mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net, Andrew Lunn <andrew@lunn.ch>,
	Jakub Kicinski <kuba@kernel.org>,
	Eric Dumazet <edumazet@google.com>,
	Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>,
	Christophe Leroy <christophe.leroy@csgroup.eu>,
	Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	thomas.petazzoni@bootlin.com,
	"Herve Codina" <herve.codina@bootlin.com>,
	"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
	linuxppc-dev@lists.ozlabs.org
Subject: [PATCH net-next v2 04/10] net: freescale: ucc_geth: Fix WOL configuration
Date: Thu, 14 Nov 2024 16:35:55 +0100	[thread overview]
Message-ID: <20241114153603.307872-5-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20241114153603.307872-1-maxime.chevallier@bootlin.com>

The get/set_wol ethtool ops rely on querying the PHY for its WoL
capabilities, checking for the presence of a PHY and a PHY interrupts
isn't enough. Address that by cleaning up the WoL configuration
sequence.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
V2: Reworked the whole configuration sequence, and introduced an
internal attribute to store the PHY wol capabilities

 drivers/net/ethernet/freescale/ucc_geth.c     |  4 +--
 drivers/net/ethernet/freescale/ucc_geth.h     |  1 +
 .../net/ethernet/freescale/ucc_geth_ethtool.c | 36 +++++++++++++++----
 3 files changed, 32 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 13b8f8401c81..42254ee64a35 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3413,11 +3413,11 @@ static int ucc_geth_suspend(struct platform_device *ofdev, pm_message_t state)
 	 */
 	ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
 
-	if (ugeth->wol_en & WAKE_MAGIC) {
+	if (ugeth->wol_en & WAKE_MAGIC && !ugeth->phy_wol_en) {
 		setbits32(ugeth->uccf->p_uccm, UCC_GETH_UCCE_MPD);
 		setbits32(&ugeth->ug_regs->maccfg2, MACCFG2_MPE);
 		ucc_fast_enable(ugeth->uccf, COMM_DIR_RX_AND_TX);
-	} else if (!(ugeth->wol_en & WAKE_PHY)) {
+	} else if (!ugeth->phy_wol_en) {
 		phy_stop(ndev->phydev);
 	}
 
diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
index c08a56b7c9fe..e08cfc8d8904 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.h
+++ b/drivers/net/ethernet/freescale/ucc_geth.h
@@ -1217,6 +1217,7 @@ struct ucc_geth_private {
 	int oldduplex;
 	int oldlink;
 	int wol_en;
+	u32 phy_wol_en;
 
 	struct device_node *node;
 };
diff --git a/drivers/net/ethernet/freescale/ucc_geth_ethtool.c b/drivers/net/ethernet/freescale/ucc_geth_ethtool.c
index fb5254d7d1ba..89b323ef8145 100644
--- a/drivers/net/ethernet/freescale/ucc_geth_ethtool.c
+++ b/drivers/net/ethernet/freescale/ucc_geth_ethtool.c
@@ -346,26 +346,48 @@ static void uec_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	struct ucc_geth_private *ugeth = netdev_priv(netdev);
 	struct phy_device *phydev = netdev->phydev;
 
-	if (phydev && phydev->irq)
-		wol->supported |= WAKE_PHY;
+	wol->supported = 0;
+	wol->wolopts = 0;
+
+	if (phydev)
+		phy_ethtool_get_wol(phydev, wol);
+
 	if (qe_alive_during_sleep())
 		wol->supported |= WAKE_MAGIC;
 
-	wol->wolopts = ugeth->wol_en;
+	wol->wolopts |= ugeth->wol_en;
 }
 
 static int uec_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 {
 	struct ucc_geth_private *ugeth = netdev_priv(netdev);
 	struct phy_device *phydev = netdev->phydev;
+	int ret = 0;
 
-	if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
-		return -EINVAL;
-	else if (wol->wolopts & WAKE_PHY && (!phydev || !phydev->irq))
+	if (phydev) {
+		ret = phy_ethtool_set_wol(phydev, wol);
+		if (ret == -EOPNOTSUPP) {
+			ugeth->phy_wol_en = 0;
+		} else if (ret) {
+			return ret;
+		} else {
+			ugeth->phy_wol_en = wol->wolopts;
+			goto out;
+		}
+	}
+
+	/* If the PHY isn't handling the WoL and the MAC is asked to more than
+	 * WAKE_MAGIC, error-out
+	 */
+	if (!ugeth->phy_wol_en &&
+	    wol->wolopts & ~WAKE_MAGIC)
 		return -EINVAL;
-	else if (wol->wolopts & WAKE_MAGIC && !qe_alive_during_sleep())
+
+	if (wol->wolopts & WAKE_MAGIC &&
+	    !qe_alive_during_sleep())
 		return -EINVAL;
 
+out:
 	ugeth->wol_en = wol->wolopts;
 	device_set_wakeup_enable(&netdev->dev, ugeth->wol_en);
 
-- 
2.47.0


  parent reply	other threads:[~2024-11-14 15:36 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-14 15:35 [PATCH net-next v2 00/10] net: freescale: ucc_geth: Phylink conversion Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 01/10] net: freescale: ucc_geth: Drop support for the "interface" DT property Maxime Chevallier
2024-11-15 12:19   ` Simon Horman
2024-11-20  8:43     ` Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 02/10] net: freescale: ucc_geth: split adjust_link for phylink conversion Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 03/10] net: freescale: ucc_geth: Use netdev->phydev to access the PHY Maxime Chevallier
2024-11-14 15:35 ` Maxime Chevallier [this message]
2024-11-14 15:35 ` [PATCH net-next v2 05/10] net: freescale: ucc_geth: Use the correct type to store WoL opts Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 06/10] net: freescale: ucc_geth: Simplify frame length check Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 07/10] net: freescale: ucc_geth: Hardcode the preamble length to 7 bytes Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 08/10] net: freescale: ucc_geth: Move the serdes configuration around Maxime Chevallier
2024-11-14 15:36 ` [PATCH net-next v2 09/10] net: freescale: ucc_geth: Introduce a helper to check Reduced modes Maxime Chevallier
2024-11-14 15:36 ` [PATCH net-next v2 10/10] net: freescale: ucc_geth: phylink conversion Maxime Chevallier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241114153603.307872-5-maxime.chevallier@bootlin.com \
    --to=maxime.chevallier@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=christophe.leroy@csgroup.eu \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=herve.codina@bootlin.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=u.kleine-koenig@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®