mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mostafa Saleh <smostafa@google.com>
To: iommu@lists.linux.dev, kvmarm@lists.linux.dev,
	 linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: catalin.marinas@arm.com, will@kernel.org, maz@kernel.org,
	 oliver.upton@linux.dev, joey.gouly@arm.com,
	suzuki.poulose@arm.com,  yuzenghui@huawei.com,
	robdclark@gmail.com, joro@8bytes.org,  robin.murphy@arm.com,
	jean-philippe@linaro.org, jgg@ziepe.ca,  nicolinc@nvidia.com,
	vdonnefort@google.com, qperret@google.com,  tabba@google.com,
	danielmentz@google.com, tzukui@google.com,
	 Mostafa Saleh <smostafa@google.com>
Subject: [RFC PATCH v2 54/58] iommu/arm-smmu-v3-kvm: Enable runtime PM
Date: Thu, 12 Dec 2024 18:04:18 +0000	[thread overview]
Message-ID: <20241212180423.1578358-55-smostafa@google.com> (raw)
In-Reply-To: <20241212180423.1578358-1-smostafa@google.com>

Enable runtime PM for the KVM SMMUv3 driver. The PM link to DMA masters
dictates when the SMMU should be powered on.

Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
---
 .../iommu/arm/arm-smmu-v3/arm-smmu-v3-kvm.c   | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-kvm.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-kvm.c
index deeed994a131..e987c273ff3c 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-kvm.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-kvm.c
@@ -11,6 +11,7 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 
 #include <kvm/arm_smmu_v3.h>
 
@@ -127,6 +128,12 @@ static struct iommu_device *kvm_arm_smmu_probe_device(struct device *dev)
 	master->ssid_bits = min(smmu->ssid_bits, master->ssid_bits);
 	xa_init(&master->domains);
 	dev_iommu_priv_set(dev, master);
+	if (!device_link_add(dev, smmu->dev,
+			     DL_FLAG_PM_RUNTIME |
+			     DL_FLAG_AUTOREMOVE_SUPPLIER)) {
+		kfree(master);
+		return ERR_PTR(-ENOLINK);
+	}
 
 	return &smmu->iommu;
 }
@@ -818,6 +825,14 @@ static int kvm_arm_smmu_probe(struct platform_device *pdev)
 	hyp_smmu->iommu.power_domain = host_smmu->power_domain;
 	kvm_arm_smmu_cur++;
 
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	/*
+	 * Take a reference to keep the SMMU powered on while the hypervisor
+	 * initializes it.
+	 */
+	pm_runtime_resume_and_get(dev);
+
 	return arm_smmu_register_iommu(smmu, &kvm_arm_smmu_ops, ioaddr);
 }
 
@@ -826,6 +841,8 @@ static void kvm_arm_smmu_remove(struct platform_device *pdev)
 	struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
 	struct host_arm_smmu_device *host_smmu = smmu_to_host(smmu);
 
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 	/*
 	 * There was an error during hypervisor setup. The hyp driver may
 	 * have already enabled the device, so disable it.
@@ -834,6 +851,30 @@ static void kvm_arm_smmu_remove(struct platform_device *pdev)
 	arm_smmu_update_gbpa(smmu, host_smmu->boot_gbpa, GBPA_ABORT);
 }
 
+static int kvm_arm_smmu_suspend(struct device *dev)
+{
+	struct arm_smmu_device *smmu = dev_get_drvdata(dev);
+	struct host_arm_smmu_device *host_smmu = smmu_to_host(smmu);
+
+	if (host_smmu->power_domain.type == KVM_POWER_DOMAIN_HOST_HVC)
+		return kvm_call_hyp_nvhe(__pkvm_host_hvc_pd, host_smmu->id, 0);
+	return 0;
+}
+
+static int kvm_arm_smmu_resume(struct device *dev)
+{
+	struct arm_smmu_device *smmu = dev_get_drvdata(dev);
+	struct host_arm_smmu_device *host_smmu = smmu_to_host(smmu);
+
+	if (host_smmu->power_domain.type == KVM_POWER_DOMAIN_HOST_HVC)
+		return kvm_call_hyp_nvhe(__pkvm_host_hvc_pd, host_smmu->id, 1);
+	return 0;
+}
+
+static const struct dev_pm_ops kvm_arm_smmu_pm_ops = {
+	SET_RUNTIME_PM_OPS(kvm_arm_smmu_suspend, kvm_arm_smmu_resume, NULL)
+};
+
 static const struct of_device_id arm_smmu_of_match[] = {
 	{ .compatible = "arm,smmu-v3", },
 	{ },
@@ -843,6 +884,7 @@ static struct platform_driver kvm_arm_smmu_driver = {
 	.driver = {
 		.name = "kvm-arm-smmu-v3",
 		.of_match_table = arm_smmu_of_match,
+		.pm = &kvm_arm_smmu_pm_ops,
 	},
 	.remove = kvm_arm_smmu_remove,
 };
@@ -877,6 +919,12 @@ static void kvm_arm_smmu_array_free(void)
 	free_pages((unsigned long)kvm_arm_smmu_array, order);
 }
 
+static int smmu_put_device(struct device *dev, void *data)
+{
+	pm_runtime_put(dev);
+	return 0;
+}
+
 static int kvm_arm_smmu_v3_init_drv(void)
 {
 	int ret;
@@ -905,6 +953,7 @@ static int kvm_arm_smmu_v3_init_drv(void)
 	 */
 	kvm_hyp_arm_smmu_v3_smmus = kvm_arm_smmu_array;
 	kvm_hyp_arm_smmu_v3_count = kvm_arm_smmu_count;
+
 	return 0;
 
 err_free:
@@ -931,4 +980,21 @@ static int kvm_arm_smmu_v3_register(void)
 					kern_hyp_va(lm_alias(&kvm_nvhe_sym(smmu_ops))));
 };
 
+/*
+ * KVM init hypervisor at device_sync init call,
+ * so we drop the PM references of the SMMU taken at probe
+ * at the late initcall where it's guaranteed the hypervisor
+ * has initialized the SMMUs.
+ */
+static int kvm_arm_smmu_v3_post_init(void)
+{
+	if (!kvm_arm_smmu_count)
+		return 0;
+
+	WARN_ON(driver_for_each_device(&kvm_arm_smmu_driver.driver, NULL,
+				       NULL, smmu_put_device));
+	return 0;
+}
+
 core_initcall(kvm_arm_smmu_v3_register);
+late_initcall(kvm_arm_smmu_v3_post_init);
-- 
2.47.0.338.g60cca15819-goog


  parent reply	other threads:[~2024-12-12 18:06 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-12 18:03 [RFC PATCH v2 00/58] KVM: Arm SMMUv3 driver for pKVM Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 01/58] iommu/io-pgtable-arm: Split the page table driver Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 02/58] iommu/io-pgtable-arm: Split initialization Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 03/58] iommu/io-pgtable: Add configure() operation Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 04/58] iommu/arm-smmu-v3: Move some definitions to arm64 include/ Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 05/58] iommu/arm-smmu-v3: Extract driver-specific bits from probe function Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 06/58] iommu/arm-smmu-v3: Move some functions to arm-smmu-v3-common.c Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 07/58] iommu/arm-smmu-v3: Move queue and table allocation " Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 08/58] iommu/arm-smmu-v3: Move firmware probe to arm-smmu-v3-common Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 09/58] iommu/arm-smmu-v3: Move IOMMU registration to arm-smmu-v3-common.c Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 10/58] iommu/arm-smmu-v3: Move common irq code to common file Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 11/58] KVM: arm64: pkvm: Add pkvm_udelay() Mostafa Saleh
2024-12-19 11:14   ` Quentin Perret
2024-12-19 11:21     ` Mostafa Saleh
2024-12-19 11:28       ` Quentin Perret
2024-12-12 18:03 ` [RFC PATCH v2 12/58] KVM: arm64: Add __pkvm_{use, unuse}_dma() Mostafa Saleh
2024-12-19 11:23   ` Quentin Perret
2024-12-12 18:03 ` [RFC PATCH v2 13/58] KVM: arm64: Introduce IOMMU driver infrastructure Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 14/58] KVM: arm64: pkvm: Add IOMMU hypercalls Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 15/58] KVM: arm64: iommu: Add a memory pool for the IOMMU Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 16/58] KVM: arm64: iommu: Add domains Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 17/58] KVM: arm64: iommu: Add {attach, detach}_dev Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 18/58] KVM: arm64: iommu: Add map/unmap() operations Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 19/58] KVM: arm64: iommu: support iommu_iotlb_gather Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 20/58] KVM: arm64: Support power domains Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 21/58] KVM: arm64: pkvm: Add __pkvm_host_add_remove_page() Mostafa Saleh
2024-12-19 11:10   ` Quentin Perret
2024-12-19 11:19     ` Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 22/58] KVM: arm64: pkvm: Support SCMI power domain Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 23/58] KVM: arm64: iommu: Support power management Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 24/58] KVM: arm64: iommu: Support DABT for IOMMU Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 25/58] KVM: arm64: iommu: Add SMMUv3 driver Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 26/58] KVM: arm64: smmu-v3: Initialize registers Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 27/58] KVM: arm64: smmu-v3: Setup command queue Mostafa Saleh
2025-01-23 13:01   ` Robin Murphy
2025-01-29 11:15     ` Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 28/58] KVM: arm64: smmu-v3: Setup stream table Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 29/58] KVM: arm64: smmu-v3: Setup event queue Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 30/58] KVM: arm64: smmu-v3: Reset the device Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 31/58] KVM: arm64: smmu-v3: Support io-pgtable Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 32/58] KVM: arm64: smmu-v3: Add {alloc/free}_domain Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 33/58] KVM: arm64: smmu-v3: Add TLB ops Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 34/58] KVM: arm64: smmu-v3: Add context descriptor functions Mostafa Saleh
2024-12-12 18:03 ` [RFC PATCH v2 35/58] KVM: arm64: smmu-v3: Add attach_dev Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 36/58] KVM: arm64: smmu-v3: Add detach_dev Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 37/58] iommu/io-pgtable: Generalize walker interface Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 38/58] iommu/io-pgtable-arm: Add post table walker callback Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 39/58] drivers/iommu: io-pgtable: Add IO_PGTABLE_QUIRK_UNMAP_INVAL Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 40/58] KVM: arm64: smmu-v3: Add map/unmap pages and iova_to_phys Mostafa Saleh
2024-12-12 19:44   ` Jason Gunthorpe
2024-12-13 19:48     ` Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 41/58] KVM: arm64: smmu-v3: Add DABT handler Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 42/58] iommu/arm-smmu-v3-kvm: Add host driver for pKVM Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 43/58] iommu/arm-smmu-v3-kvm: Pass a list of SMMU devices to the hypervisor Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 44/58] iommu/arm-smmu-v3-kvm: Validate device features Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 45/58] iommu/arm-smmu-v3-kvm: Allocate structures and reset device Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 46/58] KVM: arm64: Add function to topup generic allocator Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 47/58] KVM: arm64: Add macro for SMCCC call with all returns Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 48/58] iommu/arm-smmu-v3-kvm: Add function to topup IOMMU allocator Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 49/58] iommu/arm-smmu-v3-kvm: Add IOMMU ops Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 50/58] iommu/arm-smmu-v3-kvm: Add map, unmap and iova_to_phys operations Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 51/58] iommu/arm-smmu-v3-kvm: Support PASID operations Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 52/58] iommu/arm-smmu-v3-kvm: Add IRQs for the driver Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 53/58] iommu/arm-smmu-v3-kvm: Probe power domains Mostafa Saleh
2024-12-12 18:04 ` Mostafa Saleh [this message]
2024-12-12 18:04 ` [RFC PATCH v2 55/58] drivers/iommu: Add deferred map_sg operations Mostafa Saleh
2024-12-19 12:48   ` Robin Murphy
2024-12-19 14:24     ` Mostafa Saleh
2025-01-02 20:18       ` Jason Gunthorpe
2025-01-03 15:35         ` Mostafa Saleh
2025-01-03 15:47           ` Jason Gunthorpe
2025-01-08 12:13             ` Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 56/58] KVM: arm64: iommu: Add hypercall for map_sg Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 57/58] iommu/arm-smmu-v3-kvm: Implement sg operations Mostafa Saleh
2024-12-12 18:04 ` [RFC PATCH v2 58/58] iommu/arm-smmu-v3-kvm: Support command queue batching Mostafa Saleh
2024-12-12 19:41 ` [RFC PATCH v2 00/58] KVM: Arm SMMUv3 driver for pKVM Jason Gunthorpe
2024-12-13 19:39   ` Mostafa Saleh
2025-01-02 20:16     ` Jason Gunthorpe
2025-01-08 12:09       ` Mostafa Saleh
2025-01-16  6:39         ` Tian, Kevin
2025-01-16 19:14           ` Jason Gunthorpe
2025-01-17  6:57             ` Tian, Kevin
2025-01-22 11:04               ` Mostafa Saleh
2025-01-22 16:20                 ` Jason Gunthorpe
2025-01-22 17:17                   ` Mostafa Saleh
2025-01-22 19:16                     ` Jason Gunthorpe
2025-01-23  8:13                 ` Tian, Kevin
2025-01-29 12:16                   ` Mostafa Saleh
2025-01-16  8:51         ` Tian, Kevin
2025-01-22 11:28           ` Mostafa Saleh
2025-01-23  8:25             ` Tian, Kevin
2025-01-29 12:21               ` Mostafa Saleh
2025-01-29 13:50                 ` Jason Gunthorpe
2025-01-29 14:08                   ` Mostafa Saleh
2025-02-18  9:52                 ` Tian, Kevin
2025-01-16 19:19         ` Jason Gunthorpe
2025-01-22 11:46           ` Mostafa Saleh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241212180423.1578358-55-smostafa@google.com \
    --to=smostafa@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=danielmentz@google.com \
    --cc=iommu@lists.linux.dev \
    --cc=jean-philippe@linaro.org \
    --cc=jgg@ziepe.ca \
    --cc=joey.gouly@arm.com \
    --cc=joro@8bytes.org \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=nicolinc@nvidia.com \
    --cc=oliver.upton@linux.dev \
    --cc=qperret@google.com \
    --cc=robdclark@gmail.com \
    --cc=robin.murphy@arm.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tabba@google.com \
    --cc=tzukui@google.com \
    --cc=vdonnefort@google.com \
    --cc=will@kernel.org \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®