* [PATCH] Bluetooth: btnxpuart: Switch to SYSTEM_SLEEP_PM_OPS
@ 2024-11-22 13:59 Fabio Estevam
2024-11-26 13:47 ` Neeraj Sanjay Kale
0 siblings, 1 reply; 2+ messages in thread
From: Fabio Estevam @ 2024-11-22 13:59 UTC (permalink / raw)
To: luiz.dentz
Cc: amitkumar.karwar, neeraj.sanjaykale, marcel, linux-bluetooth,
linux-kernel, Fabio Estevam
From: Fabio Estevam <festevam@denx.de>
Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern SYSTEM_SLEEP_PM_OPS()
alternative.
The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows
the compiler to evaluate if the suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM_SLEEP ifdefery from the
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
drivers/bluetooth/btnxpuart.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 569f5b7d6e46..06c1093c70ab 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -1588,7 +1588,6 @@ static void nxp_serdev_remove(struct serdev_device *serdev)
hci_free_dev(hdev);
}
-#ifdef CONFIG_PM_SLEEP
static int nxp_serdev_suspend(struct device *dev)
{
struct btnxpuart_dev *nxpdev = dev_get_drvdata(dev);
@@ -1606,7 +1605,6 @@ static int nxp_serdev_resume(struct device *dev)
ps_control(psdata->hdev, PS_STATE_AWAKE);
return 0;
}
-#endif
static struct btnxpuart_data w8987_data __maybe_unused = {
.helper_fw_name = NULL,
@@ -1628,7 +1626,7 @@ static const struct of_device_id nxpuart_of_match_table[] __maybe_unused = {
MODULE_DEVICE_TABLE(of, nxpuart_of_match_table);
static const struct dev_pm_ops nxp_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(nxp_serdev_suspend, nxp_serdev_resume)
+ SYSTEM_SLEEP_PM_OPS(nxp_serdev_suspend, nxp_serdev_resume)
};
static struct serdev_device_driver nxp_serdev_driver = {
@@ -1637,7 +1635,7 @@ static struct serdev_device_driver nxp_serdev_driver = {
.driver = {
.name = "btnxpuart",
.of_match_table = of_match_ptr(nxpuart_of_match_table),
- .pm = &nxp_pm_ops,
+ .pm = pm_sleep_ptr(&nxp_pm_ops),
},
};
--
2.34.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH] Bluetooth: btnxpuart: Switch to SYSTEM_SLEEP_PM_OPS
2024-11-22 13:59 [PATCH] Bluetooth: btnxpuart: Switch to SYSTEM_SLEEP_PM_OPS Fabio Estevam
@ 2024-11-26 13:47 ` Neeraj Sanjay Kale
0 siblings, 0 replies; 2+ messages in thread
From: Neeraj Sanjay Kale @ 2024-11-26 13:47 UTC (permalink / raw)
To: Fabio Estevam, luiz.dentz
Cc: Amitkumar Karwar, marcel, linux-bluetooth, linux-kernel,
Fabio Estevam, Sherry Sun, Luke Wang
Hi Fabio,
Thank you for the patch and the improvement it brings along.
Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Thanks,
Neeraj
>
> From: Fabio Estevam <festevam@denx.de>
>
> Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern
> SYSTEM_SLEEP_PM_OPS() alternative.
>
> The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows
> the compiler to evaluate if the suspend/resume() functions are used at build
> time or are simply dead code.
>
> This allows removing the CONFIG_PM_SLEEP ifdefery from the
> suspend/resume() functions.
>
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> ---
> drivers/bluetooth/btnxpuart.c | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
> index 569f5b7d6e46..06c1093c70ab 100644
> --- a/drivers/bluetooth/btnxpuart.c
> +++ b/drivers/bluetooth/btnxpuart.c
> @@ -1588,7 +1588,6 @@ static void nxp_serdev_remove(struct
> serdev_device *serdev)
> hci_free_dev(hdev);
> }
>
> -#ifdef CONFIG_PM_SLEEP
> static int nxp_serdev_suspend(struct device *dev) {
> struct btnxpuart_dev *nxpdev = dev_get_drvdata(dev); @@ -1606,7
> +1605,6 @@ static int nxp_serdev_resume(struct device *dev)
> ps_control(psdata->hdev, PS_STATE_AWAKE);
> return 0;
> }
> -#endif
>
> static struct btnxpuart_data w8987_data __maybe_unused = {
> .helper_fw_name = NULL,
> @@ -1628,7 +1626,7 @@ static const struct of_device_id
> nxpuart_of_match_table[] __maybe_unused = { MODULE_DEVICE_TABLE(of,
> nxpuart_of_match_table);
>
> static const struct dev_pm_ops nxp_pm_ops = {
> - SET_SYSTEM_SLEEP_PM_OPS(nxp_serdev_suspend,
> nxp_serdev_resume)
> + SYSTEM_SLEEP_PM_OPS(nxp_serdev_suspend, nxp_serdev_resume)
> };
>
> static struct serdev_device_driver nxp_serdev_driver = { @@ -1637,7 +1635,7
> @@ static struct serdev_device_driver nxp_serdev_driver = {
> .driver = {
> .name = "btnxpuart",
> .of_match_table = of_match_ptr(nxpuart_of_match_table),
> - .pm = &nxp_pm_ops,
> + .pm = pm_sleep_ptr(&nxp_pm_ops),
> },
> };
>
> --
> 2.34.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-11-26 13:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-11-22 13:59 [PATCH] Bluetooth: btnxpuart: Switch to SYSTEM_SLEEP_PM_OPS Fabio Estevam
2024-11-26 13:47 ` Neeraj Sanjay Kale
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®