mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chenghai Huang <huangchenghai2@huawei.com>
To: <herbert@gondor.apana.org.au>, <davem@davemloft.net>
Cc: <linux-kernel@vger.kernel.org>, <linux-crypto@vger.kernel.org>,
	<liulongfang@huawei.com>, <qianweili@huawei.com>,
	<linwenkai6@hisilicon.com>
Subject: [PATCH v4 2/2] crypto: hisilicon/sec2 - fix for aead invalid authsize
Date: Fri, 15 Nov 2024 18:21:39 +0800	[thread overview]
Message-ID: <20241115102139.3793659-3-huangchenghai2@huawei.com> (raw)
In-Reply-To: <20241115102139.3793659-1-huangchenghai2@huawei.com>

From: Wenkai Lin <linwenkai6@hisilicon.com>

When the digest alg is HMAC-SHAx or another, the authsize may be less
than 4 bytes and mac_len of the BD is set to zero, the hardware considers
it a BD configuration error and reports a ras error, so the sec driver
needs to switch to software calculation in this case, this patch add a
check for it and remove unnecessary check that has been done by crypto.

Fixes: 2f072d75d1ab ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
---
 drivers/crypto/hisilicon/sec2/sec.h        |  1 +
 drivers/crypto/hisilicon/sec2/sec_crypto.c | 64 ++++++++++++----------
 2 files changed, 35 insertions(+), 30 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec.h b/drivers/crypto/hisilicon/sec2/sec.h
index 70c3bdedb6ba..df2c930df2fb 100644
--- a/drivers/crypto/hisilicon/sec2/sec.h
+++ b/drivers/crypto/hisilicon/sec2/sec.h
@@ -37,6 +37,7 @@ struct sec_aead_req {
 	u8 *a_ivin;
 	dma_addr_t a_ivin_dma;
 	struct aead_request *aead_req;
+	bool fallback;
 };
 
 /* SEC request of Crypto */
diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c
index 8db995279545..c3a474e18593 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.c
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c
@@ -1119,10 +1119,7 @@ static int sec_aead_setauthsize(struct crypto_aead *aead, unsigned int authsize)
 	struct sec_ctx *ctx = crypto_tfm_ctx(tfm);
 	struct sec_auth_ctx *a_ctx = &ctx->a_ctx;
 
-	if (unlikely(a_ctx->fallback_aead_tfm))
-		return crypto_aead_setauthsize(a_ctx->fallback_aead_tfm, authsize);
-
-	return 0;
+	return crypto_aead_setauthsize(a_ctx->fallback_aead_tfm, authsize);
 }
 
 static int sec_aead_fallback_setkey(struct sec_auth_ctx *a_ctx,
@@ -1159,13 +1156,7 @@ static int sec_aead_setkey(struct crypto_aead *tfm, const u8 *key,
 		}
 		memcpy(c_ctx->c_key, key, keylen);
 
-		if (unlikely(a_ctx->fallback_aead_tfm)) {
-			ret = sec_aead_fallback_setkey(a_ctx, tfm, key, keylen);
-			if (ret)
-				return ret;
-		}
-
-		return 0;
+		return sec_aead_fallback_setkey(a_ctx, tfm, key, keylen);
 	}
 
 	ret = crypto_authenc_extractkeys(&keys, key, keylen);
@@ -1190,6 +1181,12 @@ static int sec_aead_setkey(struct crypto_aead *tfm, const u8 *key,
 		goto bad_key;
 	}
 
+	ret = sec_aead_fallback_setkey(a_ctx, tfm, key, keylen);
+	if (ret) {
+		dev_err(dev, "set sec fallback key err!\n");
+		goto bad_key;
+	}
+
 	return 0;
 
 bad_key:
@@ -1917,8 +1914,10 @@ static void sec_aead_exit(struct crypto_aead *tfm)
 
 static int sec_aead_ctx_init(struct crypto_aead *tfm, const char *hash_name)
 {
+	struct aead_alg *alg = crypto_aead_alg(tfm);
 	struct sec_ctx *ctx = crypto_aead_ctx(tfm);
-	struct sec_auth_ctx *auth_ctx = &ctx->a_ctx;
+	struct sec_auth_ctx *a_ctx = &ctx->a_ctx;
+	const char *aead_name = alg->base.cra_name;
 	int ret;
 
 	ret = sec_aead_init(tfm);
@@ -1927,12 +1926,22 @@ static int sec_aead_ctx_init(struct crypto_aead *tfm, const char *hash_name)
 		return ret;
 	}
 
-	auth_ctx->hash_tfm = crypto_alloc_shash(hash_name, 0, 0);
-	if (IS_ERR(auth_ctx->hash_tfm)) {
+	a_ctx->hash_tfm = crypto_alloc_shash(hash_name, 0, 0);
+	if (IS_ERR(a_ctx->hash_tfm)) {
 		dev_err(ctx->dev, "aead alloc shash error!\n");
 		sec_aead_exit(tfm);
-		return PTR_ERR(auth_ctx->hash_tfm);
+		return PTR_ERR(a_ctx->hash_tfm);
+	}
+
+	a_ctx->fallback_aead_tfm = crypto_alloc_aead(aead_name, 0,
+						     CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_ASYNC);
+	if (IS_ERR(a_ctx->fallback_aead_tfm)) {
+		dev_err(ctx->dev, "aead driver alloc fallback tfm error!\n");
+		crypto_free_shash(ctx->a_ctx.hash_tfm);
+		sec_aead_exit(tfm);
+		return PTR_ERR(a_ctx->fallback_aead_tfm);
 	}
+	a_ctx->fallback = false;
 
 	return 0;
 }
@@ -1941,6 +1950,7 @@ static void sec_aead_ctx_exit(struct crypto_aead *tfm)
 {
 	struct sec_ctx *ctx = crypto_aead_ctx(tfm);
 
+	crypto_free_aead(ctx->a_ctx.fallback_aead_tfm);
 	crypto_free_shash(ctx->a_ctx.hash_tfm);
 	sec_aead_exit(tfm);
 }
@@ -2226,15 +2236,15 @@ static int sec_aead_spec_check(struct sec_ctx *ctx, struct sec_req *sreq)
 	struct device *dev = ctx->dev;
 	int ret;
 
-	if (unlikely(req->cryptlen + req->assoclen > MAX_INPUT_DATA_LEN ||
-	    req->assoclen > SEC_MAX_AAD_LEN)) {
-		dev_err(dev, "aead input spec error!\n");
+	/* Hardware does not handle cases where authsize is less than 4 bytes */
+	if (unlikely(sz < MIN_MAC_LEN)) {
+		sreq->aead_req.fallback = true;
 		return -EINVAL;
 	}
 
-	if (unlikely((c_mode == SEC_CMODE_GCM && sz < DES_BLOCK_SIZE) ||
-		     (c_mode == SEC_CMODE_CCM && (sz < MIN_MAC_LEN || sz & MAC_LEN_MASK)))) {
-		dev_err(dev, "aead input mac length error!\n");
+	if (unlikely(req->cryptlen + req->assoclen > MAX_INPUT_DATA_LEN ||
+	    req->assoclen > SEC_MAX_AAD_LEN)) {
+		dev_err(dev, "aead input spec error!\n");
 		return -EINVAL;
 	}
 
@@ -2280,7 +2290,7 @@ static int sec_aead_param_check(struct sec_ctx *ctx, struct sec_req *sreq)
 	if (ctx->sec->qm.ver == QM_HW_V2) {
 		if (unlikely(!req->cryptlen || (!sreq->c_req.encrypt &&
 			     req->cryptlen <= authsize))) {
-			ctx->a_ctx.fallback = true;
+			sreq->aead_req.fallback = true;
 			return -EINVAL;
 		}
 	}
@@ -2308,16 +2318,9 @@ static int sec_aead_soft_crypto(struct sec_ctx *ctx,
 				bool encrypt)
 {
 	struct sec_auth_ctx *a_ctx = &ctx->a_ctx;
-	struct device *dev = ctx->dev;
 	struct aead_request *subreq;
 	int ret;
 
-	/* Kunpeng920 aead mode not support input 0 size */
-	if (!a_ctx->fallback_aead_tfm) {
-		dev_err(dev, "aead fallback tfm is NULL!\n");
-		return -EINVAL;
-	}
-
 	subreq = aead_request_alloc(a_ctx->fallback_aead_tfm, GFP_KERNEL);
 	if (!subreq)
 		return -ENOMEM;
@@ -2349,10 +2352,11 @@ static int sec_aead_crypto(struct aead_request *a_req, bool encrypt)
 	req->aead_req.aead_req = a_req;
 	req->c_req.encrypt = encrypt;
 	req->ctx = ctx;
+	req->aead_req.fallback = false;
 
 	ret = sec_aead_param_check(ctx, req);
 	if (unlikely(ret)) {
-		if (ctx->a_ctx.fallback)
+		if (req->aead_req.fallback)
 			return sec_aead_soft_crypto(ctx, a_req, encrypt);
 		return -EINVAL;
 	}
-- 
2.33.0


  parent reply	other threads:[~2024-11-15 10:21 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-15 10:21 [PATCH v4 0/2] crypto: hisilicon - fix the authsize and icv problems of aead in sec Chenghai Huang
2024-11-15 10:21 ` [PATCH v4 1/2] crypto: hisilicon/sec2 - fix for aead icv error Chenghai Huang
2024-11-15 10:21 ` Chenghai Huang [this message]
2024-12-10  3:31   ` [PATCH v4 2/2] crypto: hisilicon/sec2 - fix for aead invalid authsize Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241115102139.3793659-3-huangchenghai2@huawei.com \
    --to=huangchenghai2@huawei.com \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linwenkai6@hisilicon.com \
    --cc=liulongfang@huawei.com \
    --cc=qianweili@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®