From: Jerome Brunet <jbrunet@baylibre.com>
To: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>,
Patrick Rudolph <patrick.rudolph@9elements.com>,
Naresh Solanki <naresh.solanki@9elements.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-doc@vger.kernel.org, devicetree@vger.kernel.org,
linux-i2c@vger.kernel.org,
Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v4 6/7] dt-bindings: hwmon: pmbus: add ti tps25990 support
Date: Tue, 05 Nov 2024 18:58:43 +0100 [thread overview]
Message-ID: <20241105-tps25990-v4-6-0e312ac70b62@baylibre.com> (raw)
In-Reply-To: <20241105-tps25990-v4-0-0e312ac70b62@baylibre.com>
Add DT binding for the Texas Instruments TPS25990 eFuse
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/hwmon/pmbus/ti,tps25990.yaml | 83 ++++++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 89 insertions(+)
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..f4115870e4509425e88c913f350789ffc8d396c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/ti,tps25990.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS25990 Stackable eFuse
+
+maintainers:
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+description:
+ The TI TPS25990 is an integrated, high-current circuit
+ protection and power management device with PMBUS interface
+
+properties:
+ compatible:
+ const: ti,tps25990
+
+ reg:
+ maxItems: 1
+
+ ti,rimon-micro-ohms:
+ description:
+ micro Ohms value of the resistance installed between the Imon pin
+ and the ground reference.
+
+ interrupts:
+ description: PMBUS SMB Alert Interrupt.
+ maxItems: 1
+
+ regulators:
+ type: object
+ description:
+ list of regulators provided by this controller.
+
+ properties:
+ vout:
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+ unevaluatedProperties: false
+
+ gpdac1:
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+ unevaluatedProperties: false
+
+ gpdac2:
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+ unevaluatedProperties: false
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - ti,rimon-micro-ohms
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hw-monitor@46 {
+ compatible = "ti,tps25990";
+ reg = <0x46>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <42 IRQ_TYPE_LEVEL_LOW>;
+ ti,rimon-micro-ohms = <1370000000>;
+
+ regulators {
+ cpu0_vout: vout {
+ regulator-name = "main_cpu0";
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 1b56b163f1219b73085cb5a45b130e2c96a2cb2b..4f21d7d2ce992f14d8c533f0c8742edb22a0db3f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22811,6 +22811,12 @@ F: include/linux/dma/k3-udma-glue.h
F: include/linux/dma/ti-cppi5.h
X: drivers/dma/ti/cppi41.c
+TEXAS INSTRUMENTS TPS25990 HARDWARE MONITOR DRIVER
+M: Jerome Brunet <jbrunet@baylibre.com>
+L: linux-hwmon@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml
+
TEXAS INSTRUMENTS TPS23861 PoE PSE DRIVER
M: Robert Marko <robert.marko@sartura.hr>
M: Luka Perkov <luka.perkov@sartura.hr>
--
2.45.2
next prev parent reply other threads:[~2024-11-05 17:59 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-05 17:58 [PATCH v4 0/7] hwmon: pmbus: add tps25990 efuse support Jerome Brunet
2024-11-05 17:58 ` [PATCH v4 1/7] hwmon: (pmbus) add documentation for existing flags Jerome Brunet
2024-11-06 15:57 ` Guenter Roeck
2024-11-05 17:58 ` [PATCH v4 2/7] hwmon: (pmbus/core) allow drivers to override WRITE_PROTECT Jerome Brunet
2024-11-06 15:58 ` Guenter Roeck
2024-11-05 17:58 ` [PATCH v4 3/7] hwmon: (pmbus/core) improve handling of write protected regulators Jerome Brunet
2024-11-05 17:58 ` [PATCH v4 4/7] hwmon: (pmbus/core) add wp module param Jerome Brunet
2024-11-05 17:58 ` [PATCH v4 5/7] hwmon: (pmbus/core) clear faults after setting smbalert mask Jerome Brunet
2024-11-06 16:03 ` Guenter Roeck
2024-11-05 17:58 ` Jerome Brunet [this message]
2024-11-06 16:05 ` [PATCH v4 6/7] dt-bindings: hwmon: pmbus: add ti tps25990 support Guenter Roeck
2024-11-05 17:58 ` [PATCH v4 7/7] hwmon: (pmbus/tps25990): add initial support Jerome Brunet
2024-11-06 18:59 ` Guenter Roeck
2024-11-08 8:47 ` Jerome Brunet
2024-11-06 16:12 ` [PATCH v4 0/7] hwmon: pmbus: add tps25990 efuse support Guenter Roeck
2024-11-08 8:52 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241105-tps25990-v4-6-0e312ac70b62@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=Delphine_CC_Chiu@Wiwynn.com \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=krzk+dt@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=naresh.solanki@9elements.com \
--cc=patrick.rudolph@9elements.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®