From: Lothar Rubusch <l.rubusch@gmail.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
dinguyen@kernel.org
Cc: marex@denx.de, s.trumtrar@pengutronix.de, l.rubusch@gmail.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 02/11] ARM: dts: socfpga: add Enclustra base-board dtsi
Date: Sat, 16 Nov 2024 13:10:16 +0000 [thread overview]
Message-ID: <20241116131025.114542-3-l.rubusch@gmail.com> (raw)
In-Reply-To: <20241116131025.114542-1-l.rubusch@gmail.com>
Add generic Enclustra base-board support for the Mercury+ PE1, the
Mercury+ PE3 and the Mercury+ ST1 board. The carrier boards can be
freely combined with the SoMs Mercury+ AA1, Mercury SA1 and
Mercury+ SA2.
Signed-off-by: Andreas Buerkler <andreas.buerkler@enclustra.com>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
.../socfpga_enclustra_mercury_pe1.dtsi | 33 +++++++++++
.../socfpga_enclustra_mercury_pe3.dtsi | 55 +++++++++++++++++++
.../socfpga_enclustra_mercury_st1.dtsi | 15 +++++
3 files changed, 103 insertions(+)
create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi
create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi
create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi
new file mode 100644
index 000000000..abc4bfb7f
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+ status = "okay";
+
+ eeprom@57 {
+ status = "okay";
+ compatible = "microchip,24c128";
+ reg = <0x57>;
+ pagesize = <64>;
+ label = "user eeprom";
+ address-width = <16>;
+ };
+
+ lm96080: temperature-sensor@2f {
+ status = "okay";
+ compatible = "national,lm80";
+ reg = <0x2f>;
+ };
+
+ si5338: clock-controller@70 {
+ compatible = "silabs,si5338";
+ reg = <0x70>;
+ };
+
+};
+
+&i2c_encl_fpga {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi
new file mode 100644
index 000000000..bc57b0680
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+ i2c-mux@74 {
+ status = "okay";
+ compatible = "nxp,pca9547";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@56 {
+ status = "okay";
+ compatible = "microchip,24c128";
+ reg = <0x56>;
+ pagesize = <64>;
+ label = "user eeprom";
+ address-width = <16>;
+ };
+
+ lm96080: temperature-sensor@2f {
+ status = "okay";
+ compatible = "national,lm80";
+ reg = <0x2f>;
+ };
+
+ pcal6416: gpio@20 {
+ status = "okay";
+ compatible = "nxp,pcal6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+};
+
+&i2c_encl_fpga {
+ status = "okay";
+
+ i2c-mux@75 {
+ status = "okay";
+ compatible = "nxp,pca9547";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ };
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi
new file mode 100644
index 000000000..4c00475f4
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+ si5338: clock-controller@70 {
+ compatible = "silabs,si5338";
+ reg = <0x70>;
+ };
+};
+
+&i2c_encl_fpga {
+ status = "okay";
+};
--
2.39.2
next prev parent reply other threads:[~2024-11-16 13:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-16 13:10 [PATCH v5 00/11] Add Enclustra Arria10 and Cyclone5 SoMs Lothar Rubusch
2024-11-16 13:10 ` [PATCH v5 01/11] ARM: dts: socfpga: add Enclustra boot-mode dtsi Lothar Rubusch
2024-11-16 13:10 ` Lothar Rubusch [this message]
2024-11-16 13:10 ` [PATCH v5 03/11] ARM: dts: socfpga: add Enclustra Mercury SA1 Lothar Rubusch
2024-11-16 13:10 ` [PATCH v5 04/11] dt-bindings: altera: " Lothar Rubusch
2024-11-16 13:10 ` [PATCH v5 05/11] ARM: dts: socfpga: add Enclustra Mercury+ SA2 Lothar Rubusch
2024-11-16 13:10 ` [PATCH v5 06/11] dt-bindings: altera: add binding for " Lothar Rubusch
2024-11-16 13:10 ` [PATCH v5 07/11] ARM: dts: socfpga: add Mercury AA1 combinations Lothar Rubusch
2024-11-16 13:10 ` [PATCH v5 08/11] dt-bindings: altera: " Lothar Rubusch
2024-11-16 13:10 ` [PATCH v5 09/11] ARM: dts: socfpga: removal of generic PE1 dts Lothar Rubusch
2024-11-16 13:10 ` [PATCH v5 10/11] dt-bindings: altera: " Lothar Rubusch
2024-11-16 13:10 ` [PATCH v5 11/11] ARM: dts: socfpga: add Enclustra SoM dts files Lothar Rubusch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241116131025.114542-3-l.rubusch@gmail.com \
--to=l.rubusch@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
--cc=robh@kernel.org \
--cc=s.trumtrar@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®