->it_status != POSIX_TIMER_ARMED)
expires = bump_cpu_timer(timer, now);
else
expires = cpu_timer_getexpires(&timer->it.cpu);
--- a/kernel/time/posix-timers.c
+++ b/kernel/time/posix-timers.c
@@ -269,7 +269,10 @@ bool posixtimer_deliver_signal(struct ke
if (!timr)
goto out;
- if (timr->it_interval && timr->it_signal_seq == info->si_sys_private) {
+ if (timr->it_signal_seq != info->si_sys_private)
+ goto out_unlock;
+
+ if (timr->it_interval && !WARN_ON_ONCE(timr->it_status != POSIX_TIMER_REQUEUE_PENDING)) {
timr->kclock->timer_rearm(timr);
timr->it_status = POSIX_TIMER_ARMED;
@@ -281,6 +284,7 @@ bool posixtimer_deliver_signal(struct ke
}
ret = true;
+out_unlock:
unlock_timer(timr, flags);
out:
spin_lock(¤t->sighand->siglock);
@@ -293,19 +297,18 @@ bool posixtimer_deliver_signal(struct ke
int posix_timer_queue_signal(struct k_itimer *timr)
{
enum posix_timer_state state = POSIX_TIMER_DISARMED;
- int ret, si_private = 0;
enum pid_type type;
+ int ret;
lockdep_assert_held(&timr->it_lock);
- if (timr->it_interval) {
+ if (timr->it_interval)
state = POSIX_TIMER_REQUEUE_PENDING;
- si_private = ++timr->it_signal_seq;
- }
+
timr->it_status = state;
type = !(timr->it_sigev_notify & SIGEV_THREAD_ID) ? PIDTYPE_TGID : PIDTYPE_PID;
- ret = send_sigqueue(timr->sigq, timr->it_pid, type, si_private);
+ ret = send_sigqueue(timr->sigq, timr->it_pid, type, timr->it_signal_seq);
/* If we failed to send the signal the timer stops. */
return ret > 0;
}
@@ -663,7 +666,7 @@ void common_timer_get(struct k_itimer *t
* is a SIGEV_NONE timer move the expiry time forward by intervals,
* so expiry is > now.
*/
- if (iv && (timr->it_signal_seq & REQUEUE_PENDING || sig_none))
+ if (iv && timr->it_status != POSIX_TIMER_ARMED)
timr->it_overrun += kc->timer_forward(timr, now);
remaining = kc->timer_remaining(timr, now);
@@ -863,8 +866,6 @@ void posix_timer_set_common(struct k_iti
else
timer->it_interval = 0;
- /* Prevent reloading in case there is a signal pending */
- timer->it_signal_seq = (timer->it_signal_seq + 2) & ~REQUEUE_PENDING;
/* Reset overrun accounting */
timer->it_overrun_last = 0;
timer->it_overrun = -1LL;
@@ -882,8 +883,6 @@ int common_timer_set(struct k_itimer *ti
if (old_setting)
common_timer_get(timr, old_setting);
- /* Prevent rearming by clearing the interval */
- timr->it_interval = 0;
/*
* Careful here. On SMP systems the timer expiry function could be
* active and spinning on timr->it_lock.
@@ -933,6 +932,9 @@ static int do_timer_settime(timer_t time
if (old_spec64)
old_spec64->it_interval = ktime_to_timespec64(timr->it_interval);
+ /* Prevent signal delivery and rearming. */
+ timr->it_signal_seq++;
+
kc = timr->kclock;
if (WARN_ON_ONCE(!kc || !kc->timer_set))
error = -EINVAL;
@@ -1001,7 +1003,6 @@ int common_timer_del(struct k_itimer *ti
{
const struct k_clock *kc = timer->kclock;
- timer->it_interval = 0;
if (kc->timer_try_to_cancel(timer) < 0)
return TIMER_RETRY;
timer->it_status = POSIX_TIMER_DISARMED;
@@ -1012,6 +1013,9 @@ static inline int timer_delete_hook(stru
{
const struct k_clock *kc = timer->kclock;
+ /* Prevent signal delivery and rearming. */
+ timer->it_signal_seq++;
+
if (WARN_ON_ONCE(!kc || !kc->timer_del))
return -EINVAL;
return kc->timer_del(timer);
next prev parent reply other threads:[~2024-10-31 15:46 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-31 15:46 [patch v6 00/20] posix-timers: Cure the SIG_IGN mess Thomas Gleixner
2024-10-31 15:46 ` Thomas Gleixner [this message]
2024-11-01 12:26 ` [patch v6 01/20] posix-timers: Make signal delivery consistent Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 02/20] posix-timers: Make signal overrun accounting sensible Thomas Gleixner
2024-11-01 12:51 ` Frederic Weisbecker
2024-11-01 20:36 ` Thomas Gleixner
2024-11-02 19:41 ` Thomas Gleixner
2024-11-02 22:57 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 03/20] posix-cpu-timers: Cleanup the firing logic Thomas Gleixner
2024-11-01 13:14 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 04/20] posix-cpu-timers: Use dedicated flag for CPU timer nanosleep Thomas Gleixner
2024-10-31 15:46 ` [patch v6 05/20] posix-timers: Add a refcount to struct k_itimer Thomas Gleixner
2024-10-31 15:46 ` [patch v6 06/20] signal: Split up __sigqueue_alloc() Thomas Gleixner
2024-10-31 15:46 ` [patch v6 07/20] signal: Provide posixtimer_sigqueue_init() Thomas Gleixner
2024-10-31 15:46 ` [patch v6 08/20] posix-timers: Store PID type in the timer Thomas Gleixner
2024-10-31 15:46 ` [patch v6 09/20] signal: Refactor send_sigqueue() Thomas Gleixner
2024-10-31 15:46 ` [patch v6 10/20] signal: Replace resched_timer logic Thomas Gleixner
2024-11-01 13:25 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 11/20] posix-timers: Embed sigqueue in struct k_itimer Thomas Gleixner
2024-10-31 15:46 ` [patch v6 12/20] signal: Cleanup unused posix-timer leftovers Thomas Gleixner
2024-10-31 15:46 ` [patch v6 13/20] posix-timers: Move sequence logic into struct k_itimer Thomas Gleixner
2024-10-31 15:46 ` [patch v6 14/20] signal: Provide ignored_posix_timers list Thomas Gleixner
2024-10-31 15:46 ` [patch v6 15/20] posix-timers: Handle ignored list on delete and exit Thomas Gleixner
2024-11-01 13:47 ` Frederic Weisbecker
2024-11-01 20:38 ` Thomas Gleixner
2024-10-31 15:46 ` [patch v6 16/20] signal: Handle ignored signals in do_sigaction(action != SIG_IGN) Thomas Gleixner
2024-11-01 14:04 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 17/20] signal: Queue ignored posixtimers on ignore list Thomas Gleixner
2024-11-01 14:21 ` Frederic Weisbecker
2024-11-01 20:47 ` Thomas Gleixner
2024-11-02 14:49 ` Thomas Gleixner
2024-11-02 20:57 ` Thomas Gleixner
2024-11-02 23:46 ` Frederic Weisbecker
2024-11-03 9:44 ` Thomas Gleixner
2024-11-03 19:55 ` Frederic Weisbecker
2024-11-02 21:05 ` [patch v6.1 " Thomas Gleixner
2024-11-04 11:42 ` Frederic Weisbecker
2024-11-04 15:21 ` Thomas Gleixner
2024-11-04 21:31 ` Thomas Gleixner
2024-11-04 23:02 ` Frederic Weisbecker
2024-10-31 15:46 ` [patch v6 18/20] posix-timers: Cleanup SIG_IGN workaround leftovers Thomas Gleixner
2024-10-31 15:46 ` [patch v6 19/20] alarmtimers: Remove the throttle mechanism from alarm_forward_now() Thomas Gleixner
2024-10-31 15:46 ` [patch v6 20/20] alarmtimers: Remove return value from alarm functions Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241031154424.613821401@linutronix.de \
--to=tglx@linutronix.de \
--cc=anna-maria@linutronix.de \
--cc=ebiederm@xmission.com \
--cc=frederic@kernel.org \
--cc=jstultz@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=oleg@redhat.com \
--cc=peterz@infradead.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome