From: Joey Lu <a0987203069@gmail.com>
To: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
mcoquelin.stm32@gmail.com, richardcochran@gmail.com
Cc: alexandre.torgue@foss.st.com, joabreu@synopsys.com,
ychuang3@nuvoton.com, schung@nuvoton.com, yclu4@nuvoton.com,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
openbmc@lists.ozlabs.org,
linux-stm32@st-md-mailman.stormreply.com,
Joey Lu <a0987203069@gmail.com>
Subject: [PATCH v2 0/3] Add support for Nuvoton MA35D1 GMAC
Date: Wed, 13 Nov 2024 13:18:54 +0800 [thread overview]
Message-ID: <20241113051857.12732-1-a0987203069@gmail.com> (raw)
This patch series is submitted to add GMAC support for Nuvoton MA35D1
SoC platform. This work involves implementing a GMAC driver glue layer
based on Synopsys DWMAC driver framework to leverage MA35D1's dual GMAC
interface capabilities.
Overview:
1. Added a GMAC driver glue layer for MA35D1 SoC, providing support for
the platform's two GMAC interfaces.
2. Added device tree settings, with specific configurations for our
development boards:
a. SOM board: Configured for two RGMII interfaces.
b. IoT board: Configured with one RGMII and one RMII interface.
3. Added dt-bindings for the GMAC interfaces.
v2:
- Update nuvoton,ma35d1-dwmac.yaml
- Rename file to align with the compatible property.
- Add an argument to syscon to replace mac-id,
with corresponding descriptions.
- Use tx-internal-delay-ps and rx-internal-delay-ps properties for
configurable path delay with corresponding descriptions,
allowing selection between GMAC internal and PHY.
- Add all supported phy-mode options.
- Remove unused properties.
- Update dtsi
- Modify syscon configuration to include an argument for
GMAC interface selection.
- Update dwmac-nuvoton driver
- Remove redundant device information print statements.
- Remove non-global parameters.
- Retrieve GMAC interface selection from the syscon argument.
- Parse Tx and Rx path delays by correct properties.
- Update configurations to support Wake-on-LAN.
Joey Lu (3):
dt-bindings: net: nuvoton: Add schema for MA35 family GMAC
arm64: dts: nuvoton: Add Ethernet nodes
net: stmmac: dwmac-nuvoton: Add dwmac support for MA35 family
.../bindings/net/nuvoton,ma35d1-dwmac.yaml | 170 +++++++++++++++++
.../boot/dts/nuvoton/ma35d1-iot-512m.dts | 12 ++
.../boot/dts/nuvoton/ma35d1-som-256m.dts | 10 +
arch/arm64/boot/dts/nuvoton/ma35d1.dtsi | 52 +++++
drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 ++
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
.../ethernet/stmicro/stmmac/dwmac-nuvoton.c | 179 ++++++++++++++++++
7 files changed, 435 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-nuvoton.c
--
2.34.1
next reply other threads:[~2024-11-13 5:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-13 5:18 Joey Lu [this message]
2024-11-13 5:18 ` [PATCH v2 1/3] dt-bindings: net: nuvoton: Add schema for MA35 family GMAC Joey Lu
2024-11-13 6:15 ` Rob Herring (Arm)
2024-11-14 9:43 ` Joey Lu
2024-11-13 5:18 ` [PATCH v2 2/3] arm64: dts: nuvoton: Add Ethernet nodes Joey Lu
2024-11-13 5:18 ` [PATCH v2 3/3] net: stmmac: dwmac-nuvoton: Add dwmac support for MA35 family Joey Lu
2024-11-13 11:58 ` kernel test robot
2024-11-14 2:56 ` Andrew Lunn
2024-11-14 9:49 ` Joey Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241113051857.12732-1-a0987203069@gmail.com \
--to=a0987203069@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=schung@nuvoton.com \
--cc=ychuang3@nuvoton.com \
--cc=yclu4@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®