* [PATCH v2 0/1] polarfire gpio driver follow-ups @ 2024-11-13 12:01 Conor Dooley 2024-11-13 12:01 ` [PATCH v2 1/1] gpio: mpfs: add CoreGPIO support Conor Dooley 2024-11-13 15:30 ` [PATCH v2 0/1] polarfire gpio driver follow-ups Bartosz Golaszewski 0 siblings, 2 replies; 4+ messages in thread From: Conor Dooley @ 2024-11-13 12:01 UTC (permalink / raw) To: linux-gpio Cc: conor, Conor Dooley, Daire McNamara, Linus Walleij, Bartosz Golaszewski, linux-kernel From: Conor Dooley <conor.dooley@microchip.com> Yo, I realised last week, while rebasing the interrupt portion of the driver, that coregpio a compatible in the kernel as well as a dts user. Given how long the driver has taken to even get partially accepted, I waited to get it to gpio/for-next rather than showing up with last minute additions to it. Cheers, Conor. v2: - drop maintainers patch, it was applied on v1 - use non-of match data acquisition function CC: Conor Dooley <conor.dooley@microchip.com> CC: Daire McNamara <daire.mcnamara@microchip.com> CC: Linus Walleij <linus.walleij@linaro.org> CC: Bartosz Golaszewski <brgl@bgdev.pl> CC: linux-kernel@vger.kernel.org CC: linux-gpio@vger.kernel.org Conor Dooley (1): gpio: mpfs: add CoreGPIO support drivers/gpio/gpio-mpfs.c | 38 +++++++++++++++++++++++++++++++++----- 1 file changed, 33 insertions(+), 5 deletions(-) -- 2.45.2 ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/1] gpio: mpfs: add CoreGPIO support 2024-11-13 12:01 [PATCH v2 0/1] polarfire gpio driver follow-ups Conor Dooley @ 2024-11-13 12:01 ` Conor Dooley 2024-11-18 20:56 ` Linus Walleij 2024-11-13 15:30 ` [PATCH v2 0/1] polarfire gpio driver follow-ups Bartosz Golaszewski 1 sibling, 1 reply; 4+ messages in thread From: Conor Dooley @ 2024-11-13 12:01 UTC (permalink / raw) To: linux-gpio Cc: conor, Conor Dooley, Daire McNamara, Linus Walleij, Bartosz Golaszewski, linux-kernel From: Conor Dooley <conor.dooley@microchip.com> coreGPIO, which the "hard" core in PolarFire SoC is based on, has different offsets for inp/outp. Add some match_data handling to account for the differences. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> --- drivers/gpio/gpio-mpfs.c | 38 +++++++++++++++++++++++++++++++++----- 1 file changed, 33 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpio-mpfs.c b/drivers/gpio/gpio-mpfs.c index 3718121eb97a..561a961c97a6 100644 --- a/drivers/gpio/gpio-mpfs.c +++ b/drivers/gpio/gpio-mpfs.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/mod_devicetable.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/spinlock.h> @@ -30,11 +31,20 @@ #define MPFS_GPIO_TYPE_INT_LEVEL_HIGH 0x00 #define MPFS_GPIO_TYPE_INT_MASK GENMASK(7, 5) #define MPFS_IRQ_REG 0x80 + #define MPFS_INP_REG 0x84 +#define COREGPIO_INP_REG 0x90 #define MPFS_OUTP_REG 0x88 +#define COREGPIO_OUTP_REG 0xA0 + +struct mpfs_gpio_reg_offsets { + u8 inp; + u8 outp; +}; struct mpfs_gpio_chip { struct regmap *regs; + const struct mpfs_gpio_reg_offsets *offsets; struct gpio_chip gc; }; @@ -60,7 +70,7 @@ static int mpfs_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio_in regmap_update_bits(mpfs_gpio->regs, MPFS_GPIO_CTRL(gpio_index), MPFS_GPIO_DIR_MASK, MPFS_GPIO_EN_IN); - regmap_update_bits(mpfs_gpio->regs, MPFS_OUTP_REG, BIT(gpio_index), + regmap_update_bits(mpfs_gpio->regs, mpfs_gpio->offsets->outp, BIT(gpio_index), value << gpio_index); return 0; @@ -84,9 +94,9 @@ static int mpfs_gpio_get(struct gpio_chip *gc, unsigned int gpio_index) struct mpfs_gpio_chip *mpfs_gpio = gpiochip_get_data(gc); if (mpfs_gpio_get_direction(gc, gpio_index) == GPIO_LINE_DIRECTION_OUT) - return regmap_test_bits(mpfs_gpio->regs, MPFS_OUTP_REG, BIT(gpio_index)); + return regmap_test_bits(mpfs_gpio->regs, mpfs_gpio->offsets->outp, BIT(gpio_index)); else - return regmap_test_bits(mpfs_gpio->regs, MPFS_INP_REG, BIT(gpio_index)); + return regmap_test_bits(mpfs_gpio->regs, mpfs_gpio->offsets->inp, BIT(gpio_index)); } static void mpfs_gpio_set(struct gpio_chip *gc, unsigned int gpio_index, int value) @@ -95,7 +105,7 @@ static void mpfs_gpio_set(struct gpio_chip *gc, unsigned int gpio_index, int val mpfs_gpio_get(gc, gpio_index); - regmap_update_bits(mpfs_gpio->regs, MPFS_OUTP_REG, BIT(gpio_index), + regmap_update_bits(mpfs_gpio->regs, mpfs_gpio->offsets->outp, BIT(gpio_index), value << gpio_index); mpfs_gpio_get(gc, gpio_index); @@ -113,6 +123,8 @@ static int mpfs_gpio_probe(struct platform_device *pdev) if (!mpfs_gpio) return -ENOMEM; + mpfs_gpio->offsets = device_get_match_data(&pdev->dev); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return dev_err_probe(dev, PTR_ERR(base), "failed to ioremap memory resource\n"); @@ -145,8 +157,24 @@ static int mpfs_gpio_probe(struct platform_device *pdev) return devm_gpiochip_add_data(dev, &mpfs_gpio->gc, mpfs_gpio); } +static const struct mpfs_gpio_reg_offsets mpfs_reg_offsets = { + .inp = MPFS_INP_REG, + .outp = MPFS_OUTP_REG, +}; + +static const struct mpfs_gpio_reg_offsets coregpio_reg_offsets = { + .inp = COREGPIO_INP_REG, + .outp = COREGPIO_OUTP_REG, +}; + static const struct of_device_id mpfs_gpio_of_ids[] = { - { .compatible = "microchip,mpfs-gpio", }, + { + .compatible = "microchip,mpfs-gpio", + .data = &mpfs_reg_offsets, + }, { + .compatible = "microchip,coregpio-rtl-v3", + .data = &coregpio_reg_offsets, + }, { /* end of list */ } }; -- 2.45.2 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2 1/1] gpio: mpfs: add CoreGPIO support 2024-11-13 12:01 ` [PATCH v2 1/1] gpio: mpfs: add CoreGPIO support Conor Dooley @ 2024-11-18 20:56 ` Linus Walleij 0 siblings, 0 replies; 4+ messages in thread From: Linus Walleij @ 2024-11-18 20:56 UTC (permalink / raw) To: Conor Dooley Cc: linux-gpio, Conor Dooley, Daire McNamara, Bartosz Golaszewski, linux-kernel On Wed, Nov 13, 2024 at 1:01 PM Conor Dooley <conor@kernel.org> wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > coreGPIO, which the "hard" core in PolarFire SoC is based on, has > different offsets for inp/outp. Add some match_data handling to account > for the differences. > > Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Looks like a solid patch to me! Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2 0/1] polarfire gpio driver follow-ups 2024-11-13 12:01 [PATCH v2 0/1] polarfire gpio driver follow-ups Conor Dooley 2024-11-13 12:01 ` [PATCH v2 1/1] gpio: mpfs: add CoreGPIO support Conor Dooley @ 2024-11-13 15:30 ` Bartosz Golaszewski 1 sibling, 0 replies; 4+ messages in thread From: Bartosz Golaszewski @ 2024-11-13 15:30 UTC (permalink / raw) To: linux-gpio, Conor Dooley Cc: Bartosz Golaszewski, Conor Dooley, Daire McNamara, Linus Walleij, Bartosz Golaszewski, linux-kernel From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> On Wed, 13 Nov 2024 12:01:03 +0000, Conor Dooley wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > Yo, > > I realised last week, while rebasing the interrupt portion of the > driver, that coregpio a compatible in the kernel as well as a dts user. > Given how long the driver has taken to even get partially accepted, I > waited to get it to gpio/for-next rather than showing up with last > minute additions to it. > > [...] Applied, thanks! [1/1] gpio: mpfs: add CoreGPIO support commit: 65e936372d8f56f9faf3879925738cecc0a5f7e7 Best regards, -- Bartosz Golaszewski <bartosz.golaszewski@linaro.org> ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-11-18 20:56 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2024-11-13 12:01 [PATCH v2 0/1] polarfire gpio driver follow-ups Conor Dooley 2024-11-13 12:01 ` [PATCH v2 1/1] gpio: mpfs: add CoreGPIO support Conor Dooley 2024-11-18 20:56 ` Linus Walleij 2024-11-13 15:30 ` [PATCH v2 0/1] polarfire gpio driver follow-ups Bartosz Golaszewski
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®