mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2] ocfs2: heartbeat: replace simple_strtoul with kstrtoul
@ 2024-11-15  7:51 Daniel Yang
  2024-11-17 12:37 ` Joseph Qi
  0 siblings, 1 reply; 3+ messages in thread
From: Daniel Yang @ 2024-11-15  7:51 UTC (permalink / raw)
  To: Mark Fasheh, Joel Becker, Joseph Qi, GitAuthor: Daniel Yang,
	open list:ORACLE CLUSTER FILESYSTEM 2 (OCFS2),
	open list

The function simple_strtoul is deprecated due to ignoring overflows and
also requires clunkier error checking. Replacing with kstrtoul() leads
to safer code and cleaner error checking.

Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
---
v1->v2: moved ret definition and removed blank lines

 fs/ocfs2/cluster/heartbeat.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index dff18efbc..84ee5e340 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -1536,9 +1536,8 @@ static int o2hb_read_block_input(struct o2hb_region *reg,
 {
 	unsigned long bytes;
 	char *p = (char *)page;
-
-	bytes = simple_strtoul(p, &p, 0);
-	if (!p || (*p && (*p != '\n')))
+	int ret = kstrtoul(p, 0, &bytes);
+	if (ret)
 		return -EINVAL;
 
 	/* Heartbeat and fs min / max block sizes are the same. */
@@ -1623,12 +1622,13 @@ static ssize_t o2hb_region_blocks_store(struct config_item *item,
 	struct o2hb_region *reg = to_o2hb_region(item);
 	unsigned long tmp;
 	char *p = (char *)page;
+	int ret;
 
 	if (reg->hr_bdev_file)
 		return -EINVAL;
 
-	tmp = simple_strtoul(p, &p, 0);
-	if (!p || (*p && (*p != '\n')))
+	ret = kstrtoul(p, 0, &tmp);
+	if (ret)
 		return -EINVAL;
 
 	if (tmp > O2NM_MAX_NODES || tmp == 0)
@@ -2141,9 +2141,8 @@ static ssize_t o2hb_heartbeat_group_dead_threshold_store(struct config_item *ite
 {
 	unsigned long tmp;
 	char *p = (char *)page;
-
-	tmp = simple_strtoul(p, &p, 10);
-	if (!p || (*p && (*p != '\n')))
+	int ret = kstrtoul(p, 10, &tmp);
+	if (ret)
                 return -EINVAL;
 
 	/* this will validate ranges for us. */
-- 
2.39.5


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] ocfs2: heartbeat: replace simple_strtoul with kstrtoul
  2024-11-15  7:51 [PATCH v2] ocfs2: heartbeat: replace simple_strtoul with kstrtoul Daniel Yang
@ 2024-11-17 12:37 ` Joseph Qi
  2024-11-17 21:53   ` Daniel Yang
  0 siblings, 1 reply; 3+ messages in thread
From: Joseph Qi @ 2024-11-17 12:37 UTC (permalink / raw)
  To: Daniel Yang
  Cc: open list:ORACLE CLUSTER FILESYSTEM 2 (OCFS2),
	open list, Mark Fasheh, Joel Becker



On 11/15/24 3:51 PM, Daniel Yang wrote:
> The function simple_strtoul is deprecated due to ignoring overflows and
> also requires clunkier error checking. Replacing with kstrtoul() leads
> to safer code and cleaner error checking.
> 
> Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
> ---
> v1->v2: moved ret definition and removed blank lines
> 
>  fs/ocfs2/cluster/heartbeat.c | 15 +++++++--------
>  1 file changed, 7 insertions(+), 8 deletions(-)
> 
> diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
> index dff18efbc..84ee5e340 100644
> --- a/fs/ocfs2/cluster/heartbeat.c
> +++ b/fs/ocfs2/cluster/heartbeat.c
> @@ -1536,9 +1536,8 @@ static int o2hb_read_block_input(struct o2hb_region *reg,
>  {
>  	unsigned long bytes;
>  	char *p = (char *)page;
> -
> -	bytes = simple_strtoul(p, &p, 0);
> -	if (!p || (*p && (*p != '\n')))
> +	int ret = kstrtoul(p, 0, &bytes);
> +	if (ret)

The preferred code style is:

...
int ret;

ret = kstrtoul(p, 0, &bytes);
if (ret < 0)
	return ret;

>  		return -EINVAL;
>  
>  	/* Heartbeat and fs min / max block sizes are the same. */
> @@ -1623,12 +1622,13 @@ static ssize_t o2hb_region_blocks_store(struct config_item *item,
>  	struct o2hb_region *reg = to_o2hb_region(item);
>  	unsigned long tmp;
>  	char *p = (char *)page;
> +	int ret;
>  
>  	if (reg->hr_bdev_file)
>  		return -EINVAL;
>  
> -	tmp = simple_strtoul(p, &p, 0);
> -	if (!p || (*p && (*p != '\n')))
> +	ret = kstrtoul(p, 0, &tmp);
> +	if (ret)
>  		return -EINVAL;

Better to return 'ret' directly since it may be -ERANGE.

>  
>  	if (tmp > O2NM_MAX_NODES || tmp == 0)
> @@ -2141,9 +2141,8 @@ static ssize_t o2hb_heartbeat_group_dead_threshold_store(struct config_item *ite
>  {
>  	unsigned long tmp;
>  	char *p = (char *)page;
> -
> -	tmp = simple_strtoul(p, &p, 10);
> -	if (!p || (*p && (*p != '\n')))
> +	int ret = kstrtoul(p, 10, &tmp);
> +	if (ret)
>                  return -EINVAL;

Prefer to:

...
int ret;

ret = kstrtoul(p, 10, &tmp);
if (ret < 0)
	return ret;

Thanks,
Joseph
>  
>  	/* this will validate ranges for us. */


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] ocfs2: heartbeat: replace simple_strtoul with kstrtoul
  2024-11-17 12:37 ` Joseph Qi
@ 2024-11-17 21:53   ` Daniel Yang
  0 siblings, 0 replies; 3+ messages in thread
From: Daniel Yang @ 2024-11-17 21:53 UTC (permalink / raw)
  To: Joseph Qi
  Cc: open list:ORACLE CLUSTER FILESYSTEM 2 (OCFS2),
	open list, Mark Fasheh, Joel Becker

On Sun, Nov 17, 2024 at 4:37 AM Joseph Qi <joseph.qi@linux.alibaba.com> wrote:
>
>
>
> On 11/15/24 3:51 PM, Daniel Yang wrote:
> > The function simple_strtoul is deprecated due to ignoring overflows and
> > also requires clunkier error checking. Replacing with kstrtoul() leads
> > to safer code and cleaner error checking.
> >
> > Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
> > ---
> > v1->v2: moved ret definition and removed blank lines
> >
> >  fs/ocfs2/cluster/heartbeat.c | 15 +++++++--------
> >  1 file changed, 7 insertions(+), 8 deletions(-)
> >
> > diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
> > index dff18efbc..84ee5e340 100644
> > --- a/fs/ocfs2/cluster/heartbeat.c
> > +++ b/fs/ocfs2/cluster/heartbeat.c
> > @@ -1536,9 +1536,8 @@ static int o2hb_read_block_input(struct o2hb_region *reg,
> >  {
> >       unsigned long bytes;
> >       char *p = (char *)page;
> > -
> > -     bytes = simple_strtoul(p, &p, 0);
> > -     if (!p || (*p && (*p != '\n')))
> > +     int ret = kstrtoul(p, 0, &bytes);
> > +     if (ret)
>
> The preferred code style is:
>
> ...
> int ret;
>
> ret = kstrtoul(p, 0, &bytes);
> if (ret < 0)
>         return ret;
>
> >               return -EINVAL;
> >
> >       /* Heartbeat and fs min / max block sizes are the same. */
> > @@ -1623,12 +1622,13 @@ static ssize_t o2hb_region_blocks_store(struct config_item *item,
> >       struct o2hb_region *reg = to_o2hb_region(item);
> >       unsigned long tmp;
> >       char *p = (char *)page;
> > +     int ret;
> >
> >       if (reg->hr_bdev_file)
> >               return -EINVAL;
> >
> > -     tmp = simple_strtoul(p, &p, 0);
> > -     if (!p || (*p && (*p != '\n')))
> > +     ret = kstrtoul(p, 0, &tmp);
> > +     if (ret)
> >               return -EINVAL;
>
> Better to return 'ret' directly since it may be -ERANGE.
>
> >
> >       if (tmp > O2NM_MAX_NODES || tmp == 0)
> > @@ -2141,9 +2141,8 @@ static ssize_t o2hb_heartbeat_group_dead_threshold_store(struct config_item *ite
> >  {
> >       unsigned long tmp;
> >       char *p = (char *)page;
> > -
> > -     tmp = simple_strtoul(p, &p, 10);
> > -     if (!p || (*p && (*p != '\n')))
> > +     int ret = kstrtoul(p, 10, &tmp);
> > +     if (ret)
> >                  return -EINVAL;
>
> Prefer to:
>
> ...
> int ret;
>
> ret = kstrtoul(p, 10, &tmp);
> if (ret < 0)
>         return ret;
>
> Thanks,
> Joseph
> >
> >       /* this will validate ranges for us. */
>

Thanks for the clarification. I applied the changes and sent a v3 of the patch.

- Daniel

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2024-11-17 21:53 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-11-15  7:51 [PATCH v2] ocfs2: heartbeat: replace simple_strtoul with kstrtoul Daniel Yang
2024-11-17 12:37 ` Joseph Qi
2024-11-17 21:53   ` Daniel Yang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®