From: Michael Ellerman <mpe@ellerman.id.au>
To: <linuxppc-dev@lists.ozlabs.org>
Cc: <linux-kernel@vger.kernel.org>, <jk@ozlabs.org>, <arnd@arndb.de>,
<geoff@infradead.org>
Subject: [RFC PATCH 03/20] powerpc: Remove PPC_PMI and driver
Date: Thu, 14 Nov 2024 23:50:52 +1100 [thread overview]
Message-ID: <20241114125111.599093-3-mpe@ellerman.id.au> (raw)
In-Reply-To: <20241114125111.599093-1-mpe@ellerman.id.au>
CONFIG_PPC_PMI is no longer selectable now that PPC_IBM_CELL_BLADE has
been removed, via the dependency on PPC_IBM_CELL_POWERBUTTON.
So remove it and the driver, and the pmi.h header which it was the only
user of.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/include/asm/pmi.h | 53 ------
arch/powerpc/platforms/cell/Kconfig | 9 -
arch/powerpc/sysdev/Makefile | 1 -
arch/powerpc/sysdev/pmi.c | 267 ----------------------------
4 files changed, 330 deletions(-)
delete mode 100644 arch/powerpc/include/asm/pmi.h
delete mode 100644 arch/powerpc/sysdev/pmi.c
diff --git a/arch/powerpc/include/asm/pmi.h b/arch/powerpc/include/asm/pmi.h
deleted file mode 100644
index 478f0a2fe7f4..000000000000
--- a/arch/powerpc/include/asm/pmi.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-#ifndef _POWERPC_PMI_H
-#define _POWERPC_PMI_H
-
-/*
- * Definitions for talking with PMI device on PowerPC
- *
- * PMI (Platform Management Interrupt) is a way to communicate
- * with the BMC (Baseboard Management Controller) via interrupts.
- * Unlike IPMI it is bidirectional and has a low latency.
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- */
-
-#ifdef __KERNEL__
-
-#define PMI_TYPE_FREQ_CHANGE 0x01
-#define PMI_TYPE_POWER_BUTTON 0x02
-#define PMI_READ_TYPE 0
-#define PMI_READ_DATA0 1
-#define PMI_READ_DATA1 2
-#define PMI_READ_DATA2 3
-#define PMI_WRITE_TYPE 4
-#define PMI_WRITE_DATA0 5
-#define PMI_WRITE_DATA1 6
-#define PMI_WRITE_DATA2 7
-
-#define PMI_ACK 0x80
-
-#define PMI_TIMEOUT 100
-
-typedef struct {
- u8 type;
- u8 data0;
- u8 data1;
- u8 data2;
-} pmi_message_t;
-
-struct pmi_handler {
- struct list_head node;
- u8 type;
- void (*handle_pmi_message) (pmi_message_t);
-};
-
-int pmi_register_handler(struct pmi_handler *);
-void pmi_unregister_handler(struct pmi_handler *);
-
-int pmi_send_message(pmi_message_t);
-
-#endif /* __KERNEL__ */
-#endif /* _POWERPC_PMI_H */
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index ee43d6092e31..758dc08a6dde 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -21,15 +21,6 @@ config SPU_BASE
bool
select PPC_COPRO_BASE
-config PPC_PMI
- tristate
- default y
- depends on CPU_FREQ_CBE_PMI || PPC_IBM_CELL_POWERBUTTON
- help
- PMI (Platform Management Interrupt) is a way to
- communicate with the BMC (Baseboard Management Controller).
- It is used in some IBM Cell blades.
-
config CBE_CPUFREQ_SPU_GOVERNOR
tristate "CBE frequency scaling based on SPU usage"
depends on SPU_FS && CPU_FREQ
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 24a177d164f1..0834a9a12600 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_PPC_MSI_BITMAP) += msi_bitmap.o
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
-obj-$(CONFIG_PPC_PMI) += pmi.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o fsl_mpic_err.o
diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c
deleted file mode 100644
index 2511e586fe31..000000000000
--- a/arch/powerpc/sysdev/pmi.c
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * pmi driver
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
- *
- * PMI (Platform Management Interrupt) is a way to communicate
- * with the BMC (Baseboard Management Controller) via interrupts.
- * Unlike IPMI it is bidirectional and has a low latency.
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- */
-
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/completion.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/workqueue.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/pmi.h>
-
-struct pmi_data {
- struct list_head handler;
- spinlock_t handler_spinlock;
- spinlock_t pmi_spinlock;
- struct mutex msg_mutex;
- pmi_message_t msg;
- struct completion *completion;
- struct platform_device *dev;
- int irq;
- u8 __iomem *pmi_reg;
- struct work_struct work;
-};
-
-static struct pmi_data *data;
-
-static irqreturn_t pmi_irq_handler(int irq, void *dev_id)
-{
- u8 type;
- int rc;
-
- spin_lock(&data->pmi_spinlock);
-
- type = ioread8(data->pmi_reg + PMI_READ_TYPE);
- pr_debug("pmi: got message of type %d\n", type);
-
- if (type & PMI_ACK && !data->completion) {
- printk(KERN_WARNING "pmi: got unexpected ACK message.\n");
- rc = -EIO;
- goto unlock;
- }
-
- if (data->completion && !(type & PMI_ACK)) {
- printk(KERN_WARNING "pmi: expected ACK, but got %d\n", type);
- rc = -EIO;
- goto unlock;
- }
-
- data->msg.type = type;
- data->msg.data0 = ioread8(data->pmi_reg + PMI_READ_DATA0);
- data->msg.data1 = ioread8(data->pmi_reg + PMI_READ_DATA1);
- data->msg.data2 = ioread8(data->pmi_reg + PMI_READ_DATA2);
- rc = 0;
-unlock:
- spin_unlock(&data->pmi_spinlock);
-
- if (rc == -EIO) {
- rc = IRQ_HANDLED;
- goto out;
- }
-
- if (data->msg.type & PMI_ACK) {
- complete(data->completion);
- rc = IRQ_HANDLED;
- goto out;
- }
-
- schedule_work(&data->work);
-
- rc = IRQ_HANDLED;
-out:
- return rc;
-}
-
-
-static const struct of_device_id pmi_match[] = {
- { .type = "ibm,pmi", .name = "ibm,pmi" },
- { .type = "ibm,pmi" },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, pmi_match);
-
-static void pmi_notify_handlers(struct work_struct *work)
-{
- struct pmi_handler *handler;
-
- spin_lock(&data->handler_spinlock);
- list_for_each_entry(handler, &data->handler, node) {
- pr_debug("pmi: notifying handler %p\n", handler);
- if (handler->type == data->msg.type)
- handler->handle_pmi_message(data->msg);
- }
- spin_unlock(&data->handler_spinlock);
-}
-
-static int pmi_of_probe(struct platform_device *dev)
-{
- struct device_node *np = dev->dev.of_node;
- int rc;
-
- if (data) {
- printk(KERN_ERR "pmi: driver has already been initialized.\n");
- rc = -EBUSY;
- goto out;
- }
-
- data = kzalloc(sizeof(struct pmi_data), GFP_KERNEL);
- if (!data) {
- printk(KERN_ERR "pmi: could not allocate memory.\n");
- rc = -ENOMEM;
- goto out;
- }
-
- data->pmi_reg = of_iomap(np, 0);
- if (!data->pmi_reg) {
- printk(KERN_ERR "pmi: invalid register address.\n");
- rc = -EFAULT;
- goto error_cleanup_data;
- }
-
- INIT_LIST_HEAD(&data->handler);
-
- mutex_init(&data->msg_mutex);
- spin_lock_init(&data->pmi_spinlock);
- spin_lock_init(&data->handler_spinlock);
-
- INIT_WORK(&data->work, pmi_notify_handlers);
-
- data->dev = dev;
-
- data->irq = irq_of_parse_and_map(np, 0);
- if (!data->irq) {
- printk(KERN_ERR "pmi: invalid interrupt.\n");
- rc = -EFAULT;
- goto error_cleanup_iomap;
- }
-
- rc = request_irq(data->irq, pmi_irq_handler, 0, "pmi", NULL);
- if (rc) {
- printk(KERN_ERR "pmi: can't request IRQ %d: returned %d\n",
- data->irq, rc);
- goto error_cleanup_iomap;
- }
-
- printk(KERN_INFO "pmi: found pmi device at addr %p.\n", data->pmi_reg);
-
- goto out;
-
-error_cleanup_iomap:
- iounmap(data->pmi_reg);
-
-error_cleanup_data:
- kfree(data);
-
-out:
- return rc;
-}
-
-static void pmi_of_remove(struct platform_device *dev)
-{
- struct pmi_handler *handler, *tmp;
-
- free_irq(data->irq, NULL);
- iounmap(data->pmi_reg);
-
- spin_lock(&data->handler_spinlock);
-
- list_for_each_entry_safe(handler, tmp, &data->handler, node)
- list_del(&handler->node);
-
- spin_unlock(&data->handler_spinlock);
-
- kfree(data);
- data = NULL;
-}
-
-static struct platform_driver pmi_of_platform_driver = {
- .probe = pmi_of_probe,
- .remove = pmi_of_remove,
- .driver = {
- .name = "pmi",
- .of_match_table = pmi_match,
- },
-};
-module_platform_driver(pmi_of_platform_driver);
-
-int pmi_send_message(pmi_message_t msg)
-{
- unsigned long flags;
- DECLARE_COMPLETION_ONSTACK(completion);
-
- if (!data)
- return -ENODEV;
-
- mutex_lock(&data->msg_mutex);
-
- data->msg = msg;
- pr_debug("pmi_send_message: msg is %08x\n", *(u32*)&msg);
-
- data->completion = &completion;
-
- spin_lock_irqsave(&data->pmi_spinlock, flags);
- iowrite8(msg.data0, data->pmi_reg + PMI_WRITE_DATA0);
- iowrite8(msg.data1, data->pmi_reg + PMI_WRITE_DATA1);
- iowrite8(msg.data2, data->pmi_reg + PMI_WRITE_DATA2);
- iowrite8(msg.type, data->pmi_reg + PMI_WRITE_TYPE);
- spin_unlock_irqrestore(&data->pmi_spinlock, flags);
-
- pr_debug("pmi_send_message: wait for completion\n");
-
- wait_for_completion_interruptible_timeout(data->completion,
- PMI_TIMEOUT);
-
- data->completion = NULL;
-
- mutex_unlock(&data->msg_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(pmi_send_message);
-
-int pmi_register_handler(struct pmi_handler *handler)
-{
- if (!data)
- return -ENODEV;
-
- spin_lock(&data->handler_spinlock);
- list_add_tail(&handler->node, &data->handler);
- spin_unlock(&data->handler_spinlock);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(pmi_register_handler);
-
-void pmi_unregister_handler(struct pmi_handler *handler)
-{
- if (!data)
- return;
-
- pr_debug("pmi: unregistering handler %p\n", handler);
-
- spin_lock(&data->handler_spinlock);
- list_del(&handler->node);
- spin_unlock(&data->handler_spinlock);
-}
-EXPORT_SYMBOL_GPL(pmi_unregister_handler);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
-MODULE_DESCRIPTION("IBM Platform Management Interrupt driver");
--
2.47.0
next prev parent reply other threads:[~2024-11-14 12:51 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-14 12:50 [RFC PATCH 01/20] powerpc/cell: Remove support for IBM Cell Blades Michael Ellerman
2024-11-14 12:50 ` [RFC PATCH 02/20] powerpc: Remove some Cell leftovers Michael Ellerman
2024-11-14 12:50 ` Michael Ellerman [this message]
2024-11-14 12:50 ` [RFC PATCH 04/20] powerpc: Remove IBM_CELL_BLADE & SPIDER_NET references Michael Ellerman
2024-11-14 12:50 ` [RFC PATCH 05/20] powerpc/cell: Remove CBE_CPUFREQ_SPU_GOVERNOR Michael Ellerman
2024-11-14 12:50 ` [RFC PATCH 06/20] powerpc/xmon: Remove SPU debug and disassembly Michael Ellerman
2024-11-14 12:50 ` [RFC PATCH 07/20] powerpc: Remove DCR_MMIO and the DCR generic layer Michael Ellerman
2024-11-14 12:50 ` [RFC PATCH 08/20] powerpc: Remove PPC_OF_PLATFORM_PCI Michael Ellerman
2024-11-14 12:50 ` [RFC PATCH 09/20] powerpc/io: Remove PPC_IO_WORKAROUNDS Michael Ellerman
2024-11-14 12:50 ` [RFC PATCH 10/20] powerpc/io: Remove PPC_INDIRECT_MMIO Michael Ellerman
2024-11-14 14:41 ` Arnd Bergmann
2024-11-14 12:51 ` [RFC PATCH 11/20] powerpc/io: Remove PCI_FIX_ADDR Michael Ellerman
2024-11-14 14:50 ` Arnd Bergmann
2024-11-14 12:51 ` [RFC PATCH 12/20] powerpc/io: Unhook MMIO accessors Michael Ellerman
2024-11-14 12:51 ` [RFC PATCH 13/20] powerpc/io: Remove unnecessary indirection Michael Ellerman
2024-11-14 15:24 ` Arnd Bergmann
2024-11-14 12:51 ` [RFC PATCH 14/20] powerpc: Remove UDBG_RTAS_CONSOLE Michael Ellerman
2024-11-14 12:51 ` [RFC PATCH 15/20] cpufreq: ppc_cbe: Remove powerpc Cell driver Michael Ellerman
2024-11-14 12:51 ` [RFC PATCH 16/20] EDAC/cell: " Michael Ellerman
2024-11-14 12:51 ` [RFC PATCH 17/20] net: spider_net: " Michael Ellerman
2024-11-14 14:55 ` Arnd Bergmann
2024-11-14 12:51 ` [RFC PATCH 18/20] net: toshiba: Remove reference to PPC_IBM_CELL_BLADE Michael Ellerman
2024-11-14 12:51 ` [RFC PATCH 19/20] docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR Michael Ellerman
2024-11-14 12:51 ` [RFC PATCH 20/20] genirq: Remove IRQ_EDGE_EOI_HANDLER Michael Ellerman
2024-11-26 17:41 ` Thomas Gleixner
2024-11-14 15:28 ` [RFC PATCH 01/20] powerpc/cell: Remove support for IBM Cell Blades Arnd Bergmann
2024-11-15 0:30 ` Jeremy Kerr
2024-11-27 21:27 ` Segher Boessenkool
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241114125111.599093-3-mpe@ellerman.id.au \
--to=mpe@ellerman.id.au \
--cc=arnd@arndb.de \
--cc=geoff@infradead.org \
--cc=jk@ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®